On 4/25/23 18:52, Marek Vasut wrote: > On 4/24/23 16:21, Patrick Delaunay wrote: >> Device tree alignment with Linux kernel v6.3: >> - f5a058023239 - ARM: dts: stm32: add i2c nodes into stm32mp131.dtsi >> - 8539ebb435a5 - ARM: dts: stm32: enable i2c1 and i2c5 on >> stm32mp135f-dk.dts >> - 8539ebb435a5 - ARM: dts: stm32: add spi nodes into stm32mp131.dtsi >> - 15f72e0da4da - ARM: dts: stm32: add pinctrl and disabled spi5 node in >> stm32mp135f-dk >> - ea99a5a02ebc - ARM: dts: stm32: Create separate pinmux for qspi cs pin >> in stm32mp15-pinctrl.dtsi >> - a306d8962a24 - ARM: dts: stm32: Rename mdio0 to mdio >> - 0a5ebb1f3367 - ARM: dts: stm32: Replace SAI format with dai-format DT >> property >> - ccdab19738a6 - ARM: dts: stm32: add adc support to stm32mp13 >> - 022932ab55fd - ARM: dts: stm32: add adc pins muxing on stm32mp135f-dk >> - ab2806ddad9d - ARM: dts: stm32: add dummy vdd_adc regulator on >> stm32mp135f-dk >> - e46a180c060f - ARM: dts: stm32: add adc support on stm32mp135f-dk >> - 9ebf215fbae1 - ARM: dts: stm32: add PWR fixed regulators on stm32mp131 >> - 16f4ff60519a - ARM: dts: stm32: add USBPHYC and dual USB HS PHY support >> on stm32mp131 >> - 4a47f0f3e936 - ARM: dts: stm32: add UBSH EHCI and OHCI support on >> stm32mp131 >> - 2a46bb66c47f - ARM: dts: stm32: add USB OTG HS support on stm32mp131 >> - 9ebf215fbae1 - ARM: dts: stm32: add fixed regulators to support usb on >> stm32mp135f-dk >> - 16f4ff60519a - ARM: dts: stm32: enable USB HS phys on stm32mp135f-dk >> - c4e7254cf6dc - ARM: dts: stm32: enable USB Host EHCI on stm32mp135f-dk >> - 44978e135916 - ARM: dts: stm32: add pins for stm32g0 typec controller on >> stm32mp13 >> - 4f532403b1e5 - ARM: dts: stm32: enable USB OTG in dual role mode on >> stm32mp135f-dk >> - e1f15571c96c - ARM: dts: stm32: add mcp23017 pinctrl entry for stm32mp13 >> - 6cc71374002e - ARM: dts: stm32: add mcp23017 IO expander on I2C1 on >> stm32mp135f-dk >> - 7ffd2266bd32 - ARM: dts: stm32: Fix qspi pinctrl phandle for >> stm32mp15xx-dhcor-som >> - 21d83512bf2b - ARM: dts: stm32: Fix qspi pinctrl phandle for >> stm32mp15xx-dhcom-som >> - 732dbcf52f74 - ARM: dts: stm32: Fix qspi pinctrl phandle for >> stm32mp151a-prtt1l >> - 003b7c6b24f4 - ARM: dts: stm32: remove sai kernel clock on >> stm32mp15xx-dkx >> - f2b17b39bfff - ARM: dts: stm32: rename sound card on stm32mp15xx-dkx >> - dee3cb759d3d - ARM: dts: stm32: Remove the pins-are-numbered property >> - ae8cf3b48727 - ARM: dts: stm32: add i2s nodes on stm32mp131 >> - 619746a27bd0 - ARM: dts: stm32: add sai nodes on stm32mp131 >> - c5e05d08ef90 - ARM: dts: stm32: add spdifrx node on stm32mp131 >> - 0a5afd3ee0d0 - ARM: dts: stm32: add dfsdm node on stm32mp131 >> - bf9d876bea2e - ARM: dts: stm32: add timers support on stm32mp131 >> - a3183748371d - ARM: dts: stm32: add timer pins muxing for stm32mp135f-dk >> - a9060c1326bc - ARM: dts: stm32: add timers support on stm32mp135f-dk >> - a12154058f75 - ARM: dts: stm32: Fix User button on stm32mp135f-dk >> - 2f33df889e99 - ARM: dts: stm32: Use new media bus type macros >> - 366384e49551 - ARM: dts: stm32: Update part number NVMEM description on >> stm32mp131 > > Thanks. > > Reviewed-by: Marek Vasut <ma...@denx.de> > > You really could've just included the one Linux 6.3 commit hash and wrote > this is synced with Linux 6.3, since all the commits listed above would be > part of the Linux 6.3 commit hash anyway . It would make the commit message > shorter, but this variant is also fine. Applied to u-boot-stm/next Thanks Patrice
