Default configuration matches values which are set in the board
so this configuration is not required.
Signed-off-by: Svyatoslav Ryhel <clamo...@gmail.com>
---
board/asus/transformer-t30/transformer-t30.c | 25 --------------------
1 file changed, 25 deletions(-)
diff --git a/board/asus/transformer-t30/transformer-t30.c
b/board/asus/transformer-t30/transformer-t30.c
index b6fd19d28e..5c1bac004f 100644
--- a/board/asus/transformer-t30/transformer-t30.c
+++ b/board/asus/transformer-t30/transformer-t30.c
@@ -33,11 +33,6 @@
#define TPS65911_LDO5 0x32
#define TPS65911_LDO6 0x35
-#define TPS65911_GPIO0 0x60
-#define TPS65911_GPIO6 0x66
-#define TPS65911_GPIO7 0x67
-#define TPS65911_GPIO8 0x68
-
#define TPS65911_DEVCTRL 0x3F
#define DEVCTRL_PWR_OFF_MASK BIT(7)
#define DEVCTRL_DEV_ON_MASK BIT(2)
@@ -146,26 +141,6 @@ static void tps65911_voltage_init(void)
if (ret)
log_debug("vddio_usd set failed: %d\n", ret);
}
-
- /* TPS659110: GPIO0_REG output high to VDD_5V0_SBY */
- ret = dm_i2c_reg_write(dev, TPS65911_GPIO0, 0x07);
- if (ret)
- log_debug("vdd_5v0_sby set failed: %d\n", ret);
-
- /* TPS659110: GPIO6_REG output high to VDD_3V3_SYS */
- ret = dm_i2c_reg_write(dev, TPS65911_GPIO6, 0x07);
- if (ret)
- log_debug("vdd_3v3_sys set failed: %d\n", ret);
-
- /* TPS659110: GPIO7_REG output high to VDD_1V5_DDR */
- ret = dm_i2c_reg_write(dev, TPS65911_GPIO7, 0x07);
- if (ret)
- log_debug("vdd_1v5_ddr set failed: %d\n", ret);
-
- /* TPS659110: GPIO8_REG pull_down output high to VDD_5V0_SYS */
- ret = dm_i2c_reg_write(dev, TPS65911_GPIO8, 0x0f);
- if (ret)
- log_debug("vdd_5v0_sys set failed: %d\n", ret);
}
/*
--
2.39.2
