> -----Original Message----- > From: Tanmay Upadhyay - Embedded [mailto:tanmay.upadh...@einfochips.com] > Sent: Wednesday, February 09, 2011 1:18 AM > To: Prafulla Wadaskar > Cc: Prabhanjan Sarnaik; Ashish Karkare; Julian Pidancet; u- > b...@lists.denx.de > Subject: Re: [PATCH] Kirkwood: Add support for OpenRD-Client & OpenRD- > Ultimate > > > ----- Original Message ----- > From: "Prafulla Wadaskar" <prafu...@marvell.com> > To: "Julian Pidancet" <julian.pidan...@citrix.com>, u-boot@lists.denx.de > Cc: "tanmay upadhyay" <tanmay.upadh...@einfochips.com>, "Prabhanjan > Sarnaik" <sarn...@marvell.com>, "Ashish Karkare" <akark...@marvell.com> > Sent: Wednesday, February 9, 2011 12:16:40 PM > Subject: RE: [PATCH] Kirkwood: Add support for OpenRD-Client & OpenRD- > Ultimate > > > > > -----Original Message----- > > From: Julian Pidancet [mailto:julian.pidan...@citrix.com] > > Sent: Tuesday, February 08, 2011 10:21 AM > > To: u-boot@lists.denx.de > > Cc: tanmay.upadh...@einfochips.com; Prafulla Wadaskar > > Subject: [PATCH] Kirkwood: Add support for OpenRD-Client & OpenRD- > > Ultimate > > > > This patch modifies existing OpenRD-Base support to deal with all > > the three OpenRD boards (OpenRD-Base, OpenRD-Client & OpenRD- > Ultimate). > > > > This is a rebase onto master from an original patch sent by Tanmay > > Upadhyay a few months ago. > > All credits goes to him. > > It's been tested on my OpenRD-Ultimate and works perfectly fine. > > > > Signed-off-by: Julian Pidancet <julian.pidan...@citrix.com> > > <mailto:julian.pidan...@citrix.com> > > --- > > MAKEALL | 2 + > > board/Marvell/openrd/Makefile | 56 ++++++++++ > > board/Marvell/openrd/config.mk | 33 ++++++ > > board/Marvell/openrd/kwbimage.cfg | 168 > > ++++++++++++++++++++++++++++++ > > board/Marvell/openrd/openrd.c | 173 > > +++++++++++++++++++++++++++++++ > > board/Marvell/openrd/openrd.h | 50 +++++++++ > > board/Marvell/openrd_base/Makefile | 56 ---------- > > board/Marvell/openrd_base/kwbimage.cfg | 168 ---------------------- > -- > > ------ > > board/Marvell/openrd_base/openrd_base.c | 153 ---------------------- > -- > > --- > > board/Marvell/openrd_base/openrd_base.h | 46 -------- > > boards.cfg | 4 +- > > include/configs/openrd.h | 115 ++++++++++++++++++++ > > include/configs/openrd_base.h | 92 +++-------------- > > include/configs/openrd_client.h | 50 +++++++++ > > include/configs/openrd_ultimate.h | 50 +++++++++ > > 15 files changed, 714 insertions(+), 502 deletions(-) > > create mode 100644 board/Marvell/openrd/Makefile > > create mode 100644 board/Marvell/openrd/config.mk > > create mode 100644 board/Marvell/openrd/kwbimage.cfg > > create mode 100644 board/Marvell/openrd/openrd.c > > create mode 100644 board/Marvell/openrd/openrd.h > > delete mode 100644 board/Marvell/openrd_base/Makefile > > delete mode 100644 board/Marvell/openrd_base/kwbimage.cfg > > delete mode 100644 board/Marvell/openrd_base/openrd_base.c > > delete mode 100644 board/Marvell/openrd_base/openrd_base.h > > create mode 100644 include/configs/openrd.h > > create mode 100644 include/configs/openrd_client.h > > create mode 100644 include/configs/openrd_ultimate.h > > Hi Julian > > I suggest not to delete old file, on the other hand you can rename or > move them through git. > > Regards... > Prafulla . . > > > > Hi Prafulla, > > In original patch I had moved files with 'git mv' command, but the patch > showed up like this. Am I missing appropriate git command?
Better you split your patch into two, 1. move/rename of existing code only. 2. Patch to add additional two board supports. Regards.. Prafulla . . _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot