Now that we have Base protocol support, we will be able to check if a given protocol is really supported by the SCMI server (firmware).
Signed-off-by: AKASHI Takahiro <takahiro.aka...@linaro.org> Reviewed-by: Etienne Carriere <etienne.carri...@foss.st.com> --- v3 * new; import this patch from my followup patch set --- drivers/firmware/scmi/scmi_agent-uclass.c | 41 +++++++++++++++++++++-- 1 file changed, 38 insertions(+), 3 deletions(-) diff --git a/drivers/firmware/scmi/scmi_agent-uclass.c b/drivers/firmware/scmi/scmi_agent-uclass.c index 87a667d60124..54e17992af00 100644 --- a/drivers/firmware/scmi/scmi_agent-uclass.c +++ b/drivers/firmware/scmi/scmi_agent-uclass.c @@ -44,6 +44,38 @@ static const struct error_code scmi_linux_errmap[] = { */ struct udevice *scmi_agent; +/** + * scmi_protocol_is_supported - check availability of protocol + * @dev: SCMI agent device + * @proto_id: Identifier of protocol + * + * check if the protocol, @proto_id, is provided by the SCMI agent, + * @dev. + * + * Return: 0 on success, error code otherwise + */ +static bool scmi_protocol_is_supported(struct udevice *dev, + enum scmi_std_protocol proto_id) +{ + struct scmi_agent_priv *priv; + int i; + + if (proto_id == SCMI_PROTOCOL_ID_BASE) + return true; + + priv = dev_get_uclass_plat(dev); + if (!priv) { + dev_err(dev, "No priv data found\n"); + return false; + } + + for (i = 0; i < priv->num_protocols; i++) + if (priv->protocols[i] == proto_id) + return true; + + return false; +} + struct udevice *scmi_get_protocol(struct udevice *dev, enum scmi_std_protocol id) { @@ -380,15 +412,18 @@ static int scmi_bind_protocols(struct udevice *dev) name = ofnode_get_name(node); switch (protocol_id) { case SCMI_PROTOCOL_ID_CLOCK: - if (CONFIG_IS_ENABLED(CLK_SCMI)) + if (CONFIG_IS_ENABLED(CLK_SCMI) && + scmi_protocol_is_supported(dev, protocol_id)) drv = DM_DRIVER_GET(scmi_clock); break; case SCMI_PROTOCOL_ID_RESET_DOMAIN: - if (IS_ENABLED(CONFIG_RESET_SCMI)) + if (IS_ENABLED(CONFIG_RESET_SCMI) && + scmi_protocol_is_supported(dev, protocol_id)) drv = DM_DRIVER_GET(scmi_reset_domain); break; case SCMI_PROTOCOL_ID_VOLTAGE_DOMAIN: - if (IS_ENABLED(CONFIG_DM_REGULATOR_SCMI)) { + if (IS_ENABLED(CONFIG_DM_REGULATOR_SCMI) && + scmi_protocol_is_supported(dev, protocol_id)) { node = ofnode_find_subnode(node, "regulators"); if (!ofnode_valid(node)) { dev_err(dev, "no regulators node\n"); -- 2.34.1