On Sat, 3 Jun 2023 16:55:06 +0300 Mikhail Kalashnikov <iunc...@gmail.com> wrote:
Hi, > From: iuncuim <iunc...@gmail.com> > > The H616 SoC has support for several types of DRAM: DDR3, LPDDR3, > DDR4 and LPDDR4. > At the moment, the driver only supports DDR3 memory. > Let's extend the driver to support the LPDDR3 memory. All "magic" > values obtained from the boot0. > --- > .../include/asm/arch-sunxi/dram_sun50i_h616.h | 1 + > arch/arm/mach-sunxi/Kconfig | 10 +- > arch/arm/mach-sunxi/dram_sun50i_h616.c | 215 ++++++++++++------ > arch/arm/mach-sunxi/dram_timings/Makefile | 1 + > .../arm/mach-sunxi/dram_timings/h616_lpddr3.c | 95 ++++++++ > 5 files changed, 255 insertions(+), 67 deletions(-) > create mode 100644 arch/arm/mach-sunxi/dram_timings/h616_lpddr3.c > > diff --git a/arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h > b/arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h > index 6db869c098..bf4188fa89 100644 > --- a/arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h > +++ b/arch/arm/include/asm/arch-sunxi/dram_sun50i_h616.h > @@ -148,6 +148,7 @@ check_member(sunxi_mctl_ctl_reg, unk_0x4240, 0x4240); > struct dram_para { > u32 clk; > enum sunxi_dram_type type; > + u8 phy_init[27]; > u8 cols; > u8 rows; > u8 ranks; > diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig > index 3ad37ef6ba..5ce82a955c 100644 > --- a/arch/arm/mach-sunxi/Kconfig > +++ b/arch/arm/mach-sunxi/Kconfig > @@ -487,6 +487,14 @@ config SUNXI_DRAM_H6_DDR3_1333 > This option is the DDR3 timing used by the boot0 on H6 TV boxes > which use a DDR3-1333 timing. > > +config SUNXI_DRAM_H616_LPDDR3 > + bool "LPDDR3 DRAM chips on the H616 DRAM controller" > + select SUNXI_DRAM_LPDDR3 > + depends on DRAM_SUN50I_H616 > + ---help--- > + This option is the LPDDR3 timing used by the stock boot0 by > + Allwinner. > + > config SUNXI_DRAM_H616_DDR3_1333 > bool "DDR3-1333 boot0 timings on the H616 DRAM controller" > select SUNXI_DRAM_DDR3 > @@ -1083,4 +1091,4 @@ config CHIP_DIP_SCAN > select W1_GPIO > select W1_EEPROM > select W1_EEPROM_DS24XXX > - select CMD_EXTENSION > \ No newline at end of file > + select CMD_EXTENSION > diff --git a/arch/arm/mach-sunxi/dram_sun50i_h616.c > b/arch/arm/mach-sunxi/dram_sun50i_h616.c > index 1f9416d6ea..d34b218ee5 100644 > --- a/arch/arm/mach-sunxi/dram_sun50i_h616.c > +++ b/arch/arm/mach-sunxi/dram_sun50i_h616.c > @@ -227,13 +227,6 @@ static void mctl_set_addrmap(struct dram_para *para) > mctl_ctl->addrmap[8] = 0x3F3F; > } > > -static const u8 phy_init[] = { > - 0x07, 0x0b, 0x02, 0x16, 0x0d, 0x0e, 0x14, 0x19, > - 0x0a, 0x15, 0x03, 0x13, 0x04, 0x0c, 0x10, 0x06, > - 0x0f, 0x11, 0x1a, 0x01, 0x12, 0x17, 0x00, 0x08, > - 0x09, 0x05, 0x18 > -}; > - So apart from the already existing code size problem mentioned in my cover letter reply, pulling this into struct dram_para also grows the code. Just #ifdef-ing this here for the two types helped: #ifdef CONFIG_SUNXI_DRAM_H616_DDR3_1333 static const u8 phy_init[] = { ... #elif defined(CONFIG_SUNXI_DRAM_H616_LPDDR3) static const u8 phy_init[] = { ... #endif I think we can live with #ifdef's here, since this is clearly separated and is actually just data. > static void mctl_phy_configure_odt(struct dram_para *para) > { > unsigned int val; > @@ -263,19 +256,31 @@ static void mctl_phy_configure_odt(struct dram_para > *para) > writel_relaxed(val, SUNXI_DRAM_PHY0_BASE + 0x34c); > > val = para->dx_odt & 0x1f; > - writel_relaxed(val, SUNXI_DRAM_PHY0_BASE + 0x380); > + if (para->type == SUNXI_DRAM_TYPE_LPDDR3) > + writel_relaxed(0, SUNXI_DRAM_PHY0_BASE + 0x380); > + else > + writel_relaxed(val, SUNXI_DRAM_PHY0_BASE + 0x380); > writel_relaxed(val, SUNXI_DRAM_PHY0_BASE + 0x384); > > val = (para->dx_odt >> 8) & 0x1f; > - writel_relaxed(val, SUNXI_DRAM_PHY0_BASE + 0x3c0); > + if (para->type == SUNXI_DRAM_TYPE_LPDDR3) > + writel_relaxed(0, SUNXI_DRAM_PHY0_BASE + 0x3c0); > + else > + writel_relaxed(val, SUNXI_DRAM_PHY0_BASE + 0x3c0); > writel_relaxed(val, SUNXI_DRAM_PHY0_BASE + 0x3c4); > > val = (para->dx_odt >> 16) & 0x1f; > - writel_relaxed(val, SUNXI_DRAM_PHY0_BASE + 0x400); > + if (para->type == SUNXI_DRAM_TYPE_LPDDR3) > + writel_relaxed(0, SUNXI_DRAM_PHY0_BASE + 0x400); > + else > + writel_relaxed(val, SUNXI_DRAM_PHY0_BASE + 0x400); > writel_relaxed(val, SUNXI_DRAM_PHY0_BASE + 0x404); > > val = (para->dx_odt >> 24) & 0x1f; > - writel_relaxed(val, SUNXI_DRAM_PHY0_BASE + 0x440); > + if (para->type == SUNXI_DRAM_TYPE_LPDDR3) > + writel_relaxed(0, SUNXI_DRAM_PHY0_BASE + 0x440); > + else > + writel_relaxed(val, SUNXI_DRAM_PHY0_BASE + 0x440); > writel_relaxed(val, SUNXI_DRAM_PHY0_BASE + 0x444); > > dmb(); > @@ -793,31 +798,47 @@ static void mctl_phy_ca_bit_delay_compensation(struct > dram_para *para) > writel(val, SUNXI_DRAM_PHY0_BASE + 0x7e0); > writel(val, SUNXI_DRAM_PHY0_BASE + 0x7f4); > > - /* following configuration is DDR3 specific */ > - val = (para->tpr10 >> 7) & 0x1e; > - if (para->tpr2 & 1) { > - writel(val, SUNXI_DRAM_PHY0_BASE + 0x794); > - if (para->ranks == 2) { > - val = (para->tpr10 >> 11) & 0x1e; > - writel(val, SUNXI_DRAM_PHY0_BASE + 0x7e4); > - } > - if (para->tpr0 & BIT(31)) { > - val = (para->tpr0 << 1) & 0x3e; > - writel(val, SUNXI_DRAM_PHY0_BASE + 0x790); > - writel(val, SUNXI_DRAM_PHY0_BASE + 0x7b8); > - writel(val, SUNXI_DRAM_PHY0_BASE + 0x7cc); > - } > - } else { > - writel(val, SUNXI_DRAM_PHY0_BASE + 0x7d4); > - if (para->ranks == 2) { > - val = (para->tpr10 >> 11) & 0x1e; > - writel(val, SUNXI_DRAM_PHY0_BASE + 0x79c); > + if (para->type == SUNXI_DRAM_TYPE_DDR3) { > + val = (para->tpr10 >> 7) & 0x1e; > + if (para->tpr2 & 1) { > + writel(val, SUNXI_DRAM_PHY0_BASE + 0x794); > + if (para->ranks == 2) { > + val = (para->tpr10 >> 11) & 0x1e; > + writel(val, SUNXI_DRAM_PHY0_BASE + 0x7e4); > + } > + if (para->tpr0 & BIT(31)) { > + val = (para->tpr0 << 1) & 0x3e; > + writel(val, SUNXI_DRAM_PHY0_BASE + 0x790); > + writel(val, SUNXI_DRAM_PHY0_BASE + 0x7b8); > + writel(val, SUNXI_DRAM_PHY0_BASE + 0x7cc); > + } > + } else { > + writel(val, SUNXI_DRAM_PHY0_BASE + 0x7d4); > + if (para->ranks == 2) { > + val = (para->tpr10 >> 11) & 0x1e; > + writel(val, SUNXI_DRAM_PHY0_BASE + 0x79c); > + } > + if (para->tpr0 & BIT(31)) { > + val = (para->tpr0 << 1) & 0x3e; > + writel(val, SUNXI_DRAM_PHY0_BASE + 0x78c); > + writel(val, SUNXI_DRAM_PHY0_BASE + 0x7a4); > + writel(val, SUNXI_DRAM_PHY0_BASE + 0x7b8); > + } > } > - if (para->tpr0 & BIT(31)) { > - val = (para->tpr0 << 1) & 0x3e; > - writel(val, SUNXI_DRAM_PHY0_BASE + 0x78c); > - writel(val, SUNXI_DRAM_PHY0_BASE + 0x7a4); > - writel(val, SUNXI_DRAM_PHY0_BASE + 0x7b8); > + } else if (para->type == SUNXI_DRAM_TYPE_LPDDR3) { > + val = (para->tpr10 >> 7) & 0x1e; > + if (para->tpr2 & 1) { > + writel(val, SUNXI_DRAM_PHY0_BASE + 0x7a0); > + if (para->ranks == 2) { > + val = (para->tpr10 >> 11) & 0x1e; > + writel(val, SUNXI_DRAM_PHY0_BASE + 0x79c); > + } > + } else { > + writel(val, SUNXI_DRAM_PHY0_BASE + 0x7e8); > + if (para->ranks == 2) { > + val = (para->tpr10 >> 11) & 0x1e; > + writel(val, SUNXI_DRAM_PHY0_BASE + 0x7f8); > + } > } > } > } > @@ -838,11 +859,22 @@ static bool mctl_phy_init(struct dram_para *para) > clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 0x3c, 0xf, val); > > if (para->tpr2 & 0x100) { > - val = 9; > - val2 = 7; > + if (para->type == SUNXI_DRAM_TYPE_DDR3) { > + val = 9; > + val2 = 7; > + } else if (para->type == SUNXI_DRAM_TYPE_LPDDR3) { > + // FIXME: don't know that values in this case, so fill > the same > + val = 14; > + val2 = 8; > + } > } else { > - val = 13; > - val2 = 9; > + if (para->type == SUNXI_DRAM_TYPE_DDR3) { > + val = 13; > + val2 = 9; > + } else if (para->type == SUNXI_DRAM_TYPE_LPDDR3) { > + val = 14; > + val2 = 8; > + } > } > > writel(val, SUNXI_DRAM_PHY0_BASE + 0x14); > @@ -861,18 +893,26 @@ static bool mctl_phy_init(struct dram_para *para) > writel(val2, SUNXI_DRAM_PHY0_BASE + 0x37c); > > ptr = (u32 *)(SUNXI_DRAM_PHY0_BASE + 0xc0); > - for (i = 0; i < ARRAY_SIZE(phy_init); i++) > - writel(phy_init[i], &ptr[i]); > + for (i = 0; i < ARRAY_SIZE(para->phy_init); i++) > + writel(para->phy_init[i], &ptr[i]); > > if (para->tpr10 & TPR10_CA_BIT_DELAY) > mctl_phy_ca_bit_delay_compensation(para); > > - writel(0x80, SUNXI_DRAM_PHY0_BASE + 0x3dc); > - writel(0x80, SUNXI_DRAM_PHY0_BASE + 0x45c); > + if (para->type == SUNXI_DRAM_TYPE_DDR3) > + val = 0x80; > + else if (para->type == SUNXI_DRAM_TYPE_LPDDR3) > + val = 0xc0; > + writel(val, SUNXI_DRAM_PHY0_BASE + 0x3dc); > + writel(val, SUNXI_DRAM_PHY0_BASE + 0x45c); > > mctl_phy_configure_odt(para); > > - clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 4, 7, 0xa); > + if (para->type == SUNXI_DRAM_TYPE_DDR3) { > + clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 4, 7, 0xa); > + } else if (para->type == SUNXI_DRAM_TYPE_LPDDR3) { > + clrsetbits_le32(SUNXI_DRAM_PHY0_BASE + 4, 7, 0xb); > + } > > if (para->clk <= 672) > writel(0xf, SUNXI_DRAM_PHY0_BASE + 0x20); > @@ -922,21 +962,39 @@ static bool mctl_phy_init(struct dram_para *para) > mr2 = 0x20; > } > > - writel(mr0, &mctl_ctl->mrctrl1); > - writel(0x80000030, &mctl_ctl->mrctrl0); > - mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0); > - > - writel(4, &mctl_ctl->mrctrl1); > - writel(0x80001030, &mctl_ctl->mrctrl0); > - mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0); > - > - writel(mr2, &mctl_ctl->mrctrl1); > - writel(0x80002030, &mctl_ctl->mrctrl0); > - mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0); > - > - writel(0, &mctl_ctl->mrctrl1); > - writel(0x80003030, &mctl_ctl->mrctrl0); > - mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0); > + if (para->type == SUNXI_DRAM_TYPE_DDR3) { > + writel(mr0, &mctl_ctl->mrctrl1); > + writel(0x80000030, &mctl_ctl->mrctrl0); > + mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0); > + > + writel(4, &mctl_ctl->mrctrl1); > + writel(0x80001030, &mctl_ctl->mrctrl0); > + mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0); > + > + writel(mr2, &mctl_ctl->mrctrl1); > + writel(0x80002030, &mctl_ctl->mrctrl0); > + mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0); > + > + writel(0, &mctl_ctl->mrctrl1); > + writel(0x80003030, &mctl_ctl->mrctrl0); > + mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0); > + } else if (para->type == SUNXI_DRAM_TYPE_LPDDR3) { > + writel(mr0, &mctl_ctl->mrctrl1); > + writel(0x800000f0, &mctl_ctl->mrctrl0); > + mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0); > + > + writel(4, &mctl_ctl->mrctrl1); > + writel(0x800000f0, &mctl_ctl->mrctrl0); > + mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0); > + > + writel(mr2, &mctl_ctl->mrctrl1); > + writel(0x800000f0, &mctl_ctl->mrctrl0); > + mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0); > + > + writel(0x301, &mctl_ctl->mrctrl1); > + writel(0x800000f0, &mctl_ctl->mrctrl0); > + mctl_await_completion(&mctl_ctl->mrctrl0, BIT(31), 0); > + } > > writel(0, SUNXI_DRAM_PHY0_BASE + 0x54); > > @@ -1011,7 +1069,10 @@ static bool mctl_ctrl_init(struct dram_para *para) > setbits_le32(&mctl_com->unk_0x008, 0xff00); > > reg_val = MSTR_BURST_LENGTH(8) | MSTR_ACTIVE_RANKS(para->ranks); > - reg_val |= MSTR_DEVICETYPE_DDR3 | MSTR_2TMODE; > + if (para->type == SUNXI_DRAM_TYPE_DDR3) > + reg_val |= MSTR_DEVICETYPE_DDR3 | MSTR_2TMODE; > + else if (para->type == SUNXI_DRAM_TYPE_LPDDR3) > + reg_val |= MSTR_DEVICETYPE_LPDDR3; > if (para->bus_full_width) > reg_val |= MSTR_BUSWIDTH_FULL; > else > @@ -1023,10 +1084,14 @@ static bool mctl_ctrl_init(struct dram_para *para) > else > writel(0x0201, &mctl_ctl->odtmap); > > - writel(0x06000400, &mctl_ctl->odtcfg); > - writel(0x06000400, &mctl_ctl->unk_0x2240); > - writel(0x06000400, &mctl_ctl->unk_0x3240); > - writel(0x06000400, &mctl_ctl->unk_0x4240); > + if (para->type == SUNXI_DRAM_TYPE_DDR3) > + reg_val = 0x06000400; > + else if (para->type == SUNXI_DRAM_TYPE_LPDDR3) > + reg_val = 