Hi, On 4/14/23 06:10, Pali Rohár wrote: > Some people do not want to read review comments in emails. So put > comments and explanation into the source code itself; make emmc > partition selection code more explicit and validate configuration in > bubt command.
Sorry for too late. After applied this patch-set, some board are failed with spl's size overflowed The below is one of failed log. +arm-linux-gnueabi-ld.bfd: region `.sram' overflowed by 352 bytes +make[2]: *** [scripts/Makefile.spl:527: spl/u-boot-spl] Error 1 +make[1]: *** [Makefile:2049: spl/u-boot-spl] Error 2 Best Regards, Jaehoon Chung > > Pali Rohár (4): > mmc: spl: Make partition choice in > default_spl_mmc_emmc_boot_partition() more explicit > cmd: mvebu/bubt: Validate EXT_CSD[179] eMMC register in > mmc_burn_image() > sunxi: eMMC: Add comments explaining mapping between bootpart and > mmc_switch_part() > board: purism: Use U-Boot mmc function for converting boot part to > part access > > arch/arm/mach-sunxi/board.c | 12 ++++++++++- > board/purism/librem5/librem5.c | 6 +----- > cmd/mvebu/bubt.c | 24 +++++++++++++++++++-- > common/spl/spl_mmc.c | 38 +++++++++++++++++++++++++++------- > 4 files changed, 64 insertions(+), 16 deletions(-)