Hi Roger,
On Thu, 5 Oct 2023 at 07:07, Roger Quadros <rog...@kernel.org> wrote:
>
> Switch to using bootstd. Note with this change, we will stop using
> distro_bootcmd and instead depend entirely on bootflow method of
> starting the system up.
>
> Drop header files that are no longer needed in am64x_evm.h.
> k3_dfu.h is available via k3_dfu.env in am64x.env.
>
> Drop unused macro CFG_SYS_SDRAM_BASE1.
>
> Signed-off-by: Roger Quadros <rog...@kernel.org>
> ---
> board/ti/am64x/am64x.env | 1 +
> configs/am64x_evm_a53_defconfig | 5 +++--
> include/configs/am64x_evm.h | 9 ---------
> 3 files changed, 4 insertions(+), 11 deletions(-)
>
> diff --git a/board/ti/am64x/am64x.env b/board/ti/am64x/am64x.env
> index 68e42222b7..efd736b99b 100644
> --- a/board/ti/am64x/am64x.env
> +++ b/board/ti/am64x/am64x.env
> @@ -15,6 +15,7 @@ console=ttyS2,115200n8
> args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 ${mtdparts}
> run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}
>
> +boot_targets=mmc1 mmc0 usb pxe dhcp
> boot=mmc
> mmcdev=1
> bootpart=1:2
> diff --git a/configs/am64x_evm_a53_defconfig b/configs/am64x_evm_a53_defconfig
> index 718ad176cb..43bfcf957a 100644
> --- a/configs/am64x_evm_a53_defconfig
> +++ b/configs/am64x_evm_a53_defconfig
> @@ -31,8 +31,9 @@ CONFIG_SPL_SPI=y
> # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> CONFIG_SPL_LOAD_FIT=y
> CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
> -CONFIG_DISTRO_DEFAULTS=y
> -CONFIG_BOOTCOMMAND="run envboot; run distro_bootcmd;"
> +CONFIG_BOOTSTD_FULL=y
> +CONFIG_BOOTSTD_DEFAULTS=y
> +CONFIG_BOOTCOMMAND="run envboot; bootflow scan -lb"
> CONFIG_BOARD_LATE_INIT=y
> CONFIG_SPL_MAX_SIZE=0x180000
> CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
> diff --git a/include/configs/am64x_evm.h b/include/configs/am64x_evm.h
> index 062102a610..f9f8c7bc2f 100644
> --- a/include/configs/am64x_evm.h
> +++ b/include/configs/am64x_evm.h
> @@ -9,15 +9,6 @@
> #ifndef __CONFIG_AM642_EVM_H
> #define __CONFIG_AM642_EVM_H
>
> -#include <linux/sizes.h>
> -#include <config_distro_bootcmd.h>
> -#include <env/ti/mmc.h>
> -#include <asm/arch/am64_hardware.h>
> -#include <env/ti/k3_dfu.h>
> -
> -/* DDR Configuration */
> -#define CFG_SYS_SDRAM_BASE1 0x880000000
> -
> /* Now for the remaining common defines */
> #include <configs/ti_armv7_common.h>
It looks like this file still includes distro_bootcmd and defines all
the BOOT_TARGET things. Can they be dropped? Perhaps for now they
could be put behind an #ifdef if other boards need them?
I suspect that with your patch as is, the environment is still full of scripts?
>
> --
> 2.34.1
>
Regards,
Simon
