From: Fabio Estevam <feste...@denx.de>
Sync imx8mm.dtsi with linux-next 20231019.
The motivation for doing this sync was a bug when doing "ums 0 mmc 1"
on imx8mm-evk. It worked well for the first time, but after doing
a CTRL+C and launching the ums again, the command did not work.
Adam Ford suggested to sync imx8mm.dtsi with the Linux dts, as there was
a recent USB power domain reorganization there.
After syncing the imx8mm.dtsi with Linux, the ums command works without
problem after a CTRL+C.
Suggested-by: Adam Ford <aford...@gmail.com>
Signed-off-by: Fabio Estevam <feste...@denx.de>
---
Changes since v1:
- Rebased against latest U-Boot and synced with linux-next 20231019.
arch/arm/dts/imx8mm.dtsi | 153 +++++++++++++++++++++++++++++++++------
1 file changed, 129 insertions(+), 24 deletions(-)
diff --git a/arch/arm/dts/imx8mm.dtsi b/arch/arm/dts/imx8mm.dtsi
index afb90f59c83c..738024baaa57 100644
--- a/arch/arm/dts/imx8mm.dtsi
+++ b/arch/arm/dts/imx8mm.dtsi
@@ -139,6 +139,7 @@
A53_L2: l2-cache0 {
compatible = "cache";
cache-level = <2>;
+ cache-unified;
cache-size = <0x80000>;
cache-line-size = <64>;
cache-sets = <512>;
@@ -276,6 +277,7 @@
assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
clock-names = "main_clk";
+ power-domains = <&pgc_otg1>;
};
usbphynop2: usbphynop2 {
@@ -285,6 +287,7 @@
assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
clock-names = "main_clk";
+ power-domains = <&pgc_otg2>;
};
soc: soc@0 {
@@ -396,6 +399,7 @@
"pll8k", "pll11k",
"clkext3";
dmas = <&sdma2 24 25 0x80000000>;
dma-names = "rx";
+ #sound-dai-cells = <0>;
status = "disabled";
};
@@ -493,6 +497,8 @@
compatible = "fsl,imx8mm-tmu";
reg = <0x30260000 0x10000>;
clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
+ nvmem-cells = <&tmu_calib>;
+ nvmem-cell-names = "calib";
#thermal-sensor-cells = <0>;
};
@@ -547,8 +553,8 @@
reg = <0x30330000 0x10000>;
};
- gpr: iomuxc-gpr@30340000 {
- compatible = "fsl,imx8mm-iomuxc-gpr",
"fsl,imx6q-iomuxc-gpr", "syscon";
+ gpr: syscon@30340000 {
+ compatible = "fsl,imx8mm-iomuxc-gpr", "syscon";
reg = <0x30340000 0x10000>;
};
@@ -560,22 +566,40 @@
#address-cells = <1>;
#size-cells = <1>;
- imx8mm_uid: unique-id@410 {
+ /*
+ * The register address below maps to the MX8M
+ * Fusemap Description Table entries this way.
+ * Assuming
+ * reg = <ADDR SIZE>;
+ * then
+ * Fuse Address = (ADDR * 4) + 0x400
+ * Note that if SIZE is greater than 4, then
+ * each subsequent fuse is located at offset
+ * +0x10 in Fusemap Description Table (e.g.
+ * reg = <0x4 0x8> describes fuses 0x410 and
+ * 0x420).
+ */
+ imx8mm_uid: unique-id@4 { /* 0x410-0x420 */
reg = <0x4 0x8>;
};
- cpu_speed_grade: speed-grade@10 {
+ cpu_speed_grade: speed-grade@10 { /* 0x440 */
reg = <0x10 4>;
};
- fec_mac_address: mac-address@90 {
+ tmu_calib: calib@3c { /* 0x4f0 */
+ reg = <0x3c 4>;
+ };
+
+ fec_mac_address: mac-address@90 { /* 0x640 */
reg = <0x90 6>;
};
};
- anatop: anatop@30360000 {
- compatible = "fsl,imx8mm-anatop", "syscon";
+ anatop: clock-controller@30360000 {
+ compatible = "fsl,imx8mm-anatop";
reg = <0x30360000 0x10000>;
+ #clock-cells = <1>;
};
snvs: snvs@30370000 {
@@ -674,13 +698,11 @@
pgc_otg1: power-domain@2 {
#power-domain-cells = <0>;
reg =
<IMX8MM_POWER_DOMAIN_OTG1>;
- power-domains = <&pgc_hsiomix>;
};
pgc_otg2: power-domain@3 {
#power-domain-cells = <0>;
reg =
<IMX8MM_POWER_DOMAIN_OTG2>;
- power-domains = <&pgc_hsiomix>;
};
pgc_gpumix: power-domain@4 {
@@ -1098,6 +1120,61 @@
#size-cells = <1>;
ranges = <0x32c00000 0x32c00000 0x400000>;
+ lcdif: lcdif@32e00000 {
+ compatible = "fsl,imx8mm-lcdif",
"fsl,imx6sx-lcdif";
+ reg = <0x32e00000 0x10000>;
+ clocks = <&clk IMX8MM_CLK_LCDIF_PIXEL>,
+ <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+ <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
+ clock-names = "pix", "axi", "disp_axi";
+ assigned-clocks = <&clk IMX8MM_CLK_LCDIF_PIXEL>,
+ <&clk IMX8MM_CLK_DISP_AXI>,
+ <&clk IMX8MM_CLK_DISP_APB>;
+ assigned-clock-parents = <&clk
IMX8MM_VIDEO_PLL1_OUT>,
+ <&clk
IMX8MM_SYS_PLL2_1000M>,
+ <&clk
IMX8MM_SYS_PLL1_800M>;
+ assigned-clock-rates = <594000000>,
<500000000>, <200000000>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&disp_blk_ctrl
IMX8MM_DISPBLK_PD_LCDIF>;
+ status = "disabled";
+
+ port {
+ lcdif_to_dsim: endpoint {
+ remote-endpoint =
<&dsim_from_lcdif>;
+ };
+ };
+ };
+
+ mipi_dsi: dsi@32e10000 {
+ compatible = "fsl,imx8mm-mipi-dsim";
+ reg = <0x32e10000 0x400>;
+ clocks = <&clk IMX8MM_CLK_DSI_CORE>,
+ <&clk IMX8MM_CLK_DSI_PHY_REF>;
+ clock-names = "bus_clk", "sclk_mipi";
+ assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>,
+ <&clk IMX8MM_CLK_DSI_PHY_REF>;
+ assigned-clock-parents = <&clk
IMX8MM_SYS_PLL1_266M>,
+ <&clk IMX8MM_CLK_24M>;
+ assigned-clock-rates = <266000000>, <24000000>;
+ samsung,pll-clock-frequency = <24000000>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&disp_blk_ctrl
IMX8MM_DISPBLK_PD_MIPI_DSI>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dsim_from_lcdif: endpoint {
+ remote-endpoint =
<&lcdif_to_dsim>;
+ };
+ };
+ };
+ };
+
csi: csi@32e20000 {
compatible = "fsl,imx8mm-csi", "fsl,imx7-csi";
reg = <0x32e20000 0x1000>;
@@ -1145,10 +1222,9 @@
compatible = "fsl,imx8mm-mipi-csi2";
reg = <0x32e30000 0x1000>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- assigned-clocks = <&clk IMX8MM_CLK_CSI1_CORE>,
- <&clk
IMX8MM_CLK_CSI1_PHY_REF>;
- assigned-clock-parents = <&clk
IMX8MM_SYS_PLL2_1000M>,
- <&clk
IMX8MM_SYS_PLL2_1000M>;
+ assigned-clocks = <&clk IMX8MM_CLK_CSI1_CORE>;
+ assigned-clock-parents = <&clk
IMX8MM_SYS_PLL2_1000M>;
+
clock-frequency = <333000000>;
clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
<&clk IMX8MM_CLK_CSI1_ROOT>,
@@ -1177,7 +1253,7 @@
};
usbotg1: usb@32e40000 {
- compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
+ compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb",
"fsl,imx27-usb";
reg = <0x32e40000 0x200>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
@@ -1186,18 +1262,19 @@
