The new opt-out setting, CONFIG_ENV_MMC_PARTITION, statically sets
the MMC environment partition name. Prior to this patch, the only way
to declare this partition name was by creating a
'u-boot,mmc-env-partition' parameter in the device-tree's /config node.

This setting provides additional flexibility, particularly in cases
where accessing the device-tree is not straightforward (e.g. QEMU).

If undeclared, the device-tree's setting will be used.

Signed-off-by: Emmanuel Di Fede <emmanuel.dif...@cysec.com>
Cc: Joe Hershberger <joe.hershber...@ni.com>
Cc: Patrick Delaunay <patrick.delau...@foss.st.com>
---
 doc/device-tree-bindings/config.txt | 2 ++
 env/Kconfig                         | 8 ++++++++
 env/mmc.c                           | 9 +++++++--
 3 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/doc/device-tree-bindings/config.txt 
b/doc/device-tree-bindings/config.txt
index 3151778b2c..f50c68bbdc 100644
--- a/doc/device-tree-bindings/config.txt
+++ b/doc/device-tree-bindings/config.txt
@@ -76,6 +76,8 @@ u-boot,mmc-env-partition (int)
        precedence. In that case, only if the partition is not found,
        mmc-env-offset* will be tried.
 
+       Note that CONFIG_ENV_MMC_PARTITION overrides this device-tree setting.
+
 u-boot,no-apm-finalize (bool)
        For x86 devices running on coreboot, this tells U-Boot not to lock
        down the Intel Management Engine (ME) registers. This allows U-Boot to
diff --git a/env/Kconfig b/env/Kconfig
index 2bbe4c466a..de38b00bd1 100644
--- a/env/Kconfig
+++ b/env/Kconfig
@@ -659,6 +659,14 @@ config SYS_MMC_ENV_PART
          partition 0 or the first boot partition, which is 1 or some other 
defined
          partition.
 
+config ENV_MMC_PARTITION
+       string "mmc environment partition name"
+       depends on ENV_IS_IN_MMC
+       help
+         MMC partition name used to save environment variables.
+         If this variable is unset, u-boot will try to get the env partition 
name
+         from the DTB's /config node.
+
 config ENV_MMC_USE_DT
        bool "Read partition name and offset in DT"
        depends on ENV_IS_IN_MMC && OF_CONTROL
diff --git a/env/mmc.c b/env/mmc.c
index 7a5836ad66..887df61fbe 100644
--- a/env/mmc.c
+++ b/env/mmc.c
@@ -114,8 +114,13 @@ static inline s64 mmc_offset(struct mmc *mmc, int copy)
        if (IS_ENABLED(CONFIG_SYS_MMC_ENV_PART))
                hwpart = mmc_get_env_part(mmc);
 
-       /* look for the partition in mmc CONFIG_SYS_MMC_ENV_DEV */
-       str = ofnode_conf_read_str(dt_prop.partition);
+       if (IS_ENABLED(CONFIG_ENV_MMC_PARTITION)) {
+               str = CONFIG_ENV_MMC_PARTITION;
+       } else {
+               /* look for the partition in mmc CONFIG_SYS_MMC_ENV_DEV */
+               str = ofnode_conf_read_str(dt_prop.partition);
+       }
+
        if (str) {
                /* try to place the environment at end of the partition */
                err = mmc_offset_try_partition(str, copy, &val);
-- 
2.41.0

Reply via email to