The MAIN CPSW0 instance of CPSW Ethernet Switch on TI's J7200 SoC supports SGMII mode. To enable support for utilizing the SGMII daughtercard with TI's DP83869 PHY, enable the corresponding config.
Also, since the SGMII daughtercard is connected to the I2C GPIO Expander 2 connector on the J7200 EVM, powering on the Ethernet PHY and resetting it requires GPIO Hogging capability. Enable it as well. Signed-off-by: Siddharth Vadapalli <s-vadapa...@ti.com> --- configs/j7200_evm_a72_defconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/configs/j7200_evm_a72_defconfig b/configs/j7200_evm_a72_defconfig index e40900fffa..e5b5c85ed1 100644 --- a/configs/j7200_evm_a72_defconfig +++ b/configs/j7200_evm_a72_defconfig @@ -122,6 +122,7 @@ CONFIG_FASTBOOT_FLASH=y CONFIG_FASTBOOT_FLASH_MMC_DEV=0 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_TI_SCI_PROTOCOL=y +CONFIG_GPIO_HOG=y CONFIG_DA8XX_GPIO=y CONFIG_DM_PCA953X=y CONFIG_DM_I2C=y @@ -154,6 +155,7 @@ CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_MTD=y CONFIG_MULTIPLEXER=y CONFIG_MUX_MMIO=y +CONFIG_PHY_TI_DP83869=y CONFIG_PHY_FIXED=y CONFIG_TI_AM65_CPSW_NUSS=y CONFIG_PHY=y -- 2.34.1