assigned-clock-parents = <&clk
IMX8MM_SYS_PLL2_500M>;
phys = <&usbphynop1>;
fsl,usbmisc = <&usbmisc1 0>;
- power-domains = <&pgc_otg1>;
+ power-domains = <&pgc_hsiomix>;
status = "disabled";
};
usbmisc1: usbmisc@32e40200 {
- compatible = "fsl,imx8mm-usbmisc",
"fsl,imx7d-usbmisc";
+ compatible = "fsl,imx8mm-usbmisc",
"fsl,imx7d-usbmisc",
+ "fsl,imx6q-usbmisc";
#index-cells = <1>;
reg = <0x32e40200 0x200>;
};
usbotg2: usb@32e50000 {
- compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
+ compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb",
"fsl,imx27-usb";
reg = <0x32e50000 0x200>;
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
@@ -1206,12 +1283,13 @@
assigned-clock-parents = <&clk
IMX8MM_SYS_PLL2_500M>;
phys = <&usbphynop2>;
fsl,usbmisc = <&usbmisc2 0>;
- power-domains = <&pgc_otg2>;
+ power-domains = <&pgc_hsiomix>;
status = "disabled";
};
usbmisc2: usbmisc@32e50200 {
- compatible = "fsl,imx8mm-usbmisc",
"fsl,imx7d-usbmisc";
+ compatible = "fsl,imx8mm-usbmisc",
"fsl,imx7d-usbmisc",
+ "fsl,imx6q-usbmisc";
#index-cells = <1>;
reg = <0x32e50200 0x200>;
};
@@ -1238,16 +1316,15 @@
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
#dma-cells = <1>;
dma-channels = <4>;
clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
};
- gpmi: nand-controller@33002000{
+ gpmi: nand-controller@33002000 {
compatible = "fsl,imx8mm-gpmi-nand",
"fsl,imx7d-gpmi-nand";
#address-cells = <1>;
- #size-cells = <1>;
+ #size-cells = <0>;
reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
reg-names = "gpmi-nand", "bch";
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -1268,8 +1345,8 @@
#size-cells = <2>;
device_type = "pci";
bus-range = <0x00 0xff>;
- ranges = <0x81000000 0 0x00000000 0x1ff80000 0
0x00010000 /* downstream I/O 64KB */
- 0x82000000 0 0x18000000 0x18000000 0
0x07f00000>; /* non-prefetchable memory */
+ ranges = <0x81000000 0 0x00000000 0x1ff80000 0
0x00010000>, /* downstream I/O 64KB */
+ <0x82000000 0 0x18000000 0x18000000 0
0x07f00000>; /* non-prefetchable memory */
num-lanes = <1>;
num-viewport = <4>;
interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
@@ -1282,12 +1359,40 @@
<0 0 0 4 &gic GIC_SPI 122
IRQ_TYPE_LEVEL_HIGH>;
fsl,max-link-speed = <2>;
linux,pci-domain = <0>;
+ clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>,
+ <&clk IMX8MM_CLK_PCIE1_PHY>,
+ <&clk IMX8MM_CLK_PCIE1_AUX>;
+ clock-names = "pcie", "pcie_bus", "pcie_aux";
+ power-domains = <&pgc_pcie>;
+ resets = <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
+ <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
+ reset-names = "apps", "turnoff";
+ phys = <&pcie_phy>;
+ phy-names = "pcie-phy";
+ status = "disabled";
+ };
+
+ pcie0_ep: pcie-ep@33800000 {
+ compatible = "fsl,imx8mm-pcie-ep";
+ reg = <0x33800000 0x400000>,
+ <0x18000000 0x8000000>;
+ reg-names = "dbi", "addr_space";
+ num-lanes = <1>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "dma";
+ fsl,max-link-speed = <2>;
+ clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>,
+ <&clk IMX8MM_CLK_PCIE1_PHY>,
+ <&clk IMX8MM_CLK_PCIE1_AUX>;
+ clock-names = "pcie", "pcie_bus", "pcie_aux";
power-domains = <&pgc_pcie>;
resets = <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
<&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
reset-names = "apps", "turnoff";
phys = <&pcie_phy>;
phy-names = "pcie-phy";
+ num-ib-windows = <4>;
+ num-ob-windows = <4>;
status = "disabled";
};
--
2.34.1
