From: Matt Waddel <matt.wad...@linaro.org>
Added the board specific definitions to use the MMCI device.
Signed-off-by: Matt Waddel <matt.wad...@linaro.org>
---
board/armltd/vexpress/ca9x4_ct_vxp.c | 9 +++++++++
include/configs/ca9x4_ct_vxp.h | 4 ++++
2 files changed, 13 insertions(+), 0 deletions(-)
diff --git a/board/armltd/vexpress/ca9x4_ct_vxp.c
b/board/armltd/vexpress/ca9x4_ct_vxp.c
index ce1be1e..3566b95 100644
--- a/board/armltd/vexpress/ca9x4_ct_vxp.c
+++ b/board/armltd/vexpress/ca9x4_ct_vxp.c
@@ -86,6 +86,15 @@ int board_eth_init(bd_t *bis)
return rc;
}
+int cpu_mmc_init(bd_t *bis)
+{
+ int rc = 0;
+#ifdef CONFIG_ARM_PL180_MMCI
+ rc = arm_pl180_mmci_init();
+#endif
+ return rc;
+}
+
static void flash__init(void)
{
/* Setup the sytem control register to allow writing to flash */
diff --git a/include/configs/ca9x4_ct_vxp.h b/include/configs/ca9x4_ct_vxp.h
index 63f003d..4ab58c0 100644
--- a/include/configs/ca9x4_ct_vxp.h
+++ b/include/configs/ca9x4_ct_vxp.h
@@ -86,6 +86,10 @@
#define CONFIG_MMC 1
#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
+#define CONFIG_ARM_PL180_MMCI
+#define CONFIG_ARM_PL180_MMCI_BASE 0x10005000
+#define CONFIG_SYS_MMC_MAX_BLK_COUNT 127
+#define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ 6250000
/* BOOTP options */
#define CONFIG_BOOTP_BOOTFILESIZE
--
1.7.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
