On 09:40-20230715, Marcel Ziswiler wrote: > From: Marcel Ziswiler <marcel.ziswi...@toradex.com> > > This adds initial support for the Toradex Verdin AM62 Quad 1GB WB IT > V1.0A module. They are strapped to boot from their on-module eMMC. > U-Boot supports booting from the on-module eMMC only, DFU support is > disabled for now due to missing AM62x USB support. > > Boot sequence is: > SYSFW ---> R5 SPL (both in tiboot3.bin) ---> ATF (TF-A) ---> OP-TEE > ---> A53 SPL (part of tispl.bin) ---> U-boot proper (u-boot.img) > > Signed-off-by: Marcel Ziswiler <marcel.ziswi...@toradex.com> > > --- > > Changes in v3: > - Integrate our recent find of CTRL_SLEEP_MOCI# needing to be driven > from A53 SPL as it may be used to control some power-rails on the > carrier board. E.g. on the Yavia carrier board it is needed to power > the I2C EEPROM on the carrier board. > - Improve boot environment in R5 SPL vs. A53. > - Integrate launch configuration SKUs to Wi-Fi handling. > - Re-sync device trees from Linux kernel v6.5-rc1. > - Add warning if memory is less than expected.
Thank you. we are in the middle of a bunch of cleanup for AM62 at the moment - fixing up mdio, dts, ethernet etc and introducing binman at the moment. I think it might be better to introduce new platforms with those changes incorporated. -- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D