> From: Fabio Estevam <feste...@denx.de> > Trying to boot a fitImage after a successful hab_auth_img operation > causes the following error: > ## Loading kernel from FIT Image at 88000000 ... > Using 'conf-imx7d-smegw01.dtb' configuration > Trying 'kernel-1' kernel subimage > Description: Linux kernel > Type: Kernel Image > Compression: uncompressed > Data Start: 0x8800010c > Data Size: 9901752 Bytes = 9.4 MiB > Architecture: ARM > OS: Linux > Load Address: 0x80800000 > Entry Point: 0x80800000 > Hash algo: sha256 > Hash value: > 28f8779bbf010780f16dd3d84ecb9b604c44c5c2cf7acd098c264a2d3f68e969 > Verifying Hash Integrity ... sha256Error in SEC deq > CAAM was not setup properly or it is faulty error! > The reason for this error is that the BootROM uses the CAAM Job Ring 0, > so disable its node in U-Boot to avoid the resource conflict. > imx8m dtsi files also have the Job Ring 0 disable since the following > kernel commit: > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/arch?h=v6.5&id=dc9c1ceb555ff661e6fc1081434600771f29657c > For a temporary solution, disable the Job Ring 0 in imx7s-u-boot.dtsi. > Reported-by: Eduard Strehlau <edu...@lionizers.com> > Signed-off-by: Fabio Estevam <feste...@denx.de> Applied to u-boot-imx, master, thanks !
Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Erika Unter HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de =====================================================================