On Tue, Nov 21, 2023 at 05:09:41PM +0000, Caleb Connolly wrote:
> Import the msm8916 devicetree from Linux and adjust the dragonboard410c
> devicetree to use it.
>
Can you add a note here from which Linux version you took the DT?
It seems quite old, the msm8916-pm8916.dtsi doesn't exist anymore
upstream since v6.5. Would be nice to bring it up to date (I don't have
any more cleanup planned at the moment, so the current state upstream
will probably stay mostly as-is).
>From a quick look I think U-Boot shouldn't be concerned much about the
changes, you might just need to do some trivial renames:
&msmgpio -> &tlmm
&blsp1_uart2 -> &blsp_uart2
Thanks a lot for working on this!
Stephan
> Signed-off-by: Caleb Connolly <caleb.conno...@linaro.org>
> ---
> arch/arm/dts/dragonboard410c-uboot.dtsi | 44 -
> arch/arm/dts/dragonboard410c.dts | 198 +-
> arch/arm/dts/msm8916-pins.dtsi | 582 ++++++
> arch/arm/dts/msm8916-pm8916.dtsi | 76 +
> arch/arm/dts/msm8916.dtsi | 2194
> +++++++++++++++++++++++
> arch/arm/dts/pm8916.dtsi | 183 ++
> include/dt-bindings/arm/coresight-cti-dt.h | 37 +
> include/dt-bindings/clock/qcom,rpmcc.h | 174 ++
> include/dt-bindings/interconnect/qcom,msm8916.h | 100 ++
> include/dt-bindings/reset/qcom,gcc-msm8916.h | 100 ++
> 10 files changed, 3484 insertions(+), 204 deletions(-)
>
> diff --git a/arch/arm/dts/dragonboard410c-uboot.dtsi
> b/arch/arm/dts/dragonboard410c-uboot.dtsi
> deleted file mode 100644
> index cec64bf80f99..000000000000
> --- a/arch/arm/dts/dragonboard410c-uboot.dtsi
> +++ /dev/null
> @@ -1,44 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0+
> -/*
> - * U-Boot addition to handle Dragonboard 410c pins
> - *
> - * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikow...@gmail.com>
> - */
> -
> -/ {
> -
> - smem {
> - bootph-all;
> - };
> -
> - soc {
> - bootph-all;
> -
> - pinctrl@1000000 {
> - bootph-all;
> -
> - uart {
> - bootph-all;
> - };
> - };
> -
> - qcom,gcc@1800000 {
> - bootph-all;
> - };
> -
> - serial@78b0000 {
> - bootph-all;
> - };
> - };
> -};
> -
> -
> -&pm8916_gpios {
> - usb_hub_reset_pm {
> - gpios = <&pm8916_gpios 2 0>;
> - };
> -
> - usb_sw_sel_pm {
> - gpios = <&pm8916_gpios 3 0>;
> - };
> -};
> diff --git a/arch/arm/dts/dragonboard410c.dts
> b/arch/arm/dts/dragonboard410c.dts
> index a42b68fee8c0..8933c64e56e5 100644
> --- a/arch/arm/dts/dragonboard410c.dts
> +++ b/arch/arm/dts/dragonboard410c.dts
> @@ -7,193 +7,40 @@
>
> /dts-v1/;
>
> -#include "skeleton64.dtsi"
> #include <dt-bindings/gpio/gpio.h>
>
> +#include "msm8916-pm8916.dtsi"
> +
> / {
> model = "Qualcomm Technologies, Inc. Dragonboard 410c";
> compatible = "qcom,apq8016-sbc", "qcom,apq8016";
> qcom,msm-id = <0xce 0x0 0xf8 0x0 0xf9 0x0 0xfa 0x0 0xf7 0x0>;
> qcom,board-id = <0x10018 0x0>;
> - #address-cells = <0x2>;
> - #size-cells = <0x2>;
>
> aliases {
> usb0 = "/soc/ehci@78d9000";
> + serial0 = &blsp1_uart2;
> };
>
> - memory {
> + memory@80000000 {
> device_type = "memory";
> reg = <0 0x80000000 0 0x3da00000>;
> };
>
> - reserved-memory {
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges;
> -
> - smem_mem: smem_region@86300000 {
> - reg = <0x0 0x86300000 0x0 0x100000>;
> - no-map;
> - };
> - };
> -
> chosen {
> stdout-path = "/soc/serial@78b0000";
> };
>
> - smem {
> - compatible = "qcom,smem";
> - memory-region = <&smem_mem>;
> - qcom,rpm-msg-ram = <&rpm_msg_ram>;
> - };
> -
> - soc {
> - #address-cells = <0x1>;
> - #size-cells = <0x1>;
> - ranges = <0x0 0x0 0x0 0xffffffff>;
> - compatible = "simple-bus";
> -
> - rpm_msg_ram: memory@60000 {
> - compatible = "qcom,rpm-msg-ram";
> - reg = <0x60000 0x8000>;
> - };
> -
> - soc_gpios: pinctrl@1000000 {
> - compatible = "qcom,msm8916-pinctrl";
> - reg = <0x1000000 0x400000>;
> - gpio-controller;
> - gpio-count = <122>;
> - gpio-bank-name="soc";
> - #gpio-cells = <2>;
> -
> - blsp1_uart: uart {
> - function = "blsp1_uart";
> - pins = "GPIO_4", "GPIO_5";
> - drive-strength = <8>;
> - bias-disable;
> - };
> - };
> - clkc: qcom,gcc@1800000 {
> - compatible = "qcom,gcc-msm8916";
> - reg = <0x1800000 0x80000>;
> - #address-cells = <0x1>;
> - #size-cells = <0x0>;
> - #clock-cells = <0x1>;
> - };
> -
> - serial@78b0000 {
> - compatible = "qcom,msm-uartdm-v1.4";
> - reg = <0x78b0000 0x200>;
> - clocks = <&clkc 4>;
> - clock-names = "core";
> - pinctrl-names = "uart";
> - pinctrl-0 = <&blsp1_uart>;
> - };
> -
> - ehci@78d9000 {
> - compatible = "qcom,ci-hdrc";
> - reg = <0x78d9000 0x400>;
> - phys = <&ehci_phy>;
> - };
> -
> - ehci_phy: ehci_phy@78d9000 {
> - compatible = "qcom,usb-hs-phy-msm8916";
> - reg = <0x78d9000 0x400>;
> - #phy-cells = <0>;
> - };
> -
> - sdhci@07824000 {
> - compatible = "qcom,sdhci-msm-v4";
> - reg = <0x7824900 0x11c 0x7824000 0x800>;
> - bus-width = <0x8>;
> - index = <0x0>;
> - non-removable;
> - clock = <&clkc 0>;
> - clock-frequency = <100000000>;
> - };
> -
> - sdhci@07864000 {
> - compatible = "qcom,sdhci-msm-v4";
> - reg = <0x7864900 0x11c 0x7864000 0x800>;
> - index = <0x1>;
> - bus-width = <0x4>;
> - clock = <&clkc 1>;
> - clock-frequency = <200000000>;
> - cd-gpios = <&soc_gpios 38 GPIO_ACTIVE_LOW>;
> - };
> -
> - wcnss {
> - bt {
> - compatible="qcom,wcnss-bt";
> - };
> -
> - wifi {
> - compatible="qcom,wcnss-wlan";
> - };
> - };
> -
> - spmi_bus: spmi@200f000 {
> - compatible = "qcom,spmi-pmic-arb";
> - reg = <0x0200f000 0x001000>,
> - <0x02400000 0x400000>,
> - <0x02c00000 0x400000>,
> - <0x03800000 0x200000>,
> - <0x0200a000 0x002100>;
> - reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
> - #address-cells = <0x1>;
> - #size-cells = <0x1>;
> - pmic0: pm8916@0 {
> - compatible = "qcom,spmi-pmic";
> - reg = <0x0 0x1>;
> - #address-cells = <0x1>;
> - #size-cells = <0x1>;
> -
> - pon@800 {
> - compatible = "qcom,pm8916-pon";
> - reg = <0x800 0x100>;
> - mode-bootloader = <0x2>;
> - mode-recovery = <0x1>;
> -
> - pwrkey {
> - compatible =
> "qcom,pm8941-pwrkey";
> - debounce = <15625>;
> - bias-pull-up;
> - };
> -
> - pm8916_resin: resin {
> - compatible =
> "qcom,pm8941-resin";
> - debounce = <15625>;
> - bias-pull-up;
> - };
> - };
> -
> - pm8916_gpios: pm8916_gpios@c000 {
> - compatible = "qcom,pm8916-gpio";
> - reg = <0xc000 0x400>;
> - gpio-controller;
> - gpio-ranges = <&pm8916_gpios 0 0 4>;
