On mer., août 23, 2023 at 22:10, Nishanth Menon <n...@ti.com> wrote:
> Add support for BeaglePlay - rev 5 > > Full series: > https://github.com/nmenon/fix-k3-dt-u-boot/commits/beagleplay-v4.2 > > Caveats: > * networking: pending > https://lore.kernel.org/all/20230822121350.51324-1-rog...@kernel.org/ > * 32kclk and usb: pending: > https://lore.kernel.org/u-boot/20230725185253.2123433-4...@ti.com/ > OR > https://github.com/nmenon/fix-k3-dt-u-boot/commit/853b29d63c1ca642be316f1afb0fb778610dec46 > being properly resolved (NOTE: without this patch, wlan is broken in > Linux as the 32kclk from SoC is incorrectly supplied to wlan as 25MHz) > * There seems to be a bug in Linux kernel with sdhci that seems to > depend on u-boot initialization of sdhci for functionality. > > CI loop check: https://github.com/u-boot/u-boot/pull/425 (whenever that > gets done I guess). > > Bootlogs: > SD Boot: https://gist.github.com/nmenon/c74acb3a895053e05623e886df77c8fe > eMMC, no SD boot: > https://gist.github.com/nmenon/16df3b8fc0e9102f29ebb7836b950a08 > eMMC with SD card: > https://gist.github.com/nmenon/042dbe7c08589e7bfe1919da1fedc545 > > Complete code (with the tmp patch) can be found at: > https://github.com/nmenon/fix-k3-dt-u-boot/tree/beagleplay-v5 > > Baseline: 97841de68043 (origin/next) Merge branch > '2023-08-22-assorted-code-cleanups' into next > > Changes since V4: > * Switched boot from distro_boot to bootstd - AM62 as a start will rely > on txt env file. > * Cleanups around am625_init.c (new patches) > * Review comment fixups for documentation > * I have'nt picked up Mattijs's tested by since this is a different > approach (bootstd Vs distro_bootcmd) > * Dropped the sdhci patches AND CFG_EXTRA_ENV_SETTINGS (Instead, we > switch entirely to bootstd and move am62x-sk to bootstd along with > it). > > V4: https://lore.kernel.org/all/20230822184135.2328409-1...@ti.com/ > V3: https://lore.kernel.org/all/20230815164440.2713726-1...@ti.com/ > V2: https://lore.kernel.org/u-boot/20230727234446.3651836-1...@ti.com/ > V1: https://lore.kernel.org/all/20230725185253.2123433-1...@ti.com/ > > Nishanth Menon (16): > include: configs: ti_armv7_common: Add documentation for protected > section > include: configs: am62x_evm: Drop unused SDRAM address > include: configs: am62x_evm: Wrap distroboot with > CONFIG_DISTRO_DEFAULTS > board: ti: am62x: am62x.env: Add explicit boot_targets > configs: am62x_evm_a53_defconfig: Switch to bootstd > include: configs: am62x_evm: Drop distro_bootcmd usage > include: env: ti: ti_armv7_common.env: Rename to ti_common.env > include: env: ti: ti_common: Add a generic findfdt > board: ti: am62x: am62x.env: Use default findfdt > arm: mach-k3: am625_init: Use IS_ENABLED() > arm: mach-k3: am625_init: Convert rtc_erratumi2327_init to static > configs: am62x_evm*: Enable EMMC_BOOT configuration > arm: mach-k3: am625: Add support for UDA FS > arm: dts: k3-am625-sk-binman: Add labels for unsigned binary > board: ti: am62x: Add am62x_beagleplay_* defconfigs and env file > doc: board: ti: Add BeaglePlay documentation > > Robert Nelson (1): > arm: dts: Add k3-am625-beagleplay I re-tested v5. Using baseline 97841de68043 ("Merge branch '2023-08-22-assorted-code-cleanups' into next") I could boot all the way to U-boot proper shell. And the LEDs work for me as well with: => led led-0 toggle So for the whole series: Tested-by: Mattijs Korpershoek <mkorpersh...@baylibre.com> Note that I did not tried any boot related commands since I mostly work on Android booting and I have not rebased my wip-branch yet. > > arch/arm/dts/Makefile | 2 + > .../dts/k3-am625-beagleplay-ddr4-1600MTs.dtsi | 2195 +++++++++++++++++ > arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi | 195 ++ > arch/arm/dts/k3-am625-beagleplay.dts | 758 ++++++ > arch/arm/dts/k3-am625-r5-beagleplay.dts | 86 + > arch/arm/dts/k3-am625-sk-binman.dtsi | 4 +- > arch/arm/mach-k3/am625_init.c | 49 +- > board/siemens/iot2050/iot2050.env | 2 +- > board/ti/am62ax/am62ax.env | 2 +- > board/ti/am62x/MAINTAINERS | 7 + > board/ti/am62x/am62x.env | 7 +- > board/ti/am62x/beagleplay.env | 18 + > board/ti/am62x/beagleplay_a53.config | 55 + > board/ti/am62x/beagleplay_r5.config | 15 + > board/ti/am64x/am64x.env | 2 +- > board/ti/am65x/am65x.env | 2 +- > board/ti/j721e/j721e.env | 2 +- > board/ti/j721s2/j721s2.env | 2 +- > board/ti/ks2_evm/k2e_evm.env | 2 +- > board/ti/ks2_evm/k2g_evm.env | 2 +- > board/ti/ks2_evm/k2hk_evm.env | 2 +- > board/ti/ks2_evm/k2l_evm.env | 2 +- > configs/am62x_evm_a53_defconfig | 6 +- > configs/am62x_evm_r5_defconfig | 1 + > doc/board/ti/am62x_beagleplay.rst | 256 ++ > doc/board/ti/img/beagleplay_emmc.svg | 697 ++++++ > doc/board/ti/k3.rst | 1 + > include/configs/am62x_evm.h | 6 - > include/configs/ti_armv7_common.h | 2 +- > .../ti/{ti_armv7_common.env => ti_common.env} | 12 + > 30 files changed, 4342 insertions(+), 50 deletions(-) > create mode 100644 arch/arm/dts/k3-am625-beagleplay-ddr4-1600MTs.dtsi > create mode 100644 arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi > create mode 100644 arch/arm/dts/k3-am625-beagleplay.dts > create mode 100644 arch/arm/dts/k3-am625-r5-beagleplay.dts > create mode 100644 board/ti/am62x/beagleplay.env > create mode 100644 board/ti/am62x/beagleplay_a53.config > create mode 100644 board/ti/am62x/beagleplay_r5.config > create mode 100644 doc/board/ti/am62x_beagleplay.rst > create mode 100644 doc/board/ti/img/beagleplay_emmc.svg > rename include/env/ti/{ti_armv7_common.env => ti_common.env} (71%) > > -- > 2.40.0