0x09020400; > + writel(reg_val, &mctl_ctl->odtcfg); > + writel(reg_val, &mctl_ctl->unk_0x2240); > + writel(reg_val, &mctl_ctl->unk_0x3240); > + writel(reg_val, &mctl_ctl->unk_0x4240); > > writel(BIT(31), &mctl_com->cr); > > @@ -1155,13 +1220,31 @@ static unsigned long mctl_calc_size(struct dram_para > *para) > return (1ULL << (para->cols + para->rows + 3)) * width * para->ranks; > } > > +#define SUN50I_H616_DDR3_PHY_INIT \ > + { 0x07, 0x0b, 0x02, 0x16, 0x0d, 0x0e, 0x14, 0x19, \ > + 0x0a, 0x15, 0x03, 0x13, 0x04, 0x0c, 0x10, 0x06, \ > + 0x0f, 0x11, 0x1a, 0x01, 0x12, 0x17, 0x00, 0x08, \ > + 0x09, 0x05, 0x18 } > + > +#define SUN50I_H616_LPDDR3_PHY_INIT \ > + { 0x18, 0x06, 0x00, 0x05, 0x04, 0x03, 0x09, 0x02, \ > + 0x08, 0x01, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, \ > + 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x07, \ > + 0x17, 0x19, 0x1a } > + > unsigned long sunxi_dram_init(void) > { > struct sunxi_prcm_reg *const prcm = > (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE; > struct dram_para para = { > - .clk = CONFIG_DRAM_CLK, > +#ifdef CONFIG_SUNXI_DRAM_H616_DDR3_1333 > .type = SUNXI_DRAM_TYPE_DDR3, > + .phy_init = SUN50I_H616_DDR3_PHY_INIT, > +#elif defined(CONFIG_SUNXI_DRAM_H616_LPDDR3) > + .type = SUNXI_DRAM_TYPE_LPDDR3, > + .phy_init = SUN50I_H616_LPDDR3_PHY_INIT, > +#endif > + .clk = CONFIG_DRAM_CLK, > .dx_odt = CONFIG_DRAM_SUN50I_H616_DX_ODT, > .dx_dri = CONFIG_DRAM_SUN50I_H616_DX_DRI, > .ca_dri = CONFIG_DRAM_SUN50I_H616_CA_DRI, > @@ -1187,4 +1270,4 @@ unsigned long sunxi_dram_init(void) > mctl_set_master_priority(); > > return size; > -}; > +}; > \ No newline at end of file > diff --git a/arch/arm/mach-sunxi/dram_timings/Makefile > b/arch/arm/mach-sunxi/dram_timings/Makefile > index 4d78c04c9a..8bfd99448a 100644 > --- a/arch/arm/mach-sunxi/dram_timings/Makefile > +++ b/arch/arm/mach-sunxi/dram_timings/Makefile > @@ -4,3 +4,4 @@ obj-$(CONFIG_SUNXI_DRAM_DDR2_V3S) += ddr2_v3s.o > obj-$(CONFIG_SUNXI_DRAM_H6_LPDDR3) += h6_lpddr3.o > obj-$(CONFIG_SUNXI_DRAM_H6_DDR3_1333) += h6_ddr3_1333.o > obj-$(CONFIG_SUNXI_DRAM_H616_DDR3_1333) += h616_ddr3_1333.o > +obj-$(CONFIG_SUNXI_DRAM_H616_LPDDR3) += h616_lpddr3.o > diff --git a/arch/arm/mach-sunxi/dram_timings/h616_lpddr3.c > b/arch/arm/mach-sunxi/dram_timings/h616_lpddr3.c > new file mode 100644 > index 0000000000..dcd504cae4 > --- /dev/null > +++ b/arch/arm/mach-sunxi/dram_timings/h616_lpddr3.c > @@ -0,0 +1,95 @@ > +/* > + * sun50i H616 LPDDR3 timings, as programmed by Allwinner's boot0 Can you say what the frequency is you clock those chips with? I understand we maybe don't want to name some JEDEC speed bin here, since typically the used timings deviate from the standard anyway, but it would be good to know whether this is for higher or lower clocked chips. In general it would be good to also have a user in the tree, to test compilation. Cheers, Andre > + * > + * The chips are probably able to be driven by a faster clock, but boot0 > + * uses a more conservative timing (as usual). > + * > + * (C) Copyright 2020 Jernej Skrabec <jernej.skra...