> - #gpio-cells = <2>;
> - };
> - };
> -
> - pmic1: pm8916@1 {
> - compatible = "qcom,spmi-pmic";
> - reg = <0x1 0x1>;
> - };
> - };
> - };
> -
> leds {
> compatible = "gpio-leds";
> user1 {
> label = "green:user1";
> - gpios = <&soc_gpios 21 0>;
> + gpios = <&msmgpio 21 0>;
> };
>
> user2 {
> label = "green:user2";
> - gpios = <&soc_gpios 120 0>;
> + gpios = <&msmgpio 120 0>;
> };
>
> user3 {
> @@ -208,4 +55,35 @@
> };
> };
>
> -#include "dragonboard410c-uboot.dtsi"
> +&blsp1_uart2 {
> + status = "okay";
> +};
> +
> +&pm8916_gpios {
> + usb_hub_reset_pm {
> + gpios = <&pm8916_gpios 2 0>;
> + };
> +
> + usb_sw_sel_pm {
> + gpios = <&pm8916_gpios 3 0>;
> + };
> +};
> +
> +&pm8916_resin {
> + status = "okay";
> +};
> +
> +&sdhc_1 {
> + status = "okay";
> + clock-frequency = <100000000>;
> +};
> +
> +&sdhc_2 {
> + status = "okay";
> + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
> + clock-frequency = <200000000>;
> +};
> +
> +&usb {
> + status = "okay";
> +};
> diff --git a/arch/arm/dts/msm8916-pins.dtsi b/arch/arm/dts/msm8916-pins.dtsi
> new file mode 100644
> index 000000000000..33dfcf318a81
> --- /dev/null
> +++ b/arch/arm/dts/msm8916-pins.dtsi
> @@ -0,0 +1,582 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
> + */
> +
> +&msmgpio {
> +
> + blsp1_uart1_default: blsp1-uart1-default-state {
> + /* TX, RX, CTS_N, RTS_N */
> + pins = "gpio0", "gpio1", "gpio2", "gpio3";
> + function = "blsp_uart1";
> +
> + drive-strength = <16>;
> + bias-disable;
> + };
> +
> + blsp1_uart1_sleep: blsp1-uart1-sleep-state {
> + pins = "gpio0", "gpio1", "gpio2", "gpio3";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-pull-down;
> + };
> +
> + blsp1_uart2_default: blsp1-uart2-default-state {
> + pins = "gpio4", "gpio5";
> + function = "blsp_uart2";
> +
> + drive-strength = <16>;
> + bias-disable;
> + };
> +
> + blsp1_uart2_sleep: blsp1-uart2-sleep-state {
> + pins = "gpio4", "gpio5";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-pull-down;
> + };
> +
> + spi1_default: spi1-default-state {
> + spi-pins {
> + pins = "gpio0", "gpio1", "gpio3";
> + function = "blsp_spi1";
> +
> + drive-strength = <12>;
> + bias-disable;
> + };
> + cs-pins {
> + pins = "gpio2";
> + function = "gpio";
> +
> + drive-strength = <16>;
> + bias-disable;
> + output-high;
> + };
> + };
> +
> + spi1_sleep: spi1-sleep-state {
> + pins = "gpio0", "gpio1", "gpio2", "gpio3";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-pull-down;
> + };
> +
> + spi2_default: spi2-default-state {
> + spi-pins {
> + pins = "gpio4", "gpio5", "gpio7";
> + function = "blsp_spi2";
> +
> + drive-strength = <12>;
> + bias-disable;
> + };
> + cs-pins {
> + pins = "gpio6";
> + function = "gpio";
> +
> + drive-strength = <16>;
> + bias-disable;
> + output-high;
> + };
> + };
> +
> + spi2_sleep: spi2-sleep-state {
> + pins = "gpio4", "gpio5", "gpio6", "gpio7";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-pull-down;
> + };
> +
> + spi3_default: spi3-default-state {
> + spi-pins {
> + pins = "gpio8", "gpio9", "gpio11";
> + function = "blsp_spi3";
> +
> + drive-strength = <12>;
> + bias-disable;
> + };
> + cs-pins {
> + pins = "gpio10";
> + function = "gpio";
> +
> + drive-strength = <16>;
> + bias-disable;
> + output-high;
> + };
> + };
> +
> + spi3_sleep: spi3-sleep-state {
> + pins = "gpio8", "gpio9", "gpio10", "gpio11";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-pull-down;
> + };
> +
> + spi4_default: spi4-default-state {
> + spi-pins {
> + pins = "gpio12", "gpio13", "gpio15";
> + function = "blsp_spi4";
> +
> + drive-strength = <12>;
> + bias-disable;
> + };
> + cs-pins {
> + pins = "gpio14";
> + function = "gpio";
> +
> + drive-strength = <16>;
> + bias-disable;
> + output-high;
> + };
> + };
> +
> + spi4_sleep: spi4-sleep-state {
> + pins = "gpio12", "gpio13", "gpio14", "gpio15";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-pull-down;
> + };
> +
> + spi5_default: spi5-default-state {
> + spi-pins {
> + pins = "gpio16", "gpio17", "gpio19";
> + function = "blsp_spi5";
> +
> + drive-strength = <12>;
> + bias-disable;
> + };
> + cs-pins {
> + pins = "gpio18";
> + function = "gpio";
> +
> + drive-strength = <16>;
> + bias-disable;
> + output-high;
> + };
> + };
> +
> + spi5_sleep: spi5-sleep-state {
> + pins = "gpio16", "gpio17", "gpio18", "gpio19";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-pull-down;
> + };
> +
> + spi6_default: spi6-default-state {
> + spi-pins {
> + pins = "gpio20", "gpio21", "gpio23";
> + function = "blsp_spi6";
> +
> + drive-strength = <12>;
> + bias-disable;
> + };
> + cs-pins {
> + pins = "gpio22";
> + function = "gpio";
> +
> + drive-strength = <16>;
> + bias-disable;
> + output-high;
> + };
> + };
> +
> + spi6_sleep: spi6-sleep-state {
> + pins = "gpio20", "gpio21", "gpio22", "gpio23";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-pull-down;
> + };
> +
> + i2c1_default: i2c1-default-state {
> + pins = "gpio2", "gpio3";
> + function = "blsp_i2c1";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + i2c1_sleep: i2c1-sleep-state {
> + pins = "gpio2", "gpio3";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + i2c2_default: i2c2-default-state {
> + pins = "gpio6", "gpio7";
> + function = "blsp_i2c2";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + i2c2_sleep: i2c2-sleep-state {
> + pins = "gpio6", "gpio7";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + i2c3_default: i2c3-default-state {
> + pins = "gpio10", "gpio11";
> + function = "blsp_i2c3";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + i2c3_sleep: i2c3-sleep-state {
> + pins = "gpio10", "gpio11";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + i2c4_default: i2c4-default-state {
> + pins = "gpio14", "gpio15";
> + function = "blsp_i2c4";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + i2c4_sleep: i2c4-sleep-state {
> + pins = "gpio14", "gpio15";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + i2c5_default: i2c5-default-state {
> + pins = "gpio18", "gpio19";
> + function = "blsp_i2c5";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + i2c5_sleep: i2c5-sleep-state {
> + pins = "gpio18", "gpio19";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + i2c6_default: i2c6-default-state {
> + pins = "gpio22", "gpio23";
> + function = "blsp_i2c6";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + i2c6_sleep: i2c6-sleep-state {
> + pins = "gpio22", "gpio23";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + pmx-sdc1-clk-state {
> + sdc1_clk_on: clk-on-pins {
> + pins = "sdc1_clk";
> +
> + bias-disable;
> + drive-strength = <16>;
> + };
> + sdc1_clk_off: clk-off-pins {
> + pins = "sdc1_clk";
> +
> + bias-disable;
> + drive-strength = <2>;
> + };
> + };
> +
> + pmx-sdc1-cmd-state {
> + sdc1_cmd_on: cmd-on-pins {
> + pins = "sdc1_cmd";
> +
> + bias-pull-up;
> + drive-strength = <10>;
> + };
> + sdc1_cmd_off: cmd-off-pins {
> + pins = "sdc1_cmd";
> +
> + bias-pull-up;
> + drive-strength = <2>;
> + };
> + };
> +
> + pmx-sdc1-data-state {
> + sdc1_data_on: data-on-pins {
> + pins = "sdc1_data";
> +
> + bias-pull-up;
> + drive-strength = <10>;
> + };
> + sdc1_data_off: data-off-pins {
> + pins = "sdc1_data";
> +
> + bias-pull-up;
> + drive-strength = <2>;
> + };
> + };
> +
> + pmx-sdc2-clk-state {
> + sdc2_clk_on: clk-on-pins {
> + pins = "sdc2_clk";
> +
> + bias-disable;
> + drive-strength = <16>;
> + };
> + sdc2_clk_off: clk-off-pins {
> + pins = "sdc2_clk";
> +
> + bias-disable;
> + drive-strength = <2>;
> + };
> + };
> +
> + pmx-sdc2-cmd-state {
> + sdc2_cmd_on: cmd-on-pins {
> + pins = "sdc2_cmd";
> +
> + bias-pull-up;
> + drive-strength = <10>;
> + };
> + sdc2_cmd_off: cmd-off-pins {
> + pins = "sdc2_cmd";
> +
> + bias-pull-up;
> + drive-strength = <2>;
> + };
> + };
> +
> + pmx-sdc2-data-state {
> + sdc2_data_on: data-on-pins {
> + pins = "sdc2_data";
> +
> + bias-pull-up;
> + drive-strength = <10>;
> + };
> + sdc2_data_off: data-off-pins {
> + pins = "sdc2_data";
> +
> + bias-pull-up;
> + drive-strength = <2>;
> + };
> + };
> +
> + pmx-sdc2-cd-pin-state {
> + sdc2_cd_on: cd-on-pins {
> + pins = "gpio38";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> + sdc2_cd_off: cd-off-pins {
> + pins = "gpio38";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> + };
> +
> + cdc-pdm-lines-state {
> + cdc_pdm_lines_act: pdm-lines-on-pins {
> + pins = "gpio63", "gpio64", "gpio65", "gpio66",
> + "gpio67", "gpio68";
> + function = "cdc_pdm0";
> +
> + drive-strength = <8>;
> + bias-disable;
> + };
> + cdc_pdm_lines_sus: pdm-lines-off-pins {
> + pins = "gpio63", "gpio64", "gpio65", "gpio66",
> + "gpio67", "gpio68";
> + function = "cdc_pdm0";
> +
> + drive-strength = <2>;
> + bias-pull-down;
> + };
> + };
> +
> + ext-pri-tlmm-lines-state {
> + ext_pri_tlmm_lines_act: ext-pa-on-pins {
> + pins = "gpio113", "gpio114", "gpio115", "gpio116";
> + function = "pri_mi2s";
> +
> + drive-strength = <8>;
> + bias-disable;
> + };
> + ext_pri_tlmm_lines_sus: ext-pa-off-pins {
> + pins = "gpio113", "gpio114", "gpio115", "gpio116";
> + function = "pri_mi2s";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> + };
> +
> + ext-pri-ws-line-state {
> + ext_pri_ws_act: ext-pa-on-pins {
> + pins = "gpio110";
> + function = "pri_mi2s_ws";
> +
> + drive-strength = <8>;
> + bias-disable;
> + };
> + ext_pri_ws_sus: ext-pa-off-pins {
> + pins = "gpio110";
> + function = "pri_mi2s_ws";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> + };
> +
> + ext-mclk-tlmm-lines-state {
> + ext_mclk_tlmm_lines_act: mclk-lines-on-pins {
> + pins = "gpio116";
> + function = "pri_mi2s";
> +
> + drive-strength = <8>;
> + bias-disable;
> + };
> + ext_mclk_tlmm_lines_sus: mclk-lines-off-pins {
> + pins = "gpio116";
> + function = "pri_mi2s";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> + };
> +
> + /* secondary Mi2S */
> + ext-sec-tlmm-lines-state {
> + ext_sec_tlmm_lines_act: tlmm-lines-on-pins {
> + pins = "gpio112", "gpio117", "gpio118", "gpio119";
> + function = "sec_mi2s";
> +
> + drive-strength = <8>;
> + bias-disable;
> + };
> + ext_sec_tlmm_lines_sus: tlmm-lines-off-pins {
> + pins = "gpio112", "gpio117", "gpio118", "gpio119";
> + function = "sec_mi2s";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> + };
> +
> + cdc_dmic_lines_act: cdc-dmic-lines-on-state {
> + clk-pins {
> + pins = "gpio0";
> + function = "dmic0_clk";
> +
> + drive-strength = <8>;
> + };
> + data-pins {
> + pins = "gpio1";
> + function = "dmic0_data";
> +
> + drive-strength = <8>;
> + };
> + };
> + cdc_dmic_lines_sus: cdc-dmic-lines-off-state {
> + clk-pins {
> + pins = "gpio0";
> + function = "dmic0_clk";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> + data-pins {
> + pins = "gpio1";
> + function = "dmic0_data";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> + };
> +
> + wcnss_pin_a: wcnss-active-state {
> + pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44";
> + function = "wcss_wlan";
> +
> + drive-strength = <6>;
> + bias-pull-up;
> + };
> +
> + cci0_default: cci0-default-state {
> + pins = "gpio29", "gpio30";
> + function = "cci_i2c";
> +
> + drive-strength = <16>;
> + bias-disable;
> + };
> +
> + camera_front_default: camera-front-default-state {
> + pwdn-pins {
> + pins = "gpio33";
> + function = "gpio";
> +
> + drive-strength = <16>;
> + bias-disable;
> + };
> + rst-pins {
> + pins = "gpio28";
> + function = "gpio";
> +
> + drive-strength = <16>;
> + bias-disable;
> + };
> + mclk1-pins {
> + pins = "gpio27";
> + function = "cam_mclk1";
> +
> + drive-strength = <16>;
> + bias-disable;
> + };
> + };
> +
> + camera_rear_default: camera-rear-default-state {
> + pwdn-pins {
> + pins = "gpio34";
> + function = "gpio";
> +
> + drive-strength = <16>;
> + bias-disable;
> + };
> + rst-pins {
> + pins = "gpio35";
> + function = "gpio";
> +
> + drive-strength = <16>;
> + bias-disable;
> + };
> + mclk0-pins {
> + pins = "gpio26";
> + function = "cam_mclk0";
> +
> + drive-strength = <16>;
> + bias-disable;
> + };
> + };
> +};
> diff --git a/arch/arm/dts/msm8916-pm8916.dtsi
> b/arch/arm/dts/msm8916-pm8916.dtsi
> new file mode 100644
> index 000000000000..6eb5e0a39510
> --- /dev/null
> +++ b/arch/arm/dts/msm8916-pm8916.dtsi
> @@ -0,0 +1,76 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +#include "msm8916.dtsi"
> +#include "pm8916.dtsi"
> +
> +&camss {
> + vdda-supply = <&pm8916_l2>;
> +};
> +
> +&dsi0 {
> + vdda-supply = <&pm8916_l2>;
> + vddio-supply = <&pm8916_l6>;
> +};
> +
