Hi Fabio Thanks!
On Wed, 2023-10-25 at 09:20 -0300, Fabio Estevam wrote: > Hi Marcel, > > On Tue, Oct 24, 2023 at 10:16 AM Marcel Ziswiler > <marcel.ziswi...@toradex.com> wrote: > > > Yes, regular eMMC boot. Serial download also works for me (note this > > requires a patch still not merged > > upstream > > I tried the top of tree U-Boot on the imx8mp-evk and I was not able to > reproduce the error here. > > Below is the boot log from the SD card: Yes, it only seems to be an issue for the eMMC Fastboot case as that one has some special handling (whatever that is). > U-Boot SPL 2024.01-rc1-00054-gfb428b618194 (Oct 25 2023 - 09:17:12 -0300) > SEC0: RNG instantiated > Normal Boot > WDT: Started watchdog@30280000 with servicing every 1000ms (60s timeout) > Trying to boot from BOOTROM > Boot Stage: Primary boot > image offset 0x8000, pagesize 0x200, ivt offset 0x0 > NOTICE: BL31: v2.6(release):lf-6.1.1-1.0.0-0-g616a4588f333 > NOTICE: BL31: Built : 10:38:04, Oct 12 2023 > > > U-Boot 2024.01-rc1-00054-gfb428b618194 (Oct 25 2023 - 09:17:12 -0300) > > CPU: Freescale i.MX8MP[8] rev1.0 at 1200 MHz > Reset cause: POR > Model: NXP i.MX8MPlus EVK board > DRAM: 6 GiB > Core: 103 devices, 26 uclasses, devicetree: separate > WDT: Started watchdog@30280000 with servicing every 1000ms (60s timeout) > MMC: FSL_SDHC: 1, FSL_SDHC: 2 > Loading Environment from MMC... OK > In: serial@30890000 > Out: serial@30890000 > Err: serial@30890000 > SEC0: RNG instantiated > Net: > Error: ethernet@30bf0000 address not set. > > Error: ethernet@30be0000 address not set. > Could not get PHY for FEC0: addr 1 > > Error: ethernet@30bf0000 address not set. > > Error: ethernet@30bf0000 address not set. > No ethernet found. > > Hit any key to stop autoboot: 0 > u-boot=>