@siol.net> > + * Based on H6 DDR3 timings: > + * (C) Copyright 2018,2019 Arm Ltd. > + * > + * SPDX-License-Identifier: GPL-2.0+ > + */ > + > +#include <common.h> > +#include <asm/arch/dram.h> > +#include <asm/arch/cpu.h> > + > +void mctl_set_timing_params(struct dram_para *para) > +{ > + struct sunxi_mctl_ctl_reg * const mctl_ctl = > + (struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE; > + > + u8 tccd = 2; > + u8 tfaw = ns_to_t(50); > + u8 trrd = max(ns_to_t(6), 4); > + u8 trcd = ns_to_t(24); > + u8 trc = ns_to_t(70); > + u8 txp = max(ns_to_t(8), 3); > + u8 trtp = max(ns_to_t(8), 2); > + u8 trp = ns_to_t(27); > + u8 tras = ns_to_t(41); > + u16 trefi = ns_to_t(7800) / 64; > + u16 trfc = ns_to_t(210); > + u16 txsr = 88; > + > + u8 tmrw = 5; > + u8 tmrd = 5; > + u8 tmod = max(ns_to_t(15), 12); > + u8 tcke = max(ns_to_t(6), 3); > + u8 tcksrx = max(ns_to_t(12), 4); > + u8 tcksre = max(ns_to_t(12), 4); > + u8 tckesr = tcke + 2; > + u8 trasmax = (para->clk / 2) / 16; > + u8 txs = ns_to_t(360) / 32; > + u8 txsdll = 16; > + u8 txsabort = 4; > + u8 txsfast = 4; > + u8 tcl = 7; > + u8 tcwl = 4; > + u8 t_rdata_en = 12; > + u8 t_wr_lat = 6; > + > + u8 twtp = 16; > + u8 twr2rd = trtp + 9; > + u8 trd2wr = 13; > + > + /* DRAM timing grabbed from tvbox with LPDDR3 memory */ > + writel((twtp << 24) | (tfaw << 16) | (trasmax << 8) | tras, > + &mctl_ctl->dramtmg[0]); > + writel((txp << 16) | (trtp << 8) | trc, &mctl_ctl->dramtmg[1]); > + writel((tcwl << 24) | (tcl << 16) | (trd2wr << 8) | twr2rd, > + &mctl_ctl->dramtmg[2]); > + writel((tmrw << 20) | (tmrd << 12) | tmod, &mctl_ctl->dramtmg[3]); > + writel((trcd << 24) | (tccd << 16) | (trrd << 8) | trp, > + &mctl_ctl->dramtmg[4]); > + writel((tcksrx << 24) | (tcksre << 16) | (tckesr << 8) | tcke, > + &mctl_ctl->dramtmg[5]); > + /* Value suggested by ZynqMP manual and used by libdram */ > + writel((txp + 2) | 0x02020000, &mctl_ctl->dramtmg[6]); > + writel((txsfast << 24) | (txsabort << 16) | (txsdll << 8) | txs, > + &mctl_ctl->dramtmg[8]); > + writel(0x00020208, &mctl_ctl->dramtmg[9]); > + writel(0xE0C05, &mctl_ctl->dramtmg[10]); > + writel(0x440C021C, &mctl_ctl->dramtmg[11]); > + writel(8, &mctl_ctl->dramtmg[12]); > + writel(0xA100002, &mctl_ctl->dramtmg[13]); > + writel(txsr, &mctl_ctl->dramtmg[14]); > + > + writel(0x4f0112, &mctl_ctl->init[0]); > + writel(0x420000, &mctl_ctl->init[1]); > + writel(0xd05, &mctl_ctl->init[2]); > + writel(0x83001c, &mctl_ctl->init[3]); > + writel(0x00010000, &mctl_ctl->init[4]); > + > + writel(0, &mctl_ctl->dfimisc); > + clrsetbits_le32(&mctl_ctl->rankctl, 0xff0, 0x660); > + > + /* Configure DFI timing */ > + writel(t_wr_lat | 0x2000000 | (t_rdata_en << 16) | 0x808000, > + &mctl_ctl->dfitmg0); > + writel(0x100202, &mctl_ctl->dfitmg1); > + > + /* set refresh timing */ > + writel((trefi << 16) | trfc, &mctl_ctl->rfshtmg); > +}