Yes, please see my post. Sorry for the delay. I have trouble building the u-boot-usb master branch. Are all boards supposed to build correct in that branch? - Simon
On Fri, Feb 11, 2011 at 12:33 PM, Remy Bohmer <li...@bohmer.net> wrote: > Hi, > > 2011/2/8 Simon Glass <s...@chromium.org>: >> This adds support for using USB Ethernet dongles in host mode. This is just >> the framework - drivers will come later. A new config option called >> CONFIG_USB_HOST_ETHER can be defined in board config files to switch this >> on. >> >> The was originally written by NVIDIA and was cleaned up for release by the >> Chromium authors. >> >> Signed-off-by: Simon Glass <s...@chromium.org> >> --- >> Makefile | 1 + >> common/cmd_usb.c | 12 +++- >> common/usb.c | 6 ++- >> doc/README.usb | 4 +- >> drivers/usb/eth/Makefile | 45 ++++++++++++++ >> drivers/usb/eth/usb_ether.c | 143 >> +++++++++++++++++++++++++++++++++++++++++++ >> include/usb.h | 9 +++- >> include/usb_ether.h | 61 ++++++++++++++++++ >> net/eth.c | 47 +++++++-------- >> 9 files changed, 298 insertions(+), 30 deletions(-) >> create mode 100644 drivers/usb/eth/Makefile >> create mode 100644 drivers/usb/eth/usb_ether.c >> create mode 100644 include/usb_ether.h > > This patch does not seem to apply to u-boot-usb master branch... > Can you please take a look at it? > > Kind regards, > > Remy > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot