At present this feature is enabled in SPL if a bloblist is available.
Some platforms may not want to use this, so add an option to allow the
feature to be disabled.
Note that the feature unfortunately only fills in part of the
video-handoff information, so causes failures on x86 platforms. For now,
disable it there.
Signed-off-by: Simon Glass <s...@chromium.org>
---
common/board_f.c | 3 +--
drivers/video/Kconfig | 10 ++++++++++
drivers/video/video-uclass.c | 2 +-
3 files changed, 12 insertions(+), 3 deletions(-)
diff --git a/common/board_f.c b/common/board_f.c
index 5c8646b22283..656bd716c7ec 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -411,8 +411,7 @@ __weak int arch_reserve_mmu(void)
static int reserve_video(void)
{
- if (IS_ENABLED(CONFIG_SPL_VIDEO) && spl_phase() > PHASE_SPL &&
- CONFIG_IS_ENABLED(BLOBLIST)) {
+ if (IS_ENABLED(CONFIG_SPL_VIDEO_HANDOFF) && spl_phase() > PHASE_SPL) {
struct video_handoff *ho;
ho = bloblist_find(BLOBLISTT_U_BOOT_VIDEO, sizeof(*ho));
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index b41dc60cec59..0c9c14b021fe 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1011,6 +1011,16 @@ config SPL_VIDEO
if SPL_VIDEO
source "drivers/video/tidss/Kconfig"
+config SPL_VIDEO_HANDOFF
+ bool "Pass the video frame-buffer through to U-Boot proper"
+ depends on SPL_BLOBLIST
+ default y if !X86
+ help
+ Enable this to set up video-handoff information in SPL which can be
+ picked up in U-Boot proper. This includes the frame buffer and
+ various other pieces of information. With this enabled, SPL can set
+ up video and avoid re-initing it later.
+
config SPL_VIDEO_LOGO
bool "Show the U-Boot logo on the display at SPL"
default y if !SPL_SPLASH_SCREEN
diff --git a/drivers/video/video-uclass.c b/drivers/video/video-uclass.c
index 949595f1bc69..86262a3435c2 100644
--- a/drivers/video/video-uclass.c
+++ b/drivers/video/video-uclass.c
@@ -141,7 +141,7 @@ int video_reserve(ulong *addrp)
debug("Video frame buffers from %lx to %lx\n", gd->video_bottom,
gd->video_top);
- if (spl_phase() == PHASE_SPL && CONFIG_IS_ENABLED(BLOBLIST)) {
+ if (spl_phase() == PHASE_SPL && CONFIG_IS_ENABLED(VIDEO_HANDOFF)) {
struct video_handoff *ho;
ho = bloblist_add(BLOBLISTT_U_BOOT_VIDEO, sizeof(*ho), 0);
--
2.41.0.487.g6d72f3e995-goog
