On 8/4/23 09:00, Miquel Raynal wrote:
Hi Marek,
ma...@denx.de wrote on Wed, 2 Aug 2023 14:46:54 +0200:
Extend the driver core to perform lookup by both OF node and driver
bound to the node. Use this to look up specific device instances to
unbind from nodes in the unbind command. One example where this is
needed is USB peripheral controller, which may have multiple gadget
drivers bound to it. The unbind command has to select that specific
gadget driver instance to unbind from the controller, not unbind the
controller driver itself from the controller.
USB ethernet gadget usage looks as follows with this change. Notice
the extra 'usb_ether' addition in the 'unbind' command at the end.
"
bind /soc/usb-otg@49000000 usb_ether
setenv ethact usb_ether
setenv loadaddr 0xc2000000
setenv ipaddr 10.0.0.2
setenv serverip 10.0.0.1
setenv netmask 255.255.255.0
tftpboot 0xc2000000 10.0.0.1:test.file
unbind /soc/usb-otg@49000000 usb_ether
This extra parameter does not seem to work on the BBBW. I cannot select
the "usb_ether" driver like you do.
Good news though, I am now able to use fastboot, but it is not
straightforward:
Here is my sequence right after the boot (reducing the dm tree output
to the usb nodes for clarity):
=> dm tree
misc 0 [ + ] ti-musb-wrapper | |-- usb@47400000
usb 0 [ + ] ti-musb-peripheral | | |-- usb@47401000
ethernet 1 [ + ] usb_ether | | | `-- usb_ether
bootdev 3 [ ] eth_bootdev | | | `--
usb_ether.bootdev
usb 0 [ ] ti-musb-host | | `-- usb@47401800
=> fastboot usb 0
couldn't find an available UDC
g_dnl_register: failed!, error: -19
That is expected and not a bug, since the beagle explicitly binds USB
ethernet to MUSB gadget in board file, which is legacy deprecated way.
exit not allowed from main input shell.
=> unbind /ocp/usb@47400000/usb@47401000 usb_ether
Does
=> unbind ethernet 0
work ?
If so, 1/4 in this series can be skipped altogether.
You likely won't even need the rebinding of ti-musb-peripheral anymore.
Cannot find a device with path /ocp/usb@47400000/usb@47401000
=> unbind /ocp/usb@47400000/usb@47401000
=> dm tree
misc 0 [ + ] ti-musb-wrapper | |-- usb@47400000
usb 0 [ ] ti-musb-host | | `-- usb@47401800
=> fastboot usb 0
=> bind /ocp/usb@47400000/usb@47401000 ti-musb-peripheral
=> dm tree
misc 0 [ + ] ti-musb-wrapper | |-- usb@47400000
usb 0 [ ] ti-musb-host | | |-- usb@47401800
usb 0 [ ] ti-musb-peripheral | | `-- usb@47401000
=> fastboot usb 0
musb-hdrc: peripheral reset irq lost!
# works! (the irq-related line above as always been there)
So now, how do we make this process easy/understandable?
What would be your proposal ?
