Currently clock providers may override default implementation of soc_clk_dump function to replace clk dump command output. This causes confusing behaviour when u-boot is built with one of such drivers enabled but still has clocks defined using CCF. For example, enabling CMD_CLK and using clk dump on sandbox target will not show CCF clocks because k210 driver overrides common soc_clk_dump.
Changelog: v1 -> v2: - Add missing static to dump functions v2 -> v3: - Make soc_clk_dump in cmd/clk.c static instead of removing __weak v3 -> v4: - Rebase and refactor dump for new Amlogic A1 clock controller driver v4 -> v5: - Add docs for dump() function in clk_ops - Print driver and device names before calling corresponding dump() Igor Prusov (8): clk: zynq: Move soc_clk_dump to Zynq clock driver clk: ast2600: Move soc_clk_dump function clk: k210: Move soc_clk_dump function clk: amlogic: Move driver and ops structs clk: Add dump operation to clk_ops cmd: clk: Use dump function from clk_ops clk: treewide: switch to clock dump from clk_ops cmd: clk: Make soc_clk_dump static arch/arm/mach-zynq/clk.c | 57 -------------- arch/mips/mach-pic32/cpu.c | 23 ------ cmd/clk.c | 13 +++- drivers/clk/aspeed/clk_ast2600.c | 83 ++++++++++---------- drivers/clk/clk_k210.c | 103 ++++++++++++------------- drivers/clk/clk_pic32.c | 39 ++++++++++ drivers/clk/clk_versal.c | 7 +- drivers/clk/clk_zynq.c | 51 ++++++++++++ drivers/clk/clk_zynqmp.c | 13 ++-- drivers/clk/imx/clk-imx8.c | 11 +-- drivers/clk/meson/a1.c | 54 +++++-------- drivers/clk/mvebu/armada-37xx-periph.c | 5 +- drivers/clk/stm32/clk-stm32mp1.c | 29 ++----- include/clk-uclass.h | 15 ++++ include/clk.h | 2 - 15 files changed, 256 insertions(+), 249 deletions(-) -- 2.34.1
