On 6/19/23 12:12, Xavier Drudis Ferran wrote:
It seems the email addresses are being constantly corrupted in each
email. This time the ML address is wrong and missing an e at the end.
There is some e@ nonexistent address which I have to keep removing.
When DISTRO_DEFAULTS is not set, the default environment has
bootcmd=bootflow
That is not right, on $randomboard I picked the bootcmd is something else.
? and this will cause a UCLASS_BOOTDEV device to be
added as sibling of those UCLASS_BLK devices in boot_targets, until
boot succeeds from some device. If none succeeds, and usb is in
boot_targets, and an usb storage device is plugged to some usb port at
boot time, its UCLASS_MASS_STORAGE device will have a UCLASS_BOOTDEV
device as child, besides a UCLASS_BLK child.
If once the boot fails the user enters at the U-Boot shell prompt:
usb info
or
usb tree
The code in cmd/usb.c will eventually recurse into the UCLASS_BOOTDEV
and pass a null pointer to usb_device (because it has no parent_priv_).
This causes a reset.
Does this happen if you set empty bootcmd ('=> setenv bootcmd 'echo
hello' for example), then 'saveenv' , then 'reset' , then drop into
U-Boot shell and run 'usb reset ; usb info' too ?
[...]
