Also,
On 27/07/23 13:30, Nishanth Menon wrote:
Convert the image format into svg that can be reused across platforms as
needed.
Signed-off-by: Nishanth Menon <n...@ti.com>
---
doc/board/ti/img/dm_tispl.bin.svg | 317 ++++++++++++++++
doc/board/ti/img/j7200_tiboot3.bin.svg | 487 +++++++++++++++++++++++++
doc/board/ti/j7200_evm.rst | 63 +---
[...]
+++ b/doc/board/ti/j7200_evm.rst
@@ -122,71 +122,14 @@ Copy the below images to an SD card and boot:
Image formats:
--------------
-- tiboot3.bin:
+- tiboot3.bin
-.. code-block:: console
-
- +-----------------------+
- | X.509 |
- | Certificate |
- | +-------------------+ |
- | | | |
- | | R5 | |
- | | u-boot-spl.bin | |
- | | | |
- | +-------------------+ |
- | | | |
- | | FIT header | |
- | | +---------------+ | |
- | | | | | |
- | | | DTB 1...N | | |
- | | +---------------+ | |
- | +-------------------+ |
- | | | |
- | | FIT HEADER | |
- | | +---------------+ | |
- | | | | | |
- | | | sysfw.bin | | |
- | | +---------------+ | |
- | | | | | |
- | | | board config | | |
- | | +---------------+ | |
- | | | | | |
- | | | PM config | | |
- | | +---------------+ | |
- | | | | | |
- | | | RM config | | |
- | | +---------------+ | |
- | | | | | |
- | | | Secure config | | |
- | | +---------------+ | |
- | +-------------------+ |
- +-----------------------+
Again, correct me if I am wrong; but sysfw+board-cfgs are not within a FIT
header in this case. They're more like clubbed together with magic headers of
their own, not a FIT header. However if intention is just to show board configs
are present here and not in detail, removing the FIT Header part will be sufficient.
--
Thanking You
Neha Malcom Francis