Use proper project name in README, rst and comment.
Done in connection to commit bb922ca3eb4b ("global: Use proper project name
U-Boot (next)").
Signed-off-by: Michal Simek <michal.si...@amd.com>
---
board/cobra5272/README | 18 +++++++++---------
board/emulation/qemu-ppce500/qemu-ppce500.c | 2 +-
doc/board/xilinx/zynq.rst | 2 +-
doc/board/xilinx/zynqmp-r5.rst | 4 ++--
doc/imx/mkimage/imximage.txt | 2 +-
doc/usage/environment.rst | 2 +-
doc/usage/semihosting.rst | 2 +-
tools/binman/entries.rst | 2 +-
8 files changed, 17 insertions(+), 17 deletions(-)
diff --git a/board/cobra5272/README b/board/cobra5272/README
index 11abcfacdb6e..0b07148b73a3 100644
--- a/board/cobra5272/README
+++ b/board/cobra5272/README
@@ -1,6 +1,6 @@
File: README.COBRA5272
Author: Florian Schlote for Sentec elektronik
(li...@sentec-elektronik.de)
-Contents: This is the README of u-boot (Universal bootloader) for our
+Contents: This is the README of U-Boot (Universal bootloader) for our
COBRA5272 board.
Version: v01.00
Date: Tue Mar 30 00:28:33 CEST 2004
@@ -31,7 +31,7 @@ Please refer to u-boot README (general info,
u-boot-x-x-x/README),
to u-boot-x-x-x/board/cobra5272/README and
to the comments in u-boot-x-x-x/include/configs/cobra5272.h
-Configuring u-boot is done by commenting/uncommenting preprocessor defines.
+Configuring U-Boot is done by commenting/uncommenting preprocessor defines.
Default configuration is
@@ -48,10 +48,10 @@ Default configuration is
#-----------------------------------
-# u-boot FLASH version & RAM version
+# U-Boot FLASH version & RAM version
#-----------------------------------
-The u-boot bootloader for Coldfire processors can be configured
+The U-Boot bootloader for Coldfire processors can be configured
1. as a standalone bootloader residing in flash & relocating itself to
RAM on
startup automatically => "FLASH version"
@@ -60,7 +60,7 @@ The u-boot bootloader for Coldfire processors can be
configured
prestage bootloader ("chainloading") & is running only from the RAM
address it
is linked to => "RAM version"
- This version may be very helpful when installing u-boot for the first
time
+ This version may be very helpful when installing U-Boot for the first
time
since it can be used to make available s. th. like a "bootstrap
mechanism".
@@ -71,7 +71,7 @@ How to build the different images:
Flash version
------------------------------
-Compile u-boot
+Compile U-Boot
in dir ./u-boot-x-x-x/
@@ -81,14 +81,14 @@ please first check:
CONFIG_MONITOR_IS_IN_RAM has to be not present in the file
- => u-boot as single bootloader starting from flash
+ => U-Boot as single bootloader starting from flash
in configs/cobra5272_defconfig CONFIG_TEXT_BASE should be
CONFIG_TEXT_BASE=0xffe00000
- => linking address for u-boot as single bootloader stored in flash
+ => linking address for U-Boot as single bootloader stored in flash
then:
@@ -116,7 +116,7 @@ please modify the settings:
CONFIG_MONITOR_IS_IN_RAM=y
- => u-boot as RAM version, chainloaded by another bootloader or using
bdm cable
+ => U-Boot as RAM version, chainloaded by another bootloader or using
bdm cable
in configs/cobra5272_defconfig CONFIG_TEXT_BASE should be
diff --git a/board/emulation/qemu-ppce500/qemu-ppce500.c
b/board/emulation/qemu-ppce500/qemu-ppce500.c
index a39bcb4fa0c7..40fd9e5e02b1 100644
--- a/board/emulation/qemu-ppce500/qemu-ppce500.c
+++ b/board/emulation/qemu-ppce500/qemu-ppce500.c
@@ -318,7 +318,7 @@ ulong get_bus_freq(ulong dummy)
int cpu_numcores(void)
{
/*
- * The QEMU u-boot target only needs to drive the first core,
+ * The QEMU U-Boot target only needs to drive the first core,
* spinning and device tree nodes get driven by QEMU itself
*/
return 1;
diff --git a/doc/board/xilinx/zynq.rst b/doc/board/xilinx/zynq.rst
index 438912fe42c2..76d67bd62ee9 100644
--- a/doc/board/xilinx/zynq.rst
+++ b/doc/board/xilinx/zynq.rst
@@ -83,7 +83,7 @@ Mainline status
---------------
- Added basic board configurations support.
-- Added zynq u-boot bsp code - arch/arm/mach-zynq
+- Added zynq U-Boot bsp code - arch/arm/mach-zynq
- Added zynq boards named - zc70x, zed, microzed, zc770_xm010/xm011/xm012/xm013
- Added zynq drivers:
diff --git a/doc/board/xilinx/zynqmp-r5.rst b/doc/board/xilinx/zynqmp-r5.rst
index 2cd368b0308e..266d07d1193f 100644
--- a/doc/board/xilinx/zynqmp-r5.rst
+++ b/doc/board/xilinx/zynqmp-r5.rst
@@ -26,7 +26,7 @@ configure and build armv7 toolchain::
Notes
^^^^^
-Output fragment is u-boot.
+Output fragment is U-Boot.
Loading
-------
@@ -38,7 +38,7 @@ Bootgen
^^^^^^^
The first way is to use Xilinx FSBL (First stage
-bootloader) to load u-boot and start it. The following bif can be used for boot
+bootloader) to load U-Boot and start it. The following bif can be used for boot
image generation via Xilinx bootgen utility::
diff --git a/doc/imx/mkimage/imximage.txt b/doc/imx/mkimage/imximage.txt
index f2cf23c5dab8..fa4e486661c2 100644
--- a/doc/imx/mkimage/imximage.txt
+++ b/doc/imx/mkimage/imximage.txt
@@ -213,7 +213,7 @@ Disk identifier: 0xb712a870
Device Boot Start End Blocks Id System
/dev/mmcblk0p1 3 16 112455 83 Linux
-I have set 100MB, leaving the first 2 sectors free. I will copy u-boot
+I have set 100MB, leaving the first 2 sectors free. I will copy U-Boot
there.
8. Write the partition table and exit.
diff --git a/doc/usage/environment.rst b/doc/usage/environment.rst
index c6439dde6689..c57b717caaf3 100644
--- a/doc/usage/environment.rst
+++ b/doc/usage/environment.rst
@@ -216,7 +216,7 @@ fdt_high
0xffffffffffffffff (64-bit machines) then
the fdt will not be copied at all on boot. For this
to work it must reside in writable memory, have
- sufficient padding on the end of it for u-boot to
+ sufficient padding on the end of it for U-Boot to
add the information it needs into it, and the memory
must be accessible by the kernel. This usage is strongly discouraged
however as it also stops U-Boot from ensuring the device tree starting
diff --git a/doc/usage/semihosting.rst b/doc/usage/semihosting.rst
index 6a280b455e0c..9303a6364d5d 100644
--- a/doc/usage/semihosting.rst
+++ b/doc/usage/semihosting.rst
@@ -23,7 +23,7 @@ eMMC or other NV media are available.
There are two main ARM virtual Fixed Virtual Platform (FVP) models,
`Versatile Express (VE) FVP and BASE FVP
<http://www.arm.com/products/tools/models/fast-models/foundation-model.php>`_.
-The initial vexpress64 u-boot board created here runs on the VE virtual
+The initial vexpress64 U-Boot board created here runs on the VE virtual
platform using the license-free Foundation_v8 simulator. Fortunately,
the Foundation_v8 simulator also supports the BASE_FVP model which
companies can purchase licenses for and contain much more functionality.
diff --git a/tools/binman/entries.rst b/tools/binman/entries.rst
index e7dfe6b2a363..a8c7423c4005 100644
--- a/tools/binman/entries.rst
+++ b/tools/binman/entries.rst
@@ -2505,7 +2505,7 @@ Properties / Entry arguments:
See Entry_u_boot_ucode for full details of the three entries involved in
this process. This entry updates U-Boot with the offset and size of the
microcode, to allow early x86 boot code to find it without doing anything
-complicated. Otherwise it is the same as the u-boot entry.
+complicated. Otherwise it is the same as the U-Boot entry.
--
2.36.1
