On Sun, Feb 13, 2011 at 9:30 PM, Madhavi Manchala <madhavi.li...@gmail.com> wrote: > On Fri, Feb 11, 2011 at 10:27 PM, Wolfgang Denk <w...@denx.de> wrote: >> Dear Lei Wen, >> >> In message <aanlktin7zsxvqjkp1htovf44mtfknsjr2df9bsbkt...@mail.gmail.com> >> you wrote: >>> >>> If your sdram is large enough, or the uboot code is small enough, you don't >>> need >>> the dram init. But begin at the TEXT_BASE still is a must. >> >> Hugh? You _always_ must make sure the RAM has been initialized first. >> >> Best regards, >> >> Wolfgang Denk > > Dear Wolfgang Denk and Lei, > > Thanks for your information. > > I build one u-boot.bin file for smdk2410 configuration. However, when > I try to load through JTAG, I am seeing the following error. > > invalid download offset u-boot.bin > > Am I doing any thing wrong? I set RAM BASE address as 0x00000000 in > the confiuration file as our board RAM starts from there only. Shall I > need to modify any thing in the config file? > No idea... That info message should not be printed by your uboot. Maybe you should refer to someone expert for your jtag to solve this...
Best regads, Lei _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot