Dear Luca Ceresoli, In message <1300707767-15682-2-git-send-email-luca.ceres...@comelit.it> you wrote: > Board support for the Comelit Group SpA CPS board, which is a custom board > based on the BeagleBoard <http://beagleboard.org/> by Texas Instruments. > > The board support is based on the BeagleBoard implementation.
It appears you base this code on an old version of U-Boot. Please update your code base first. ALso make sure to run your patch to checkpatch before submitting: [PATCH] ARMV7: OMAP3: Add support for Comelit CPS board total: 4 errors, 325 warnings, 976 lines checked Please fix these! > --- /dev/null > +++ b/board/comelit/cps/config.mk ... > +CONFIG_SYS_TEXT_BASE = 0x80008000 We don't accept such config.mk files any more. Please move definition into your board config file. > + /* GPIO list > + - 159 OUT (GPIO5+31): reset for remote camera interface connector. > + - 19 OUT (GPIO1+19): integrated speaker amplifier (1=on, 0=shdn). > + - 20 OUT (GPIO1+20): handset amplifier (1=on, 0=shdn). > + */ Incorrect multiline comment style. ... > --- a/boards.cfg > +++ b/boards.cfg > @@ -117,6 +117,7 @@ omap3_pandora arm armv7 > pandora - > igep0020 arm armv7 igep0020 > isee omap3 > igep0030 arm armv7 igep0030 > isee omap3 > am3517_evm arm armv7 am3517evm > logicpd omap3 > +omap3_cps arm armv7 cps > comelit omap3 > omap3_zoom1 arm armv7 zoom1 > logicpd omap3 > omap3_zoom2 arm armv7 zoom2 > logicpd omap3 > omap3_beagle arm armv7 beagle ti > omap3 Please name your board just "cps" (or chose a better name). There shall be no SoC-prefix in the board names. > --- /dev/null > +++ b/include/configs/omap3_cps.h > @@ -0,0 +1,315 @@ ... > +#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ > +#define CONFIG_OMAP 1 /* in a TI OMAP core */ > +#define CONFIG_OMAP34XX 1 /* which is a 34XX */ > +#define CONFIG_OMAP3430 1 /* which is in a 3430 */ > +#define CONFIG_OMAP3_CPS 1 /* working with CPS board */ #defines like these which select a feature shall not have values assigned. Remove all these '1' here. Please fix globally. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de At the source of every error which is blamed on the computer you will find at least two human errors, including the error of blaming it on the computer. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot