On 2023/6/22 00:02, Quentin Schulz wrote:
From: Quentin Schulz <quentin.sch...@theobroma-systems.com> Puma supports upstream TF-A and is configured to output serial on UART0 instead of the default UART2. Since U-Boot is properly configured to output on UART0, let's pass the DT to TF-A so there is no need for a custom TF-A to make the latter output to UART0 too. Cc: Quentin Schulz <foss+ub...@0leil.net> Signed-off-by: Quentin Schulz <quentin.sch...@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.y...@rock-chips.com> Thanks, - Kever
--- configs/puma-rk3399_defconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig index 697f5eccef5..b632fa3dcf3 100644 --- a/configs/puma-rk3399_defconfig +++ b/configs/puma-rk3399_defconfig @@ -39,7 +39,6 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200 CONFIG_SPL_I2C=y CONFIG_SPL_POWER=y CONFIG_SPL_SPI_LOAD=y -CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y CONFIG_TPL=y CONFIG_CMD_BOOTZ=y CONFIG_CMD_GPT=y
