[PATCH v2 05/22] pinctrl: sunxi: add GPIO in/out wrappers

[Andre Przywara]

So far we were open-coding the pincontroller's GPIO output/input access
in each function using that.

Provide functions that wrap that nicely, and follow the existing pattern
(set/get_{bank,}), so users don't need to know about the internals, and
we can abstract the new D1 pinctrl more easily.

Signed-off-by: Andre Przywara <andre.przyw...@arm.com>
---
 drivers/gpio/sunxi_gpio.c | 55 ++++++++++++++++++---------------------
 1 file changed, 25 insertions(+), 30 deletions(-)

diff --git a/drivers/gpio/sunxi_gpio.c b/drivers/gpio/sunxi_gpio.c
index 71c3168b755..a4b336943b6 100644
--- a/drivers/gpio/sunxi_gpio.c
+++ b/drivers/gpio/sunxi_gpio.c
@@ -81,6 +81,19 @@ int sunxi_gpio_get_cfgpin(u32 pin)
        return sunxi_gpio_get_cfgbank(pio, pin);
 }
 
+static void sunxi_gpio_set_output_bank(struct sunxi_gpio *pio,
+                                      int pin, bool set)
+{
+       u32 mask = 1U << pin;
+
+       clrsetbits_le32(&pio->dat, set ? 0 : mask, set ? mask : 0);
+}
+
+static int sunxi_gpio_get_output_bank(struct sunxi_gpio *pio, int pin)
+{
+       return !!(readl(&pio->dat) & (1U << pin));
+}
+
 void sunxi_gpio_set_drv(u32 pin, u32 val)
 {
        u32 bank = GPIO_BANK(pin);
@@ -117,35 +130,20 @@ void sunxi_gpio_set_pull_bank(struct sunxi_gpio *pio, int 
bank_offset, u32 val)
 /* =========== Non-DM code, used by the SPL. ============ */
 
 #if !CONFIG_IS_ENABLED(DM_GPIO)
-static int sunxi_gpio_output(u32 pin, u32 val)
+static void sunxi_gpio_set_output(u32 pin, bool set)
 {
-       u32 dat;
        u32 bank = GPIO_BANK(pin);
-       u32 num = GPIO_NUM(pin);
        struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
 
-       dat = readl(&pio->dat);
-       if (val)
-               dat |= 0x1 << num;
-       else
-               dat &= ~(0x1 << num);
-
-       writel(dat, &pio->dat);
-
-       return 0;
+       sunxi_gpio_set_output_bank(pio, GPIO_NUM(pin), set);
 }
 
-static int sunxi_gpio_input(u32 pin)
+static int sunxi_gpio_get_output(u32 pin)
 {
-       u32 dat;
        u32 bank = GPIO_BANK(pin);
-       u32 num = GPIO_NUM(pin);
        struct sunxi_gpio *pio = BANK_TO_GPIO(bank);
 
-       dat = readl(&pio->dat);
-       dat >>= num;
-
-       return dat & 0x1;
+       return sunxi_gpio_get_output_bank(pio, GPIO_NUM(pin));
 }
 
 int gpio_request(unsigned gpio, const char *label)
@@ -168,18 +166,21 @@ int gpio_direction_input(unsigned gpio)
 int gpio_direction_output(unsigned gpio, int value)
 {
        sunxi_gpio_set_cfgpin(gpio, SUNXI_GPIO_OUTPUT);
+       sunxi_gpio_set_output(gpio, value);
 
-       return sunxi_gpio_output(gpio, value);
+       return 0;
 }
 
 int gpio_get_value(unsigned gpio)
 {
-       return sunxi_gpio_input(gpio);
+       return sunxi_gpio_get_output(gpio);
 }
 
 int gpio_set_value(unsigned gpio, int value)
 {
-       return sunxi_gpio_output(gpio, value);
+       sunxi_gpio_set_output(gpio, value);
+
+       return 0;
 }
 
 int sunxi_name_to_gpio(const char *name)
@@ -231,13 +232,8 @@ int sunxi_name_to_gpio(const char *name)
 static int sunxi_gpio_get_value(struct udevice *dev, unsigned offset)
 {
        struct sunxi_gpio_plat *plat = dev_get_plat(dev);
-       u32 num = GPIO_NUM(offset);
-       unsigned dat;
-
-       dat = readl(&plat->regs->dat);
-       dat >>= num;
 
-       return dat & 0x1;
+       return sunxi_gpio_get_output_bank(plat->regs, offset) & 0x1;
 }
 
 static int sunxi_gpio_get_function(struct udevice *dev, unsigned offset)
@@ -275,9 +271,8 @@ static int sunxi_gpio_set_flags(struct udevice *dev, 
unsigned int offset,
 
        if (flags & GPIOD_IS_OUT) {
                u32 value = !!(flags & GPIOD_IS_OUT_ACTIVE);
-               u32 num = GPIO_NUM(offset);
 
-               clrsetbits_le32(&plat->regs->dat, 1 << num, value << num);
+               sunxi_gpio_set_output_bank(plat->regs, offset, value);
                sunxi_gpio_set_cfgbank(plat->regs, offset, SUNXI_GPIO_OUTPUT);
        } else if (flags & GPIOD_IS_IN) {
                u32 pull = 0;
-- 
2.35.8