This patch adds another build target for the AMCC Canyonlands
PPC460Ex eval board. Using JTAG debugger(e.g. BDI2000/3000) configured
to setup the SDRAM.
here are TLB entries required by RAM-u-boot (for BDI2000/3000):
WTLB 0x00000095 0x0000003F ;SDRAM 256MB @ 0x00000000
WTLB 0xE0000075 0x4E00003F
WTLB 0xE1000005 0x4E10001B
WTLB 0xE3000054 0x4000003F
keep SDRAM configuration part as it's.
Signed-off-by: Fawaz Gaili <fwaz...@gmail.com>
Cc: Stefan Roese <s...@denx.de>
Cc: Wolfgang Denk <w...@denx.de>
Cc: Felix Radensky <fe...@embedded-sol.com>
---
arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c | 11 +++++++----
arch/powerpc/cpu/ppc4xx/Makefile | 2 ++
board/amcc/canyonlands/canyonlands.c | 3 ++-
board/amcc/canyonlands/u-boot-ram.lds | 96
+++++++++++++++++++++++++++++++++
boards.cfg | 1 +
include/configs/canyonlands.h | 29
++++++++++++++++++++++-------
5 files changed, 130 insertions(+), 12 deletions(-)
create mode 100644 board/amcc/canyonlands/u-boot-ram.lds
diff --git a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c
b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c
index 95df1d9..2660cd2 100644
--- a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c
@@ -66,7 +66,8 @@
"SDRAM_" #mnemonic, SDRAM_##mnemonic, data); \
} while (0)
-#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+#if (!defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_SYS_RAMBOOT)) \
+ || defined(CONFIG_NAND_SPL)
static void update_rdcc(void)
{
u32 val;
@@ -2896,7 +2897,8 @@ phys_size_t initdram(int board_type)
* mustn't be reconfigured again since we're already running
* from SDRAM.
*/
-#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+#if (!defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_SYS_RAMBOOT)) \
+ || defined(CONFIG_NAND_SPL)
unsigned long val;
#if defined(CONFIG_440)
@@ -3013,12 +3015,13 @@ phys_size_t initdram(int board_type)
#endif
#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
-#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_SYS_RAMBOOT) \
+ && !defined(CONFIG_NAND_SPL)
/*------------------------------------------------------------------
| DQS calibration.
+-----------------------------------------------------------------*/
DQS_autocalibration();
-#endif /* !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) */
+#endif /* !defined(CONFIG_NAND_U_BOOT && CONFIG_SYS_RAMBOOT) &&
!defined(CONFIG_NAND_SPL) */
#endif /* CONFIG_PPC4xx_DDR_AUTOCALIBRATION */
/*
diff --git a/arch/powerpc/cpu/ppc4xx/Makefile
b/arch/powerpc/cpu/ppc4xx/Makefile
index d97ca20..02a48f9 100644
--- a/arch/powerpc/cpu/ppc4xx/Makefile
+++ b/arch/powerpc/cpu/ppc4xx/Makefile
@@ -36,9 +36,11 @@ COBJS := 40x_spd_sdram.o
ifndef CONFIG_NAND_SPL
ifndef CONFIG_NAND_U_BOOT
+ifndef CONFIG_SYS_RAMBOOT
COBJS += 44x_spd_ddr.o
endif
endif
+endif
COBJS-$(CONFIG_SDRAM_PPC4xx_IBM_DDR2) += 44x_spd_ddr2.o
COBJS-$(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) += 4xx_ibm_ddr2_autocalib.o
COBJS += 4xx_pci.o
diff --git a/board/amcc/canyonlands/canyonlands.c
b/board/amcc/canyonlands/canyonlands.c
index 80e2739..d70ef20 100644
--- a/board/amcc/canyonlands/canyonlands.c
+++ b/board/amcc/canyonlands/canyonlands.c
@@ -390,7 +390,8 @@ int board_early_init_r (void)
*/
/* Remap the NOR FLASH to 0xcc00.0000 ... 0xcfff.ffff */
-#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) \
+ || defined(CONFIG_SYS_RAMBOOT)
mtebc(PB3CR, CONFIG_SYS_FLASH_BASE_PHYS_L | 0xda000);
#else
mtebc(PB0CR, CONFIG_SYS_FLASH_BASE_PHYS_L | 0xda000);
new file mode 100644
index 0000000..fef0225
--- /dev/null
+++ b/board/amcc/canyonlands/u-boot-ram.lds
@@ -0,0 +1,96 @@
+/*
+ * (C) Copyright 2011
+ * Stefan Roese, DENX Software Engineering, s...@denx.de.
+ * Fawaz Gaili, Nile Centre for Technology Research, fwaz...@gmail.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .text :
+ {
+ arch/powerpc/cpu/ppc4xx/start.o (.text*)
+ board/amcc/canyonlands/init.o (.text*)
+
+ *(.text*)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+ }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ KEEP(*(.got))
+ _GOT2_TABLE_ = .;
+ KEEP(*(.got2))
+ _FIXUP_TABLE_ = .;
+ KEEP(*(.fixup))
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data*)
+ *(.sdata*)
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss (NOLOAD) :
+ {
+ *(.bss*)
+ *(.sbss*)
+ *(COMMON)
+ . = ALIGN(4);
+ }
+
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/boards.cfg b/boards.cfg
index 45c3102..474ecc1 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -675,6 +675,7 @@ bluestone powerpc ppc4xx
- amcc
bubinga powerpc ppc4xx
- amcc
canyonlands powerpc ppc4xx
canyonlands amcc - canyonlands:CANYONLANDS
canyonlands_nand powerpc ppc4xx
canyonlands amcc -
canyonlands:CANYONLANDS,NAND_U_BOOT,SYS_TEXT_BASE=0x01000000
+canyonlands_ramboot powerpc ppc4xx
canyonlands amcc -
canyonlands:CANYONLANDS,SYS_RAMBOOT,SYS_TEXT_BASE=0x01000000,SYS_LDSCRIPT=board/amcc/canyonlands/u-boot-ram.lds
ebony powerpc ppc4xx
- amcc
glacier powerpc ppc4xx
canyonlands amcc - canyonlands:GLACIER
glacier_nand powerpc ppc4xx
canyonlands amcc -
canyonlands:GLACIER,NAND_U_BOOT,SYS_TEXT_BASE=0x01000000
diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h
index 8c03582..6433b9b 100644
--- a/include/configs/canyonlands.h
+++ b/include/configs/canyonlands.h
@@ -139,15 +139,29 @@
/*
* Define here the location of the environment variables (FLASH).
*/
-#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environ vars */
+#define CONFIG_ENV_IS_EMBEDDED 1 /* use embedded environment */
+#elif defined(CONFIG_SYS_RAMBOOT)
+#define CONFIG_ENV_IS_NOWHERE /* Store env in memory only*/
+#define CONFIG_ENV_SIZE (8 << 10)
+/*
+ * In RAM-booting version, we have no environment storage. So we need to
+ * provide at least preliminary MAC addresses for the 4xx EMAC driver to
+ * register the interfaces.
+ */
+#define CONFIG_ETHADDR 4a:56:49:22:3e:43
+#define CONFIG_ETH1ADDR 02:93:53:d5:06:98
+#else
#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment
vars */
#define CONFIG_SYS_NOR_CS 0 /* NOR chip connected to CSx */
#define CONFIG_SYS_NAND_CS 3 /* NAND chip connected to CSx */
-#else
-#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment
vars */
+#endif/*CONFIG_NAND_U_BOOT || CONFIG_NAND_SPL*/
+
+#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) \
+ || defined(CONFIG_SYS_RAMBOOT)
#define CONFIG_SYS_NOR_CS 3 /* NOR chip connected to CSx */
#define CONFIG_SYS_NAND_CS 0 /* NAND chip connected to CSx */
-#define CONFIG_ENV_IS_EMBEDDED 1 /* use embedded environment */
#endif
/*
@@ -251,7 +265,7 @@
/*------------------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------------*/
-#if !defined(CONFIG_NAND_U_BOOT)
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_SYS_RAMBOOT)
#if !defined(CONFIG_ARCHES)
/*
* NAND booting U-Boot version uses a fixed initialization, since the
whole
@@ -324,7 +338,7 @@
#define CONFIG_SYS_SDRAM0_MMODE 0x00000432
#define CONFIG_SYS_SDRAM0_MEMODE 0x00000004
#endif /* !defined(CONFIG_ARCHES) */
-#endif /* !defined(CONFIG_NAND_U_BOOT) */
+#endif /* !defined(CONFIG_NAND_U_BOOT) &&
!defined(CONFIG_SYS_RAMBOOT) */
#define CONFIG_SYS_MBYTES_SDRAM 512 /* 512MB */
@@ -571,7 +585,8 @@
* 0xfe00.0000 -> 4.ce00.0000
*/
-#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) \
+ || defined(CONFIG_SYS_RAMBOOT)
/* Memory Bank 3 (NOR-FLASH) initialization */
#define CONFIG_SYS_EBC_PB3AP 0x10055e00
#define CONFIG_SYS_EBC_PB3CR (CONFIG_SYS_BOOT_BASE_ADDR | 0x9a000)
--
Best Regards
Fawaz Gaili
NCTR
NTC - Tower 8th floor
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
