On Tue, 29 Aug 2023 at 21:18, Simon Glass <s...@chromium.org> wrote: > > Hi Ard, > > On Thu, 24 Aug 2023 at 03:10, Ard Biesheuvel <a...@kernel.org> wrote: > > > > On Wed, 23 Aug 2023 at 22:04, Simon Glass <s...@chromium.org> wrote: > > > > > > Hi, > > > > > > On Wed, 23 Aug 2023 at 08:24, Ard Biesheuvel <a...@kernel.org> wrote: > > > > > > > > On Wed, 23 Aug 2023 at 10:59, Mark Rutland <mark.rutl...@arm.com> wrote: > > > > > > > > > > On Tue, Aug 22, 2023 at 02:34:42PM -0600, Simon Glass wrote: > > > > > > The Devicetree specification skips over handling of a logical view > > > > > > of > > > > > > the memory map, pointing users to the UEFI specification. > > > > > > > > > > > > It is common to split firmware into 'Platform Init', which does the > > > > > > initial hardware setup and a "Payload" which selects the OS to be > > > > > > booted. > > > > > > Thus an handover interface is required between these two pieces. > > > > > > > > > > > > Where UEFI boot-time services are not available, but UEFI firmware > > > > > > is > > > > > > present on either side of this interface, information about memory > > > > > > usage > > > > > > and attributes must be presented to the "Payload" in some form. > > > > > > > > Not quite. > > > > > > > > This seems to be intended for consumption by Linux booting in ACPI > > > > mode, but not via UEFI, right? > > > > > > Actually, this is for consumption by firmware. The goal is to allow > > > edk2 to boot into U-Boot and vice versa, i.e. provide some > > > interoperability between firmware projects. I will use the "Platform > > > Init" and "Payload" terminology here too. > > > > > > > OK. It was the cc to linux-acpi@ and the authors of the > > ACPI/SMBIOS-without-UEFI patches that threw me off here. > > > > If we are talking about an internal interface for firmware components, > > I'd be inclined to treat this as an implementation detail, as long as > > the OS is not expected to consume these DT nodes. > > > > However, I struggle to see the point of framing this information as a > > 'UEFI memory map'. Neither EDK2 nor u-boot consume this information > > natively, and there is already prior art in both projects to consume > > nodes following the existing bindings for device_type=memory and the > > /reserved-memory node. UEFI runtime memory is generally useless > > without UEFI runtime services, and UEFI boot services memory is just > > free memory. > > > > There is also an overlap with the handover between secure and > > non-secure firmware on arm64, which is also DT based, and communicates > > available memory as well as RAM regions that are reserved for firmware > > use. > > > > In summary, I don't see why a non-UEFI payload would care about UEFI > > semantics for pre-existing memory reservations, or vice versa. Note > > that EDK2 will manage its own memory map, and expose it via UEFI boot > > services and not via DT. > > Bear in mind that one or both sides of this interface may be UEFI. > There is no boot-services link between the two parts that I have > outlined. >
I don't understand what this means. UEFI specifies how one component invokes another, and it is not based on a DT binding. If the second component calls UEFI boot or runtime services, it should be invoked in this manner. If it doesn't, then it doesn't care about these memory reservations (and the OS will not be booted via UEFI either) So I feel I am missing something here. Perhaps a practical example would be helpful? > > > > ... > > > > > > There is no intent to implement the UEFI spec, here. It is simply that > > > some payloads (EDK2) are used to having this information. > > > > > > Imagine splitting EDK2 into two parts, one of which does platform init > > > and the other which (the payload) boots the OS. The payload wants > > > information from Platform Init and it needs to be in a devicetree, > > > since that is what we have chosen for this interface. So to some > > > extent this is unrelated to whether you have EFI boot services. We > > > just need to be able to pass the information across the interface. > > > Note that the user can (without recompilation, etc.) replace the > > > second part with U-Boot (for example) and it must still work. > > > > > > > OK, so device tree makes sense for this. This is how I implemented the > > EDK2 port that targets QEMU/mach-virt - it consumes the DT to discover > > the UART, RTC,, memory, PCI host bridge, etc. > > > > But I don't see a use case for a UEFI memory map here. > > > > ... > > > > > > Here I believe you are talking about booting the kernel in EFI mode, > > > but that is not the intent of this patch. This is all about things > > > happening in firmware. Now, if the payload (second) part of the > > > firmware decides it wants to offer EFI boot services and boot the > > > kernel via the EFI stub, then it may very well pack this information > > > (with a few changes) into a system table and make it available to the > > > kernel stub. But by then this FDT binding is irrelevant, since it has > > > served its purpose (which, to reiterate, is to facilitate information > > > passage from platform init to 'payload'). > > > > > > > Indeed. As long as this binding is never consumed by the OS, I don't > > have any objections to it - I just fail to see the point. > > OK thanks. > > The point is that Platform Init and the payload need to agree about > where certain things are in memory. It is true that this is coming > from an EFI context, but that is just an example. Platform Init > doesn't necessarily know whether its payload is EFI, but may set this > up for use by the payload, just in case. > Platform init can communicate memory reservations to a UEFI payload if needed, and there is prior art for this. Platform init *cannot* communicate UEFI specific boot or runtime reservations in this manner, as this doesn't make sense: either Platform Init is UEFI and invokes a UEFI payload, in which case the UEFI spec applies. In other cases, the UEFI memory regions either don't exist or are irrelevant. The only EFI-agnostic aspect here is RAM reservation for use by firmware in general, and this does not have these UEFI semantics and does not need to be framed as such.
