On 11/6/23 03:25, Sean Anderson wrote:
Several boards enable SPL_FS_FAT and SPL_LIBDISK_SUPPORT when they can't be
used (as there is no block device support enabled). Disable these configs.
The list of boards was generated with the following command:
$ tools/qconfig.py -f SPL SPL_FS_FAT ~SPL_MMC ~SPL_BLK_FS ~SPL_SATA \
~SPL_USB_STORAGE ~ENV_IS_IN_FAT ~EFI
LIBDISK was left enabled for the am* boards, since it seems to result in
actual size reduction, indicating that partitions are being used for
something.
Signed-off-by: Sean Anderson <sean...@gmail.com>
---
(no changes since v1)
configs/am335x_evm_spiboot_defconfig | 2 +-
configs/am65x_evm_r5_usbdfu_defconfig | 1 -
configs/xilinx_zynqmp_mini_qspi_defconfig | 3 +++
configs/zynq_cse_nand_defconfig | 3 +++
configs/zynq_cse_nor_defconfig | 3 +++
configs/zynq_cse_qspi_defconfig | 3 +++
6 files changed, 13 insertions(+), 2 deletions(-)
diff --git a/configs/am335x_evm_spiboot_defconfig
b/configs/am335x_evm_spiboot_defconfig
index b5b11fb62c8..fff5265e56a 100644
--- a/configs/am335x_evm_spiboot_defconfig
+++ b/configs/am335x_evm_spiboot_defconfig
@@ -13,6 +13,7 @@ CONFIG_CLOCK_SYNTHESIZER=y
# CONFIG_OF_LIBFDT_OVERLAY is not set
# CONFIG_SPL_MMC is not set
CONFIG_SPL=y
+# CONFIG_SPL_FS_FAT is not set
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_TIMESTAMP=y
@@ -27,7 +28,6 @@ CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
CONFIG_SPL_FIT_IMAGE_TINY=y
# CONFIG_SPL_FS_EXT4 is not set
-CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
CONFIG_SPL_MTD=y
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_SPL_DM_SPI_FLASH=y
diff --git a/configs/am65x_evm_r5_usbdfu_defconfig
b/configs/am65x_evm_r5_usbdfu_defconfig
index f610b2dd94e..6b0bb120d10 100644
--- a/configs/am65x_evm_r5_usbdfu_defconfig
+++ b/configs/am65x_evm_r5_usbdfu_defconfig
@@ -21,7 +21,6 @@ CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_SPL_SIZE_LIMIT=0x7ec00
CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x2000
-CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_LOAD_FIT=y
diff --git a/configs/xilinx_zynqmp_mini_qspi_defconfig
b/configs/xilinx_zynqmp_mini_qspi_defconfig
index a1adfb9e5d1..8b92e1c7358 100644
--- a/configs/xilinx_zynqmp_mini_qspi_defconfig
+++ b/configs/xilinx_zynqmp_mini_qspi_defconfig
@@ -11,6 +11,8 @@ CONFIG_ENV_SIZE=0x80
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-qspi"
CONFIG_SPL_STACK=0xfffffffc
CONFIG_SPL=y
+# CONFIG_SPL_FS_FAT is not set
+# CONFIG_SPL_LIBDISK_SUPPORT is not set
CONFIG_SYS_MEM_RSVD_FOR_MMU=y
CONFIG_ZYNQMP_NO_DDR=y
# CONFIG_PSCI_RESET is not set
@@ -89,6 +91,7 @@ CONFIG_SPI_FLASH_WINBOND=y
CONFIG_ARM_DCC=y
CONFIG_SPI=y
CONFIG_ZYNQMP_GQSPI=y
+CONFIG_FS_FAT=y
This can be also removed and also for zynq_cse boards below.
There is no need to have FAT support.
Thanks,
Michal
