> From: Conor Dooley <conor.doo...@microchip.com> > Sent: Thursday, June 15, 2023 6:13 PM > To: u-boot@lists.denx.de > Cc: Rick Jian-Zhi Chen(陳建志) <r...@andestech.com>; Leo Yu-Chi Liang(梁育齊) > <ycli...@andestech.com>; Padmarao Begari <padmarao.beg...@microchip.com>; > Conor Dooley <conor.doo...@microchip.com> > Subject: [PATCH v2 2/3] riscv: dts: sync mpfs-icicle devicetree with linux > > The "notable" disappearances are: > - the pac193x stanza - there's nothing in mainline linux w.r.t. bindings > for this & what is going to appear in mainline linux is going to be > incompatible with what is currently in U-Boot. > - operating points - these operating points should not be set at the > soc.dtsi level as they may not be possible depending on the design > programmed to the FPGA > - clock output names - there are defines for the clock indices, these > should not be needed > - the dt maintainers in linux NAKed using defines for IRQ numbers > - the qspi nand, which is not part of the icicle's default configuration > is removed. > > Reviewed-by: Padmarao Begari <padmarao.beg...@microchip.com> > Tested-by: Padmarao Begari <padmarao.beg...@microchip.com> > Signed-off-by: Conor Dooley <conor.doo...@microchip.com> > --- > arch/riscv/dts/mpfs-icicle-kit-fabric.dtsi | 71 +++ > arch/riscv/dts/mpfs-icicle-kit.dts | 190 +++++--- > arch/riscv/dts/mpfs.dtsi | 442 ++++++++---------- > .../dt-bindings/clock/microchip-mpfs-clock.h | 29 +- > .../microchip-mpfs-plic.h | 196 -------- > .../interrupt-controller/riscv-hart.h | 17 -
Reviewed-by: Rick Chen <r...@andestech.com>
