Am 13. September 2023 04:23:14 MESZ schrieb "Wu, Fei" <fei2...@intel.com>:
>On 9/5/2023 6:09 PM, Fei Wu wrote:
>> In order to enable PCIe passthrough on qemu riscv, the physical memory
>> range between 3GB and 4GB is reserved. Therefore if guest has 4GB ram,
>> two ranges are created as [2G, 3G) and [4G, 7G), currently u-boot sets
>> ram_top to 4G - 1 if the gd->ram_top is above 4G in
>> board_get_usable_ram_top(), but that address is not backed by ram. This
>> patch selects the lowest range instead.
>>
>I think multi-range memory layout is a common requirement, PCIe
>passthrough happens to be the first one to require it. Could anyone
>please take a look at this patch and give your comments?
>
>Thanks,
>Fei.
>
>> Signed-off-by: Fei Wu <fei2...@intel.com>
>> ---
>> arch/riscv/cpu/generic/dram.c | 2 +-
>> configs/qemu-riscv64_smode_defconfig | 2 +-
We should consider all riscv64 defconfigs.
Best regards
Heinrich
>> 2 files changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/riscv/cpu/generic/dram.c b/arch/riscv/cpu/generic/dram.c
>> index 44e11bd56c..fb53a57b4e 100644
>> --- a/arch/riscv/cpu/generic/dram.c
>> +++ b/arch/riscv/cpu/generic/dram.c
>> @@ -13,7 +13,7 @@ DECLARE_GLOBAL_DATA_PTR;
>>
>> int dram_init(void)
>> {
>> - return fdtdec_setup_mem_size_base();
>> + return fdtdec_setup_mem_size_base_lowest();
>> }
>>
>> int dram_init_banksize(void)
>> diff --git a/configs/qemu-riscv64_smode_defconfig
>> b/configs/qemu-riscv64_smode_defconfig
>> index 1d0f021ade..de08a49dab 100644
>> --- a/configs/qemu-riscv64_smode_defconfig
>> +++ b/configs/qemu-riscv64_smode_defconfig
>> @@ -1,6 +1,6 @@
>> CONFIG_RISCV=y
>> CONFIG_SYS_MALLOC_LEN=0x800000
>> -CONFIG_NR_DRAM_BANKS=1
>> +CONFIG_NR_DRAM_BANKS=2
>> CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
>> CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
>> CONFIG_ENV_SIZE=0x20000
>
