The i.MX93 11x11 EVK fails to boot with following error: Model: NXP i.MX93 11X11 EVK board DRAM: 2 GiB Error binding driver 'imx93-adc': -96 Some drivers failed to bind Error binding driver 'simple_bus': -96 Some drivers failed to bind Error binding driver 'simple_bus': -96 Some drivers failed to bind initcall sequence 00000000fffb8f28 failed at call 000000008021e0d4 (err=-96) ### ERROR ### Please RESET the board ###
That's because since commit e7ff54d96303 ("imx93_evk: defconfig: add adc support") CONFIG_ADC_IMX93 is enabled but CONFIG_ADC is not. Fix this by making CONFIG_ADC_IMX93 depend on CONFIG_ADC. Signed-off-by: Sébastien Szymanski <sebastien.szyman...@armadeus.com> --- drivers/adc/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/adc/Kconfig b/drivers/adc/Kconfig index 4336732dee56..a01d73846b74 100644 --- a/drivers/adc/Kconfig +++ b/drivers/adc/Kconfig @@ -66,6 +66,7 @@ config STM32_ADC config ADC_IMX93 bool "Enable NXP IMX93 ADC driver" + depends on ADC help This enables basic driver for NXP IMX93 ADC. It provides: -- 2.41.0