From: Fabio Estevam <feste...@denx.de>
The conversion to CONFIG_DM_SERIAL is mandatory, so select this option.
Signed-off-by: Fabio Estevam <feste...@denx.de>
---
arch/arm/Kconfig | 1 -
arch/arm/mach-imx/mxs/Kconfig | 1 +
configs/mx23_olinuxino_defconfig | 1 +
3 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ac079da7527a..b3115b054c8c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -912,7 +912,6 @@ config ARCH_MX23
select CPU_ARM926EJS
select GPIO_EXTRA_HEADER
select MACH_IMX
- select PL011_SERIAL if !TARGET_MX23EVK
select SUPPORT_SPL
config ARCH_MX28
diff --git a/arch/arm/mach-imx/mxs/Kconfig b/arch/arm/mach-imx/mxs/Kconfig
index 6b9d5c956971..d3233d8d14f3 100644
--- a/arch/arm/mach-imx/mxs/Kconfig
+++ b/arch/arm/mach-imx/mxs/Kconfig
@@ -10,6 +10,7 @@ choice
config TARGET_MX23_OLINUXINO
bool "Support mx23_olinuxino"
+ select PL01X_SERIAL
select BOARD_EARLY_INIT_F
config TARGET_MX23EVK
diff --git a/configs/mx23_olinuxino_defconfig b/configs/mx23_olinuxino_defconfig
index 89b69fb32366..24968e18710f 100644
--- a/configs/mx23_olinuxino_defconfig
+++ b/configs/mx23_olinuxino_defconfig
@@ -50,6 +50,7 @@ CONFIG_LED_STATUS_BOOT=0
CONFIG_LED_STATUS_CMD=y
CONFIG_MMC_MXS=y
CONFIG_CONS_INDEX=0
+CONFIG_DM_SERIAL=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_HOST_ETHER=y
--
2.34.1
