For the kmsupx5 a new header file was introduced km8321-common.h. Now the common stuff from tuxa1, tuda1 and suvd3 was removed and the new header file included.
The defines CONFIG_SYS_PIGGY_BASE and CONFIG_SYS_PIGGY_SIZE are confusing. Because they actually describe the KMBEC FPGA values. The KMBEC FPGA can be PRIO on kmeter1 or upio on mgcoge. Therefore all the defines were renamed. remove unneeded variable CONFIG_KM_DEF_NETDEV, as it is already declared in keymile-common.h Signed-off-by: Holger Brunck <holger.bru...@keymile.com> Signed-off-by: Heiko Schocher <h...@denx.de> cc: Kim Phillips <kim.phill...@freescale.com> cc: Wolfgang Denk <w...@denx.de> cc: Valentin Longchamp <valentin.longch...@keymile.com> --- Changes for v2: - fix checkpatch.pl errors and warnings board/keymile/common/common.c | 3 +- board/keymile/km83xx/km83xx.c | 4 +- board/keymile/mgcoge/mgcoge.c | 4 +- include/configs/keymile-common.h | 2 +- include/configs/km82xx-common.h | 12 ++-- include/configs/km8321-common.h | 7 +-- include/configs/km83xx-common.h | 19 +++--- include/configs/kmeter1.h | 8 ++- include/configs/suvd3.h | 115 +------------------------------------- include/configs/tuda1.h | 112 +------------------------------------ include/configs/tuxa1.h | 114 +------------------------------------- 11 files changed, 36 insertions(+), 364 deletions(-) diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c index f723cfa..e84c214 100644 --- a/board/keymile/common/common.c +++ b/board/keymile/common/common.c @@ -582,7 +582,8 @@ int fdt_get_node_and_value (void *blob, #if !defined(MACH_TYPE_KM_KIRKWOOD) int ethernet_present (void) { - return (in_8((u8 *)CONFIG_SYS_PIGGY_BASE + CONFIG_SYS_SLOT_ID_OFF) & 0x80); + return in_8((u8 *)CONFIG_SYS_KMBEC_FPGA_BASE + CONFIG_SYS_SLOT_ID_OFF) + & 0x80; } #endif diff --git a/board/keymile/km83xx/km83xx.c b/board/keymile/km83xx/km83xx.c index d85bbe7..a085d7e 100644 --- a/board/keymile/km83xx/km83xx.c +++ b/board/keymile/km83xx/km83xx.c @@ -158,9 +158,9 @@ int board_early_init_r(void) break; } /* enable the PHY on the PIGGY */ - setbits(8, (void *)(CONFIG_SYS_PIGGY_BASE + 0x10003), 0x01); + setbits(8, (void *)(CONFIG_SYS_KMBEC_FPGA_BASE + 0x10003), 0x01); /* enable the Unit LED (green) */ - setbits(8, (void *)(CONFIG_SYS_PIGGY_BASE + 0x00002), 0x01); + setbits(8, (void *)(CONFIG_SYS_KMBEC_FPGA_BASE + 0x00002), 0x01); #if defined(CONFIG_SUVD3) /* configure UPMA for APP1 */ diff --git a/board/keymile/mgcoge/mgcoge.c b/board/keymile/mgcoge/mgcoge.c index 1a6bdd8..f973b8d 100644 --- a/board/keymile/mgcoge/mgcoge.c +++ b/board/keymile/mgcoge/mgcoge.c @@ -304,9 +304,9 @@ int board_early_init_r (void) { /* setup the UPIOx */ /* General Unit Reset disabled, Flash Bank enabled, UnitLed on */ - out_8((u8 *)(CONFIG_SYS_PIGGY_BASE + 0x02), 0xc2); + out_8((u8 *)(CONFIG_SYS_KMBEC_FPGA_BASE + 0x02), 0xc2); /* SCC4 enable, halfduplex, FCC1 powerdown */ - out_8((u8 *)(CONFIG_SYS_PIGGY_BASE + 0x03), 0x15); + out_8((u8 *)(CONFIG_SYS_KMBEC_FPGA_BASE + 0x03), 0x15); return 0; } diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h index f548994..0927ce3 100644 --- a/include/configs/keymile-common.h +++ b/include/configs/keymile-common.h @@ -102,7 +102,7 @@ * driver to set the MAC. */ #define CONFIG_CHECK_ETHERNET_PRESENT -#define CONFIG_SYS_SLOT_ID_BASE CONFIG_SYS_PIGGY_BASE +#define CONFIG_SYS_SLOT_ID_BASE CONFIG_SYS_KMBEC_FPGA_BASE #define CONFIG_SYS_SLOT_ID_OFF (0x07) /* register offset */ #define CONFIG_SYS_SLOT_ID_MASK (0x3f) /* mask for slot ID bits */ diff --git a/include/configs/km82xx-common.h b/include/configs/km82xx-common.h index 262536c..47d5437 100644 --- a/include/configs/km82xx-common.h +++ b/include/configs/km82xx-common.h @@ -271,19 +271,19 @@ PSDMR_WRC_1C |\ PSDMR_CL_2) -/* GPIO/PIGGY on CS3 initialization values +/* UPIO FPGA (GPIO/PIGGY) on CS3 initialization values */ -#define CONFIG_SYS_PIGGY_BASE 0x30000000 -#define CONFIG_SYS_PIGGY_SIZE 128 +#define CONFIG_SYS_KMBEC_FPGA_BASE 0x30000000 +#define CONFIG_SYS_KMBEC_FPGA_SIZE 128 -#define CONFIG_SYS_BR3_PRELIM ((CONFIG_SYS_PIGGY_BASE & BRx_BA_MSK) |\ +#define CONFIG_SYS_BR3_PRELIM ((CONFIG_SYS_KMBEC_FPGA_BASE & BRx_BA_MSK) |\ BRx_PS_8 | BRx_MS_GPCM_P | BRx_V) -#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_PIGGY_SIZE) |\ +#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_KMBEC_FPGA_SIZE) |\ ORxG_CSNT | ORxG_ACS_DIV2 |\ ORxG_SCY_3_CLK | ORxG_TRLX) -/* Board FPGA on CS4 initialization values +/* BFTICU board FPGA on CS4 initialization values */ #define CONFIG_SYS_FPGA_BASE 0x40000000 #define CONFIG_SYS_FPGA_SIZE 1 /*1KB*/ diff --git a/include/configs/km8321-common.h b/include/configs/km8321-common.h index 9e48388..9458289 100644 --- a/include/configs/km8321-common.h +++ b/include/configs/km8321-common.h @@ -33,9 +33,6 @@ #define CONFIG_MPC832x /* MPC832x CPU specific */ #define CONFIG_KM8321 /* Keymile PBEC8321 board specific */ -#define CONFIG_KM_DEF_NETDEV \ - "netdev=eth0\0" - #define CONFIG_KM_DEF_ROOTPATH \ "rootpath=/opt/eldk/ppc_8xx\0" @@ -118,8 +115,8 @@ #define CONFIG_SYS_DDR_TIMING_3 0x00000000 -#define CONFIG_SYS_PIGGY_BASE 0xE8000000 -#define CONFIG_SYS_PIGGY_SIZE 128 +#define CONFIG_SYS_KMBEC_FPGA_BASE 0xE8000000 +#define CONFIG_SYS_KMBEC_FPGA_SIZE 128 /* EEprom support */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 diff --git a/include/configs/km83xx-common.h b/include/configs/km83xx-common.h index f2c0030..e8e23fd 100644 --- a/include/configs/km83xx-common.h +++ b/include/configs/km83xx-common.h @@ -121,13 +121,14 @@ /* * PRIO1/PIGGY on the local bus CS1 */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_PIGGY_BASE +/* Window base at flash base */ +#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_KMBEC_FPGA_BASE #define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000001A /* 128MB window size */ -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_PIGGY_BASE | \ +#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_KMBEC_FPGA_BASE | \ (1 << BR_PS_SHIFT) | /* 8 bit port size */ \ BR_V) -#define CONFIG_SYS_OR1_PRELIM (MEG_TO_AM(CONFIG_SYS_PIGGY_SIZE) | \ +#define CONFIG_SYS_OR1_PRELIM (MEG_TO_AM(CONFIG_SYS_KMBEC_FPGA_SIZE) | \ OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ OR_GPCM_SCY_2 | \ OR_GPCM_TRLX | OR_GPCM_EAD) @@ -212,7 +213,7 @@ #if defined(CONFIG_CMD_NAND) #define CONFIG_NAND_KMETER1 #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE CONFIG_SYS_PIGGY_BASE +#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE #endif #if defined(CONFIG_PCI) @@ -257,11 +258,11 @@ #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U /* PRIO1, PIGGY: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PIGGY_BASE | BATL_PP_10 | \ - BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PIGGY_BASE | BATU_BL_128M | \ - BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PIGGY_BASE | BATL_PP_10 | \ +#define CONFIG_SYS_IBAT2L (CONFIG_SYS_KMBEC_FPGA_BASE | BATL_PP_10 | \ + BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT2U (CONFIG_SYS_KMBEC_FPGA_BASE | BATU_BL_128M | \ + BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT2L (CONFIG_SYS_KMBEC_FPGA_BASE | BATL_PP_10 | \ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h index 041c73d..bc6742e 100644 --- a/include/configs/kmeter1.h +++ b/include/configs/kmeter1.h @@ -107,9 +107,11 @@ #define CONFIG_SYS_DDR_TIMING_3 0x00000000 -#define CONFIG_SYS_PIGGY_BASE 0xE8000000 -#define CONFIG_SYS_PIGGY_SIZE 128 -#define CONFIG_SYS_PAXE_BASE 0xA0000000 +/* PRIO FPGA */ +#define CONFIG_SYS_KMBEC_FPGA_BASE 0xE8000000 +#define CONFIG_SYS_KMBEC_FPGA_SIZE 128 +/* PAXE FPGA */ +#define CONFIG_SYS_PAXE_BASE 0xA0000000 #define CONFIG_SYS_PAXE_SIZE 512 /* EEprom support */ diff --git a/include/configs/suvd3.h b/include/configs/suvd3.h index 3552719..fddbddc 100644 --- a/include/configs/suvd3.h +++ b/include/configs/suvd3.h @@ -23,99 +23,15 @@ /* * High Level Configuration Options */ -#define CONFIG_QE 1 /* Has QE */ -#define CONFIG_MPC832x 1 /* MPC832x CPU specific */ #define CONFIG_SUVD3 1 /* SUVD3 board specific */ #define CONFIG_HOSTNAME suvd3 #define CONFIG_KM_BOARD_NAME "suvd3" #define CONFIG_SYS_TEXT_BASE 0xF0000000 -#define CONFIG_KM_DEF_NETDEV \ - "netdev=eth0\0" -#define CONFIG_KM_DEF_ROOTPATH \ - "rootpath=/opt/eldk/ppc_8xx\0" +/* include common defines/options for all 8321 Keymile boards */ +#include "km8321-common.h" -/* include common defines/options for all 83xx Keymile boards */ -#include "km83xx-common.h" - -#define CONFIG_MISC_INIT_R 1 - -/* - * System IO Config - */ -#define CONFIG_SYS_SICRH 0x00000006 -#define CONFIG_SYS_SICRL SICRL_IRQ_CKS - -/* - * Hardware Reset Configuration Word - */ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 | \ - HRCWL_DDR_TO_SCB_CLK_2X1 | \ - HRCWL_CSB_TO_CLKIN_2X1 | \ - HRCWL_CORE_TO_CSB_2_5X1 | \ - HRCWL_CE_PLL_VCO_DIV_2 | \ - HRCWL_CE_TO_PLL_1X3) - -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_AGENT | \ - HRCWH_PCI_ARBITER_DISABLE | \ - HRCWH_CORE_ENABLE | \ - HRCWH_FROM_0X00000100 | \ - HRCWH_BOOTSEQ_DISABLE | \ - HRCWH_SW_WATCHDOG_DISABLE | \ - HRCWH_ROM_LOC_LOCAL_16BIT | \ - HRCWH_BIG_ENDIAN | \ - HRCWH_LALE_NORMAL) - -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000007f -#define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SDRAM_TYPE_DDR2 | \ - SDRAM_CFG_32_BE | \ - SDRAM_CFG_SREN) -#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 -#define CONFIG_SYS_DDR_CLK_CNTL (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) -#define CONFIG_SYS_DDR_INTERVAL ((0x064 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \ - (0x200 << SDRAM_INTERVAL_REFINT_SHIFT)) - -#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \ - CSCONFIG_ODT_WR_CFG | \ - CSCONFIG_ROW_BIT_13 | \ - CSCONFIG_COL_BIT_10) - -#define CONFIG_SYS_DDR_MODE 0x47860252 -#define CONFIG_SYS_DDR_MODE2 0x8080c000 - -#define CONFIG_SYS_DDR_TIMING_0 ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \ - (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \ - (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \ - (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \ - (0 << TIMING_CFG0_WWT_SHIFT) | \ - (0 << TIMING_CFG0_RRT_SHIFT) | \ - (0 << TIMING_CFG0_WRT_SHIFT) | \ - (0 << TIMING_CFG0_RWT_SHIFT)) - -#define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_50) | \ - (2 << TIMING_CFG1_WRTORD_SHIFT) | \ - (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \ - (2 << TIMING_CFG1_WRREC_SHIFT) | \ - (6 << TIMING_CFG1_REFREC_SHIFT) | \ - (2 << TIMING_CFG1_ACTTORW_SHIFT) | \ - (6 << TIMING_CFG1_ACTTOPRE_SHIFT) | \ - (2 << TIMING_CFG1_PRETOACT_SHIFT)) - -#define CONFIG_SYS_DDR_TIMING_2 ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \ - (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \ - (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \ - (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \ - (4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \ - (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \ - (5 << TIMING_CFG2_CPO_SHIFT)) - -#define CONFIG_SYS_DDR_TIMING_3 0x00000000 - -#define CONFIG_SYS_PIGGY_BASE 0xE8000000 -#define CONFIG_SYS_PIGGY_SIZE 128 #define CONFIG_SYS_APP1_BASE 0xA0000000 #define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */ #define CONFIG_SYS_APP2_BASE 0xB0000000 @@ -125,12 +41,6 @@ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* - * Local Bus Configuration & Clock Setup - */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_EADC_1 | LCRR_CLKDIV_2) -#define CONFIG_SYS_LBC_LBCR 0x00000000 - -/* * Init Local Bus Memory Controller: * * Bank Bus Machine PortSz Size Device @@ -183,21 +93,6 @@ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U -#ifdef CONFIG_PCI -/* PCI MEM space: cacheable */ -#define CFG_IBAT6L (CFG_PCI1_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CFG_IBAT6U (CFG_PCI1_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) -#define CFG_DBAT6L CFG_IBAT6L -#define CFG_DBAT6U CFG_IBAT6U -/* PCI MMIO space: cache-inhibit and guarded */ -#define CFG_IBAT7L (CFG_PCI1_MMIO_PHYS | BATL_PP_10 | \ - BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CFG_IBAT7U (CFG_PCI1_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) -#define CFG_DBAT7L CFG_IBAT7L -#define CFG_DBAT7U CFG_IBAT7U -#else /* CONFIG_PCI */ - -/* APP2: icache cacheable, but dcache-inhibit and guarded */ #define CONFIG_SYS_IBAT6L (CONFIG_SYS_APP2_BASE | BATL_PP_10 | \ BATL_MEMCOHERENCE) #define CONFIG_SYS_IBAT6U (CONFIG_SYS_APP2_BASE | BATU_BL_256M | \ @@ -206,10 +101,4 @@ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U -#define CONFIG_SYS_IBAT7L (0) -#define CONFIG_SYS_IBAT7U (0) -#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U -#endif /* CONFIG_PCI */ - #endif /* __CONFIG_H */ diff --git a/include/configs/tuda1.h b/include/configs/tuda1.h index a50a87d..6b4c4cc 100644 --- a/include/configs/tuda1.h +++ b/include/configs/tuda1.h @@ -26,111 +26,20 @@ /* * High Level Configuration Options */ -#define CONFIG_QE /* Has QE */ -#define CONFIG_MPC832x /* MPC832x CPU specific */ #define CONFIG_TUDA1 /* TUDA1 board specific */ #define CONFIG_HOSTNAME tuda1 #define CONFIG_KM_BOARD_NAME "tuda1" #define CONFIG_SYS_TEXT_BASE 0xF0000000 -#define CONFIG_KM_DEF_NETDEV \ - "netdev=eth0\0" -#define CONFIG_KM_DEF_ROOTPATH \ - "rootpath=/opt/eldk/ppc_8xx\0" +/* include common defines/options for all 8321 Keymile boards */ +#include "km8321-common.h" -/* include common defines/options for all 83xx Keymile boards */ -#include "km83xx-common.h" - -#define CONFIG_MISC_INIT_R - -/* - * System IO Config - */ -#define CONFIG_SYS_SICRH 0x00000006 -#define CONFIG_SYS_SICRL SICRL_IRQ_CKS - -/* - * Hardware Reset Configuration Word - */ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 | \ - HRCWL_DDR_TO_SCB_CLK_2X1 | \ - HRCWL_CSB_TO_CLKIN_2X1 | \ - HRCWL_CORE_TO_CSB_2_5X1 | \ - HRCWL_CE_PLL_VCO_DIV_2 | \ - HRCWL_CE_TO_PLL_1X3) - -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_AGENT | \ - HRCWH_PCI_ARBITER_DISABLE | \ - HRCWH_CORE_ENABLE | \ - HRCWH_FROM_0X00000100 | \ - HRCWH_BOOTSEQ_DISABLE | \ - HRCWH_SW_WATCHDOG_DISABLE | \ - HRCWH_ROM_LOC_LOCAL_16BIT | \ - HRCWH_BIG_ENDIAN | \ - HRCWH_LALE_NORMAL) - -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000007f -#define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SDRAM_TYPE_DDR2 | \ - SDRAM_CFG_32_BE | \ - SDRAM_CFG_2T_EN | \ - SDRAM_CFG_SREN) - -#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 -#define CONFIG_SYS_DDR_CLK_CNTL (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) -#define CONFIG_SYS_DDR_INTERVAL ((0x064 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \ - (0x200 << SDRAM_INTERVAL_REFINT_SHIFT)) - -#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \ - CSCONFIG_ODT_WR_CFG | \ - CSCONFIG_ROW_BIT_13 | \ - CSCONFIG_COL_BIT_10) - -#define CONFIG_SYS_DDR_MODE 0x47860252 -#define CONFIG_SYS_DDR_MODE2 0x8080c000 - -#define CONFIG_SYS_DDR_TIMING_0 ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \ - (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \ - (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \ - (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \ - (0 << TIMING_CFG0_WWT_SHIFT) | \ - (0 << TIMING_CFG0_RRT_SHIFT) | \ - (0 << TIMING_CFG0_WRT_SHIFT) | \ - (0 << TIMING_CFG0_RWT_SHIFT)) - -#define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_50) | \ - (2 << TIMING_CFG1_WRTORD_SHIFT) | \ - (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \ - (2 << TIMING_CFG1_WRREC_SHIFT) | \ - (6 << TIMING_CFG1_REFREC_SHIFT) | \ - (2 << TIMING_CFG1_ACTTORW_SHIFT) | \ - (6 << TIMING_CFG1_ACTTOPRE_SHIFT) | \ - (2 << TIMING_CFG1_PRETOACT_SHIFT)) - -#define CONFIG_SYS_DDR_TIMING_2 ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \ - (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \ - (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \ - (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \ - (4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \ - (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \ - (5 << TIMING_CFG2_CPO_SHIFT)) - -#define CONFIG_SYS_DDR_TIMING_3 0x00000000 - - -#define CONFIG_SYS_PIGGY_BASE 0xE8000000 -#define CONFIG_SYS_PIGGY_SIZE 128 #define CONFIG_SYS_APP1_BASE 0xA0000000 /* PAXG */ #define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */ #define CONFIG_SYS_APP2_BASE 0xB0000000 /* PINC3 */ #define CONFIG_SYS_APP2_SIZE 256 /* Megabytes */ - -/* EEprom support */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 - /* * Local Bus Configuration & Clock Setup */ @@ -210,22 +119,6 @@ BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U -#ifdef CONFIG_PCI -/* PCI MEM space: cacheable */ -#define CFG_IBAT6L (CFG_PCI1_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CFG_IBAT6U (CFG_PCI1_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) -#define CFG_DBAT6L CFG_IBAT6L -#define CFG_DBAT6U CFG_IBAT6U -/* PCI MMIO space: cache-inhibit and guarded */ -#define CFG_IBAT7L (CFG_PCI1_MMIO_PHYS | \ - BATL_PP_10 | \ - BATL_CACHEINHIBIT | \ - BATL_GUARDEDSTORAGE) -#define CFG_IBAT7U (CFG_PCI1_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) -#define CFG_DBAT7L CFG_IBAT7L -#define CFG_DBAT7U CFG_IBAT7U -#else /* CONFIG_PCI */ - /* PINC3: icache cacheable, but dcache-inhibit and guarded */ #define CONFIG_SYS_IBAT6L (CONFIG_SYS_APP2_BASE | \ BATL_PP_10 | \ @@ -244,6 +137,5 @@ #define CONFIG_SYS_IBAT7U (0) #define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U -#endif /* CONFIG_PCI */ #endif /* __CONFIG_H */ diff --git a/include/configs/tuxa1.h b/include/configs/tuxa1.h index c4b48d1..724d92e 100644 --- a/include/configs/tuxa1.h +++ b/include/configs/tuxa1.h @@ -26,115 +26,20 @@ /* * High Level Configuration Options */ -#define CONFIG_QE /* Has QE */ -#define CONFIG_MPC832x /* MPC832x CPU specific */ #define CONFIG_TUXA1 /* TUXA1 board specific */ #define CONFIG_HOSTNAME tuxa1 #define CONFIG_KM_BOARD_NAME "tuxa1" #define CONFIG_SYS_TEXT_BASE 0xF0000000 -#define CONFIG_KM_DEF_NETDEV \ - "netdev=eth0\0" -#define CONFIG_KM_DEF_ROOTPATH \ - "rootpath=/opt/eldk/ppc_8xx\0" +/* include common defines/options for all 8321 Keymile boards */ +#include "km8321-common.h" -/* include common defines/options for all 83xx Keymile boards */ -#include "km83xx-common.h" - -#define CONFIG_MISC_INIT_R - -/* - * System IO Config - */ -#define CONFIG_SYS_SICRH 0x00000006 -#define CONFIG_SYS_SICRL SICRL_IRQ_CKS - -/* - * Hardware Reset Configuration Word - */ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 | \ - HRCWL_DDR_TO_SCB_CLK_2X1 | \ - HRCWL_CSB_TO_CLKIN_2X1 | \ - HRCWL_CORE_TO_CSB_2_5X1 | \ - HRCWL_CE_PLL_VCO_DIV_2 | \ - HRCWL_CE_TO_PLL_1X3) - -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_AGENT | \ - HRCWH_PCI_ARBITER_DISABLE | \ - HRCWH_CORE_ENABLE | \ - HRCWH_FROM_0X00000100 | \ - HRCWH_BOOTSEQ_DISABLE | \ - HRCWH_SW_WATCHDOG_DISABLE | \ - HRCWH_ROM_LOC_LOCAL_16BIT | \ - HRCWH_BIG_ENDIAN | \ - HRCWH_LALE_NORMAL) - -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000007f -#define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SDRAM_TYPE_DDR2 | \ - SDRAM_CFG_32_BE | \ - SDRAM_CFG_2T_EN | \ - SDRAM_CFG_SREN) -#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 -#define CONFIG_SYS_DDR_CLK_CNTL (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) -#define CONFIG_SYS_DDR_INTERVAL ((0x064 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \ - (0x200 << SDRAM_INTERVAL_REFINT_SHIFT)) - -#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \ - CSCONFIG_ODT_WR_CFG | \ - CSCONFIG_ROW_BIT_13 | \ - CSCONFIG_COL_BIT_10) - -#define CONFIG_SYS_DDR_MODE 0x47860252 -#define CONFIG_SYS_DDR_MODE2 0x8080c000 - -#define CONFIG_SYS_DDR_TIMING_0 ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \ - (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \ - (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \ - (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \ - (0 << TIMING_CFG0_WWT_SHIFT) | \ - (0 << TIMING_CFG0_RRT_SHIFT) | \ - (0 << TIMING_CFG0_WRT_SHIFT) | \ - (0 << TIMING_CFG0_RWT_SHIFT)) - -#define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_50) | \ - (2 << TIMING_CFG1_WRTORD_SHIFT) | \ - (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \ - (2 << TIMING_CFG1_WRREC_SHIFT) | \ - (6 << TIMING_CFG1_REFREC_SHIFT) | \ - (2 << TIMING_CFG1_ACTTORW_SHIFT) | \ - (6 << TIMING_CFG1_ACTTOPRE_SHIFT) | \ - (2 << TIMING_CFG1_PRETOACT_SHIFT)) - -#define CONFIG_SYS_DDR_TIMING_2 ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \ - (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \ - (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \ - (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \ - (4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \ - (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \ - (5 << TIMING_CFG2_CPO_SHIFT)) - -#define CONFIG_SYS_DDR_TIMING_3 0x00000000 - -#define CONFIG_SYS_PIGGY_BASE 0xE8000000 -#define CONFIG_SYS_PIGGY_SIZE 128 #define CONFIG_SYS_LPXF_BASE 0xA0000000 /* LPXF */ #define CONFIG_SYS_LPXF_SIZE 256 /* Megabytes */ #define CONFIG_SYS_PINC2_BASE 0xB0000000 /* PINC2 */ #define CONFIG_SYS_PINC2_SIZE 256 /* Megabytes */ - -/* EEprom support */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 - -/* - * Local Bus Configuration & Clock Setup - */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_EADC_1 | LCRR_CLKDIV_2) -#define CONFIG_SYS_LBC_LBCR 0x00000000 - /* * Init Local Bus Memory Controller: * @@ -202,20 +107,6 @@ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U -#ifdef CONFIG_PCI -/* PCI MEM space: cacheable */ -#define CFG_IBAT6L (CFG_PCI1_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CFG_IBAT6U (CFG_PCI1_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) -#define CFG_DBAT6L CFG_IBAT6L -#define CFG_DBAT6U CFG_IBAT6U -/* PCI MMIO space: cache-inhibit and guarded */ -#define CFG_IBAT7L (CFG_PCI1_MMIO_PHYS | BATL_PP_10 | \ - BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CFG_IBAT7U (CFG_PCI1_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) -#define CFG_DBAT7L CFG_IBAT7L -#define CFG_DBAT7U CFG_IBAT7U -#else /* CONFIG_PCI */ - /* PINC2: icache cacheable, but dcache-inhibit and guarded */ #define CONFIG_SYS_IBAT6L (CONFIG_SYS_PINC2_BASE | BATL_PP_10 | \ BATL_MEMCOHERENCE) @@ -229,6 +120,5 @@ #define CONFIG_SYS_IBAT7U (0) #define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U -#endif /* CONFIG_PCI */ #endif /* __CONFIG_H */ -- 1.7.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot