Aneesh V wrote: > Hi Gilles, > > On Thursday 17 March 2011 06:13 PM, Gilles Chanteperdrix wrote: >> Hi, >> >> I would like to make some changes to u-boot on pandaboard. Sometimes in >> the past, in u-boot, I could "loadb" a new u-boot binary, then "go" to >> it, and the new version of u-boot would start. This was far from >> perfect, but it made testing small changes possible. This also works >> with the version of u-boot provided on the pandaboard community site. >> >> The magic which made this possible was in the "start.S" file, I see that >> the code changed, but there still seems to be a relocation (somewhat >> more complicated, since it handles ELF relocations), so it seems it >> should work. >> >> So my question is: is this "loadb+go" method still supposed to be >> working, and only broken, somehow, on pandaboard? Or is it no longer >> supposed to be working? > > Couple of things you might want to consider. > * According to the new relocation scheme u-boot should start running > from the address that it is linked to. You must load it to > CONFIG_SYS_TEXT_BASE > * Data cache enabled in U-Boot could be a problem. You will end up > having cache coherency issues unless you flush the caches after loadb. > Better keep them disabled using CONFIG_SYS_NO_DCACHE
It works like a charm. Thanks ! -- Gilles. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot