On 14.09.23 12:08, Mayuresh Chitale wrote:
This series adds support to locate an EFI System Partition on a disk and
boot the next stage from such a parition if found. The next stage image
is expected to be under the FIRMWARE directory as described in the EBBR
specification [1]. Also update the spl_blk_fs and spl_fat drivers to
prefer booting from ESP and fall back to the configured parition in
case of a failure.
These patches are built on top of the following series from Sean Anderson:
https://lists.denx.de/pipermail/u-boot/2023-August/525665.html
[1] :
https://github.com/ARM-software/ebbr/blob/854ba0e68590102667b84a5ba4e0b076a3f5f2cb/source/chapter4-firmware-media.rst
Hello Sean,
your series [1] is in status "changes requested". Will a new version
come up soon, or can this change go first?
Best regards
Heinrich
The patches are also present in the branch below:
https://github.com/mdchitale/u-boot/tree/mchitale_spl_ebbr_v1
Mayuresh Chitale (2):
part: Add a function to find ESP partition
spl: Add support for booting from ESP
common/spl/Kconfig | 7 +++++
common/spl/spl_blk_fs.c | 61 +++++++++++++++++++++++++++++------------
common/spl/spl_fat.c | 34 ++++++++++++++++++++---
disk/part.c | 16 +++++++++++
include/part.h | 10 +++++++
5 files changed, 107 insertions(+), 21 deletions(-)
