The UEFI capsule can be generated either through command-line
parameters, or, by specifying those in a config file. Add
documentation to describe the format of the config file.
Signed-off-by: Sughosh Ganu <sughosh.g...@linaro.org>
---
doc/develop/uefi/uefi.rst | 64 +++++++++++++++++++++++++++++++++++++++
1 file changed, 64 insertions(+)
diff --git a/doc/develop/uefi/uefi.rst b/doc/develop/uefi/uefi.rst
index f96762af39..09b32c9921 100644
--- a/doc/develop/uefi/uefi.rst
+++ b/doc/develop/uefi/uefi.rst
@@ -442,6 +442,70 @@ following command can be issued
--guid c1b629f1-ce0e-4894-82bf-f0a38387e630 \
optee.bin optee.capsule
+Or alternatively, the capsule can be generated through a make target
+
+.. code-block:: bash
+
+ $ make capsule
+
+Issuing the above make command requires specifying the capsule
+parameters through a config file instead. The Kconfig symbol
+CONFIG_EFI_CAPSULE_CFG_FILE is to be used for specifying the path to
+the config file.
+
+The config file describes the parameters that are used for generating
+one or more capsules. The parameters for a given capsule file are
+specified within curly braces, in the form of "key:value" pairs. All
+the parameters that are currently supported by the mkeficapsule tool
+can be specified through the config file.
+
+The following are some example payload parameters specified through
+the config file.
+
+.. code-block:: none
+
+ {
+ image-guid: 02f4d760-cfd5-43bd-8e2d-a42acb33c660
+ hardware-instance: 0
+ monotonic-count: 1
+ payload: u-boot.bin
+ image-index: 1
+ private-key: /path/to/priv/key
+ pub-key-cert: /path/to/pub/key
+ capsule: u-boot.capsule
+ }
+ {
+ image-guid: 4ce292da-1dd8-428d-a1c2-77743ef8b96e
+ hardware-instance: 0
+ payload: u-boot.itb
+ image-index: 2
+ oemflags: 0x8000
+ capsule: fit.capsule
+ }
+ {
+ capsule-type: accept
+ image-guid: 4ce292da-1dd8-428d-a1c2-77743ef8b96e
+ capsule: accept.capsule
+ }
+ {
+ capsule-type: revert
+ capsule: revert.capsule
+ }
+
+The following are the keys that specify the capsule parameters
+
+..code-block:: none
+
+ image-guid: Image GUID
+ image-index: Image index value
+ private-key: Path to the private key file used for capsule signing
+ pub-key-cert: Path to the public key crt file used for capsule signing
+ payload: Path to the capsule payload file
+ capsule: Path to the output capsule file that is generated
+ hardware-instance: Hardware Instance value
+ monotonic-count: Monotonic count value
+ capsule-type: Specifies capsule type. normal(default), accept or revert
+ oemflags: 16bit Oemflags value to be used(populated in capsule header)
Enabling Capsule Authentication
*******************************
--
2.34.1
