Hi Peter, On 2023-06-11 22:22, Peter Robinson wrote: > Hi Jonas, > > This regresses the Rockpro64 build for me when building with gcc 12/13 > with the following error, if I remove CONFIG_LTO it builds, but > overlaps. > > /usr/bin/aarch64-linux-gnu-ld: > /usr/lib/gcc/aarch64-linux-gnu/13/libgcc.a(lse-init.o): in function > `init_have_lse_atomics': > /builddir/build/BUILD/gcc-13.1.1-20230519/aarch64-linux-gnu/aarch64-linux-gnu/libgcc/../../../gcc-13.1.1-20230519/libgcc/config/aarch64/lse-init.c:46: > undefined reference to `__getauxval' > collect2: fatal error: ld terminated with signal 11 [Segmentation > fault], core dumped > compilation terminated.
Interesting, my test build using ubuntu-22.04 and gcc-12 did not seem to fail, see [1]. Compiling with -mno-outline-atomics flag may work, not sure that is a good workaround. An alternative could be to move the payload to @ 512KB instead of @ 384KB. configs/rockpro64-rk3399_defconfig: CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000 arch/arm/dts/rk3399-rockpro64-u-boot.dtsi: u-boot,spl-payload-offset = <0x80000>; [1] https://github.com/Kwiboo/u-boot-build/actions/runs/5248398191/jobs/9479827969 Regards, Jonas > > Peter > > On Wed, May 17, 2023 at 7:41 PM Jonas Karlman <jo...@kwiboo.se> wrote: >> >> Enable CONFIG_ROCKCHIP_SPI_IMAGE to build u-boot-rockchip-spi.bin. >> Define CONFIG_SYS_SPI_U_BOOT_OFFS to write u-boot.itb at the expected >> offset. Enable CONFIG_LTO to reduce size of SPL so that the mkimage >> output fit before the 0x60000 offset in u-boot-rockchip-spi.bin. >> >> => sf probe >> SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 >> MiB >> => load mmc 1:1 10000000 u-boot-rockchip-spi.bin >> 1442304 bytes read in 27 ms (50.9 MiB/s) >> => sf update $fileaddr 0 $filesize >> device 0 offset 0x0, size 0x160200 >> 1421824 bytes written, 20480 bytes skipped in 9.501s, speed 155432 B/s >> >> Signed-off-by: Jonas Karlman <jo...@kwiboo.se> >> Reviewed-by: Kever Yang <kever.y...@rock-chips.com> >> --- >> v2: >> - Collect r-b tag >> >> configs/rockpro64-rk3399_defconfig | 3 +++ >> 1 file changed, 3 insertions(+) >> >> diff --git a/configs/rockpro64-rk3399_defconfig >> b/configs/rockpro64-rk3399_defconfig >> index 0ca2cecade25..f41c03067903 100644 >> --- a/configs/rockpro64-rk3399_defconfig >> +++ b/configs/rockpro64-rk3399_defconfig >> @@ -11,6 +11,7 @@ CONFIG_ENV_OFFSET=0x3F8000 >> CONFIG_DEFAULT_DEVICE_TREE="rk3399-rockpro64" >> CONFIG_DM_RESET=y >> CONFIG_ROCKCHIP_RK3399=y >> +CONFIG_ROCKCHIP_SPI_IMAGE=y >> CONFIG_TARGET_ROCKPRO64_RK3399=y >> CONFIG_SPL_STACK=0x400000 >> CONFIG_DEBUG_UART_BASE=0xFF1A0000 >> @@ -20,6 +21,7 @@ CONFIG_SPL_SPI=y >> CONFIG_SYS_LOAD_ADDR=0x800800 >> CONFIG_PCI=y >> CONFIG_DEBUG_UART=y >> +CONFIG_LTO=y >> CONFIG_SPL_FIT_SIGNATURE=y >> CONFIG_BOOTSTAGE=y >> CONFIG_BOOTSTAGE_REPORT=y >> @@ -37,6 +39,7 @@ CONFIG_SPL_BSS_MAX_SIZE=0x2000 >> CONFIG_SPL_STACK_R=y >> CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 >> CONFIG_SPL_SPI_LOAD=y >> +CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000 >> CONFIG_TPL=y >> CONFIG_CMD_BOOTZ=y >> CONFIG_CMD_GPT=y >> -- >> 2.40.1 >>