> From: Hiago De Franco <hiago.fra...@toradex.com>
> Add detection of eMMC vs NAND devices on the Colibri iMX7
> board. A GPIO is configured to detect the presence of an on-board resistor
> that is configured differently based on the flash memory used. Depending on
> the detection result, the 'variant' environment variable is set to '-emmc'
> or cleared, indicating the type of storage device.
> This enhancement improves variant detection during system initialization
> through USB recovery mode, where U-Boot is loaded directly to RAM. This
> allows variant detection for an accurate device tree selection.
> Signed-off-by: Hiago De Franco <hiago.fra...@toradex.com>
> Acked-by: Marcel Ziswiler <marcel.ziswi...@toradex.com>
> Reviewed-by: Fabio Estevam <feste...@gmail.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,        Managing Director: Erika Unter  
HRB 165235 Munich,   Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================

Reply via email to