Hi, Fabio, 2011/3/11 Fabio Estevam <fabio.este...@freescale.com>: > Use the same method of the Linux kernel to print the MX31 silicon version on > boot. > > Tested on a MX31PDK with a 2.0 silicon, where it shows: > > CPU: Freescale i.MX31 at 531 MHz > MX31 silicon rev 2.0 > > Signed-off-by: Fabio Estevam <fabio.este...@freescale.com> > --- > arch/arm/cpu/arm1136/mx31/generic.c | 18 ++++++++++++ > arch/arm/include/asm/arch-mx31/mx31-regs.h | 4 ++ > arch/arm/include/asm/imx_soc_revision.h | 42 > ++++++++++++++++++++++++++++ > 3 files changed, 64 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/include/asm/imx_soc_revision.h > > diff --git a/arch/arm/cpu/arm1136/mx31/generic.c > b/arch/arm/cpu/arm1136/mx31/generic.c > index 8bd23ee..4791449 100644 > --- a/arch/arm/cpu/arm1136/mx31/generic.c > +++ b/arch/arm/cpu/arm1136/mx31/generic.c > @@ -24,6 +24,7 @@ > #include <common.h> > #include <asm/arch/mx31-regs.h> > #include <asm/io.h> > +#include <asm/imx_soc_revision.h> > > static u32 mx31_decode_pll(u32 reg, u32 infreq) > { > @@ -106,11 +107,28 @@ void mx31_set_pad(enum iomux_pins pin, u32 config) > > } > > +void mx31_read_cpu_rev(void) > +{ > + u32 i, srev; > + > + /* read SREV register from IIM module */ > + srev = __raw_readl(MX31_IIM_BASE_ADDR + MXC_IIMSREV);
Need use struct way to access srev. [code snip] > 1.6.0.4 > > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot