Hi,
Has anyone tried to use dwc2 and echi port together with USB disk?
look like this is not working with this combination on any Rockchip
SoC's
Here are the issues that I've reproduced in RK3328 where the disk
connected in EHCI port is detecting but DWC2 is not. Any clue?
=> usb start
starting USB...
Bus usb@ff5c0000: USB EHCI 1.00
Bus usb@ff5d0000: USB OHCI 1.0
Bus usb@ff600000: generic_phy_get_bulk : no phys property
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
Bus usb@ff580000: USB DWC2
scanning bus usb@ff5c0000 for devices... 2 USB Device(s) found
scanning bus usb@ff5d0000 for devices... 1 USB Device(s) found
scanning bus usb@ff600000 for devices... 1 USB Device(s) found
scanning bus usb@ff580000 for devices... Adding disk for
usb_mass_storage.lun0 failed
(err=-9223372036854775788/0x8000000000000014)
device 'usb_mass_storage.lun0' failed to unbind
1 USB Device(s) found
device 'usb_mass_storage.lun0' failed to unbind
scanning usb for storage devices... 2 Storage Device(s) found
=> usb tree
USB device tree:
1 Hub (480 Mb/s, 0mA)
| u-boot EHCI Host Controller
|
+-2 Mass Storage (480 Mb/s, 100mA)
Generic Teclast CoolFlash 4163831324317134
1 Hub (12 Mb/s, 0mA)
U-Boot Root Hub
1 Hub (5 Gb/s, 0mA)
U-Boot XHCI Host Controller
1 Hub (480 Mb/s, 0mA)
U-Boot Root Hub
Thanks,
Jagan.
