On 9/21/23 5:49 AM, Manorit Chawdhry wrote:
After the refactor with conf- nodes in fitImage, overlaystring wasn't
didn't handle the new conf- nodes in FIT Booting. Fix get_overlaystring
to handle conf- nodes.

Fixes: 837833a724b7 ("environment: ti: Add get_fit_config command to get FIT config 
string")
Reported-by: Aniket Limaye <a-lim...@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawd...@ti.com>
---
Test Logs:
=> setenv name_overlays ti/k3-dt.dtbo ti/k3-dt1.dtbo
=> run get_overlaystring
=> printenv overlaystring
overlaystring=#conf-ti_k3-dt.dtbo#conf-ti_k3-dt1.dtbo
---
Changes in v2:
- Fix tabs
- Link to v1: 
https://lore.kernel.org/r/20230919-b4-upstream-overlaystring-v1-1-4c56e8d66...@ti.com
---
  include/env/ti/ti_common.env | 11 ++++++++---
  1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/include/env/ti/ti_common.env b/include/env/ti/ti_common.env
index e87a41a6590b..bc554fe7ca6d 100644
--- a/include/env/ti/ti_common.env
+++ b/include/env/ti/ti_common.env
@@ -16,9 +16,14 @@ addr_fit=0x90000000
  name_fit=fitImage
  update_to_fit=setenv loadaddr ${addr_fit}; setenv bootfile ${name_fit}
  get_overlaystring=
-       for overlay in $name_overlays;
-       do;
-       setenv overlaystring ${overlaystring}'#'${overlay};
+       for overlay in $name_overlays; do;
+               if test ${boot_fit} -eq 1;
+                       then

Why is the `then` tabbed out here, you can make it on the end of
the above line, same as you changed for `do`. Then untab all this
by one.

+                               setexpr name_fit_overlay gsub / _ 
conf-${overlay};
+                               setenv overlaystring 
${overlaystring}'#'${name_fit_overlay};
+                       else
+                               setenv overlaystring 
${overlaystring}'#'${overlay};

If you set `overlay` using setexpr, then this line is common and doesn't need to
be out here. Also do we use this overlaystring for anything other than the
FIT case? And if not, why do we need this boot_fit == 1 check at all?

Andrew

+               fi;
        done;
  get_fit_config=setexpr name_fit_config gsub / _ conf-${fdtfile}
  run_fit=run get_fit_config; bootm 
${addr_fit}#${name_fit_config}${overlaystring}

---
base-commit: 2fe4b54556ea6271237b35de68dc458bfceab94c
change-id: 20230915-b4-upstream-overlaystring-207e28b8c5fb

Best regards,

Reply via email to