Hi Simon, 2011/2/18 Simon Glass <s...@chromium.org>: > +UBML > > Hi Anders, > > You will need at least: > > /* Enable USB Ethernet dongles */ > #define CONFIG_USB_HOST_ETHER > #define CONFIG_USB_ETHER_ASIX > > (and your platform must support USB with CONFIG_CMD_USB and CONFIG_USB_EHCI > for example) > > You will also want to enable the network commands: > > #define CONFIG_CMD_NET > #define CONFIG_NET_MULTI > #define CONFIG_CMD_PING > #define CONFIG_CMD_DHCP > > and some bootp options: > > #define CONFIG_BOOTP_SUBNETMASK > #define CONFIG_BOOTP_GATEWAY > #define CONFIG_BOOTP_HOSTNAME > #define CONFIG_BOOTP_BOOTPATH > > #define CONFIG_IPADDR 10.0.0.2 > #define CONFIG_SERVERIP 10.0.0.1 > #define CONFIG_BOOTFILE uImage > > > I might have missed something, but that should be enough to make progress. > > 'usb start' should identify the Ethernet dongle. Then 'bootp' should use it > to obtain an IP address from DHCP.
Apparently it is not clear to others how it should be used. Can you please add a description to doc/README.usb and provide a patch for that? Kind regards, Remy _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot