On 25/09/2023 23:55, Jonas Karlman wrote:
With MMC_PWRSEQ enabled the following link issue may happen when
building SPL and SPL_PWRSEQ is not enabled.
aarch64-linux-gnu-ld.bfd: drivers/mmc/meson_gx_mmc.o: in function
`meson_mmc_probe':
drivers/mmc/meson_gx_mmc.c:295: undefined reference to `pwrseq_set_power'
Fix this by adding a SPL_MMC_PWRSEQ Kconfig option used to enable mmc
pwrseq support in SPL.
Also add depends on DM_GPIO to fix following link issue:
aarch64-linux-gnu-ld.bfd: drivers/mmc/mmc-pwrseq.o: in function
`mmc_pwrseq_set_power':
drivers/mmc/mmc-pwrseq.c:26: undefined reference to `gpio_request_by_name'
aarch64-linux-gnu-ld.bfd: drivers/mmc/mmc-pwrseq.c:29: undefined reference
to `dm_gpio_set_value'
aarch64-linux-gnu-ld.bfd: drivers/mmc/mmc-pwrseq.c:31: undefined reference
to `dm_gpio_set_value'
Signed-off-by: Jonas Karlman <jo...@kwiboo.se>
---
drivers/mmc/Kconfig | 10 +++++++++-
drivers/mmc/Makefile | 2 +-
drivers/mmc/meson_gx_mmc.c | 2 +-
drivers/mmc/rockchip_dw_mmc.c | 2 +-
include/mmc.h | 4 ++--
5 files changed, 14 insertions(+), 6 deletions(-)
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index de01b9687bad..a9931d39412d 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -20,11 +20,19 @@ config MMC_WRITE
config MMC_PWRSEQ
bool "HW reset support for eMMC"
- depends on PWRSEQ
+ depends on PWRSEQ && DM_GPIO
help
Ths select Hardware reset support aka pwrseq-emmc for eMMC
devices.
+config SPL_MMC_PWRSEQ
+ bool "HW reset support for eMMC in SPL"
+ depends on SPL_PWRSEQ && SPL_DM_GPIO
+ default y if MMC_PWRSEQ
+ help
+ Ths select Hardware reset support aka pwrseq-emmc for eMMC
+ devices in SPL.
+
config MMC_BROKEN_CD
bool "Poll for broken card detection case"
help
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 2c65c4765ab2..0a79dd058bef 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -11,7 +11,7 @@ obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += mmc_bootdev.o
endif
obj-$(CONFIG_$(SPL_TPL_)MMC_WRITE) += mmc_write.o
-obj-$(CONFIG_MMC_PWRSEQ) += mmc-pwrseq.o
+obj-$(CONFIG_$(SPL_)MMC_PWRSEQ) += mmc-pwrseq.o
obj-$(CONFIG_MMC_SDHCI_ADMA_HELPERS) += sdhci-adma.o
ifndef CONFIG_$(SPL_)BLK
diff --git a/drivers/mmc/meson_gx_mmc.c b/drivers/mmc/meson_gx_mmc.c
index fcf4f03d1e24..0825c0a2a838 100644
--- a/drivers/mmc/meson_gx_mmc.c
+++ b/drivers/mmc/meson_gx_mmc.c
@@ -288,7 +288,7 @@ static int meson_mmc_probe(struct udevice *dev)
mmc_set_clock(mmc, cfg->f_min, MMC_CLK_ENABLE);
-#ifdef CONFIG_MMC_PWRSEQ
+#if CONFIG_IS_ENABLED(MMC_PWRSEQ)
/* Enable power if needed */
ret = mmc_pwrseq_get_power(dev, cfg);
if (!ret) {
diff --git a/drivers/mmc/rockchip_dw_mmc.c b/drivers/mmc/rockchip_dw_mmc.c
index 72c820ee6330..ad4529d6afa8 100644
--- a/drivers/mmc/rockchip_dw_mmc.c
+++ b/drivers/mmc/rockchip_dw_mmc.c
@@ -145,7 +145,7 @@ static int rockchip_dwmmc_probe(struct udevice *dev)
host->fifo_mode = priv->fifo_mode;
-#ifdef CONFIG_MMC_PWRSEQ
+#if CONFIG_IS_ENABLED(MMC_PWRSEQ)
/* Enable power if needed */
ret = mmc_pwrseq_get_power(dev, &plat->cfg);
if (!ret) {
diff --git a/include/mmc.h b/include/mmc.h
index 1022db3ffa7c..9aef31ea5deb 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -590,7 +590,7 @@ struct mmc_config {
uint f_max;
uint b_max;
unsigned char part_type;
-#ifdef CONFIG_MMC_PWRSEQ
+#if CONFIG_IS_ENABLED(MMC_PWRSEQ)
struct udevice *pwr_dev;
#endif
};
@@ -808,7 +808,7 @@ int mmc_deinit(struct mmc *mmc);
*/
int mmc_of_parse(struct udevice *dev, struct mmc_config *cfg);
-#ifdef CONFIG_MMC_PWRSEQ
+#if CONFIG_IS_ENABLED(MMC_PWRSEQ)
/**
* mmc_pwrseq_get_power() - get a power device from device tree
*
Reviewed-by: Neil Armstrong <neil.armstr...@linaro.org>
