On Mon, Jul 03, 2023 at 02:30:54PM +0100, Simon Glass wrote: > Hi, > > On Mon, 3 Jul 2023 at 01:55, AKASHI Takahiro <takahiro.aka...@linaro.org> > wrote: > > > > On Thu, Jun 29, 2023 at 08:10:00PM +0100, Simon Glass wrote: > > > Hi AKASHI, > > > > > > On Wed, 28 Jun 2023 at 01:49, AKASHI Takahiro > > > <takahiro.aka...@linaro.org> wrote: > > > > > > > > This command, "scmi", provides a command line interface to various SCMI > > > > protocols. It supports at least initially SCMI base protocol with the > > > > sub > > > > command, "base", and is intended mainly for debug purpose. > > > > > > > > Signed-off-by: AKASHI Takahiro <takahiro.aka...@linaro.org> > > > > --- > > > > cmd/Kconfig | 8 ++ > > > > cmd/Makefile | 1 + > > > > cmd/scmi.c | 373 +++++++++++++++++++++++++++++++++++++++++++++++++++ > > > > 3 files changed, 382 insertions(+) > > > > create mode 100644 cmd/scmi.c > > > > > > > > diff --git a/cmd/Kconfig b/cmd/Kconfig > > > > index 02e54f1e50fe..065470a76295 100644 > > > > --- a/cmd/Kconfig > > > > +++ b/cmd/Kconfig > > > > @@ -2504,6 +2504,14 @@ config CMD_CROS_EC > > > > a number of sub-commands for performing EC tasks such as > > > > updating its flash, accessing a small saved context area > > > > and talking to the I2C bus behind the EC (if there is one). > > > > + > > > > +config CMD_SCMI > > > > + bool "Enable scmi command" > > > > + depends on SCMI_FIRMWARE > > > > + default n > > > > + help > > > > + This command provides user interfaces to several SCMI > > > > protocols, > > > > + including Base protocol. > > > > > > Please mention what is SCMI > > > > I will give a full spelling. > > > > > > endmenu > > > > > > > > menu "Filesystem commands" > > > > diff --git a/cmd/Makefile b/cmd/Makefile > > > > index 6c37521b4e2b..826e0b74b587 100644 > > > > --- a/cmd/Makefile > > > > +++ b/cmd/Makefile > > > > @@ -156,6 +156,7 @@ obj-$(CONFIG_CMD_SATA) += sata.o > > > > obj-$(CONFIG_CMD_NVME) += nvme.o > > > > obj-$(CONFIG_SANDBOX) += sb.o > > > > obj-$(CONFIG_CMD_SF) += sf.o > > > > +obj-$(CONFIG_CMD_SCMI) += scmi.o > > > > obj-$(CONFIG_CMD_SCSI) += scsi.o disk.o > > > > obj-$(CONFIG_CMD_SHA1SUM) += sha1sum.o > > > > obj-$(CONFIG_CMD_SEAMA) += seama.o > > > > diff --git a/cmd/scmi.c b/cmd/scmi.c > > > > new file mode 100644 > > > > index 000000000000..c97f77e97d95 > > > > --- /dev/null > > > > +++ b/cmd/scmi.c > > > > @@ -0,0 +1,373 @@ > > > > +// SPDX-License-Identifier: GPL-2.0+ > > > > +/* > > > > + * SCMI utility command > > > > + * > > > > + * Copyright (c) 2023 Linaro Limited > > > > + * Author: AKASHI Takahiro > > > > + */ > > > > + > > > > +#include <common.h> > > > > +#include <command.h> > > > > +#include <dm/device.h> > > > > +#include <dm/uclass.h> /* uclass_get_device */ > > > > > > Goes before linux/bitfield.h > > > > Can you tell me why? > > It is just a convention: > https://u-boot.readthedocs.io/en/latest/develop/codingstyle.html#include-files
Okay. > > > > > > +#include <exports.h> > > > > +#include <scmi_agent.h> > > > > +#include <scmi_agent-uclass.h> > > > > +#include <asm/types.h> > > > > +#include <linux/bitfield.h> > > > > +#include <linux/bitops.h> > > > > + > > > > +static struct udevice *agent; > > > > +static struct udevice *base_proto; > > > > +static const struct scmi_base_ops *ops; > > > > + > > > > +struct { > > > > + enum scmi_std_protocol id; > > > > + const char *name; > > > > +} protocol_name[] = { > > > > + {SCMI_PROTOCOL_ID_BASE, "Base"}, > > > > + {SCMI_PROTOCOL_ID_POWER_DOMAIN, "Power domain management"}, > > > > + {SCMI_PROTOCOL_ID_SYSTEM, "System power management"}, > > > > + {SCMI_PROTOCOL_ID_PERF, "Performance domain management"}, > > > > + {SCMI_PROTOCOL_ID_CLOCK, "Clock management"}, > > > > + {SCMI_PROTOCOL_ID_SENSOR, "Sensor management"}, > > > > + {SCMI_PROTOCOL_ID_RESET_DOMAIN, "Reset domain management"}, > > > > + {SCMI_PROTOCOL_ID_VOLTAGE_DOMAIN, "Voltage domain management"}, > > > > +}; > > > > + > > > > +/** > > > > + * scmi_convert_id_to_string() - get the name of SCMI protocol > > > > + * > > > > + * @id: Protocol ID > > > > + * > > > > + * Get the printable name of the protocol, @id > > > > + * > > > > + * Return: Name string on success, NULL on failure > > > > + */ > > > > +static const char *scmi_convert_id_to_string(enum scmi_std_protocol id) > > > > > > scmi_lookup_id? > > > > Not sure your intention. > > The name above gives us exactly what this function does for pretty printing > > instead of a number. > > I think that 'lookup' implies we try to determine if the id exists or not. > > I am just trying to avoid the code turning into Java :-) Java? > How about scmi_get_name() ? Well, more specifically scmi_get_protocol_name()? -Takahiro Akashi > Regards, > Simon