On 2023-09-16 18:45, Frank Wunderlich wrote:
> Am 16. September 2023 18:07:44 MESZ schrieb Marek Vasut <ma...@denx.de>:
>> On 9/16/23 16:18, Frank Wunderlich wrote:
>>> Hi,
>>>
>>> just a friedly reminder. would be great if it can be merged in next 
>>> uboot-version.
>>
>> +CC Tom
>>
>>> regards Frank
>>>
>>>
>>>> Gesendet: Sonntag, 20. August 2023 um 18:00 Uhr
>>>> Von: "Frank Wunderlich" <li...@fw-web.de>
>>>> An: u-boot@lists.denx.de
>>>> Cc: "Frank Wunderlich" <fran...@public-files.de>, "Simon Glass" 
>>>> <s...@chromium.org>, "Philipp Tomsich" <philipp.toms...@vrull.eu>, "Kever 
>>>> Yang" <kever.y...@rock-chips.com>, "Marek Vasut" <ma...@denx.de>, "Jonas 
>>>> Karlman" <jo...@kwiboo.se>
>>>> Betreff: [PATCH v3] board: rockchip: Add Bananapi R2Pro Board
>>>>
>>>> From: Frank Wunderlich <fran...@public-files.de>
>>>>
>>>> Add Bananapi R2 Pro board.
>>>>
>>>> Till now evb dts could be used, but iodomain is different
>>>> (evb has 1v8 on vccio2 and vccio4 which are 3v3 on r2pro)
>>>> and with iodomain driver this can cause hardware fault.
>>>>
>>>> Devicetree in mainline-Linux:
>>>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
>>
>> What would be real helpful is a commit ID from which the DT was copied , so 
>> it can be easily updated in the future.
> 
> It is no plain copy...i removed parts not relevant for uboot now (from 
> current linux version). E.g. switch driver is currently bundled in mtk 
> ethernet driver and using different devicetree structure than linux dsa 
> driver. We have to separate it before we can use it on r2pro. But this will 
> take some time...also pcie(-phy) does not have a driver yet,so before adding 
> dead code i dropped these parts for now.

pcie(-phy) should have a working driver for rk3568 as of v2023.10-rc2,
and is extended to support PCIe bifurcation with the following series:

rockchip: rk3568: Fix use of PCIe bifurcation
https://patchwork.ozlabs.org/project/uboot/list/?series=366997&state=*

Regards,
Jonas

> 
> regards Frank

Reply via email to