> +&dsi_phy0 {
> + vddio-supply = <&pm8916_l6>;
> +};
> +
> +&mpss {
> + pll-supply = <&pm8916_l7>;
> +};
> +
> +&sdhc_1 {
> + vmmc-supply = <&pm8916_l8>;
> + vqmmc-supply = <&pm8916_l5>;
> +};
> +
> +&sdhc_2 {
> + vmmc-supply = <&pm8916_l11>;
> + vqmmc-supply = <&pm8916_l12>;
> +};
> +
> +&usb_hs_phy {
> + v1p8-supply = <&pm8916_l7>;
> + v3p3-supply = <&pm8916_l13>;
> +};
> +
> +&wcnss {
> + vddpx-supply = <&pm8916_l7>;
> +};
> +
> +&wcnss_iris {
> + vddxo-supply = <&pm8916_l7>;
> + vddrfa-supply = <&pm8916_s3>;
> + vddpa-supply = <&pm8916_l9>;
> + vdddig-supply = <&pm8916_l5>;
> +};
> +
> +&rpm_requests {
> + smd_rpm_regulators: regulators {
> + compatible = "qcom,rpm-pm8916-regulators";
> +
> + /* pm8916_s1 is managed by rpmpd (MSM8916_VDDCX) */
> + pm8916_s3: s3 {};
> + pm8916_s4: s4 {};
> +
> + pm8916_l1: l1 {};
> + pm8916_l2: l2 {};
> + /* pm8916_l3 is managed by rpmpd (MSM8916_VDDMX) */
> + pm8916_l4: l4 {};
> + pm8916_l5: l5 {};
> + pm8916_l6: l6 {};
> + pm8916_l7: l7 {};
> + pm8916_l8: l8 {};
> + pm8916_l9: l9 {};
> + pm8916_l10: l10 {};
> + pm8916_l11: l11 {};
> + pm8916_l12: l12 {};
> + pm8916_l13: l13 {};
> + pm8916_l14: l14 {};
> + pm8916_l15: l15 {};
> + pm8916_l16: l16 {};
> + pm8916_l17: l17 {};
> + pm8916_l18: l18 {};
> + };
> +};
> diff --git a/arch/arm/dts/msm8916.dtsi b/arch/arm/dts/msm8916.dtsi
> new file mode 100644
> index 000000000000..834e0b66b7f2
> --- /dev/null
> +++ b/arch/arm/dts/msm8916.dtsi
> @@ -0,0 +1,2194 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
> + */
> +
> +#include <dt-bindings/arm/coresight-cti-dt.h>
> +#include <dt-bindings/clock/qcom,gcc-msm8916.h>
> +#include <dt-bindings/clock/qcom,rpmcc.h>
> +#include <dt-bindings/interconnect/qcom,msm8916.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/power/qcom-rpmpd.h>
> +#include <dt-bindings/reset/qcom,gcc-msm8916.h>
> +#include <dt-bindings/thermal/thermal.h>
> +
> +/ {
> + interrupt-parent = <&intc>;
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + aliases {
> + mmc0 = &sdhc_1; /* SDC1 eMMC slot */
> + mmc1 = &sdhc_2; /* SDC2 SD card slot */
> + };
> +
> + chosen { };
> +
> + memory@80000000 {
> + device_type = "memory";
> + /* We expect the bootloader to fill in the reg */
> + reg = <0 0x80000000 0 0>;
> + };
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + tz-apps@86000000 {
> + reg = <0x0 0x86000000 0x0 0x300000>;
> + no-map;
> + };
> +
> + smem@86300000 {
> + compatible = "qcom,smem";
> + reg = <0x0 0x86300000 0x0 0x100000>;
> + no-map;
> +
> + hwlocks = <&tcsr_mutex 3>;
> + qcom,rpm-msg-ram = <&rpm_msg_ram>;
> + };
> +
> + hypervisor@86400000 {
> + reg = <0x0 0x86400000 0x0 0x100000>;
> + no-map;
> + };
> +
> + tz@86500000 {
> + reg = <0x0 0x86500000 0x0 0x180000>;
> + no-map;
> + };
> +
> + reserved@86680000 {
> + reg = <0x0 0x86680000 0x0 0x80000>;
> + no-map;
> + };
> +
> + rmtfs@86700000 {
> + compatible = "qcom,rmtfs-mem";
> + reg = <0x0 0x86700000 0x0 0xe0000>;
> + no-map;
> +
> + qcom,client-id = <1>;
> + };
> +
> + rfsa@867e0000 {
> + reg = <0x0 0x867e0000 0x0 0x20000>;
> + no-map;
> + };
> +
> + mpss_mem: mpss@86800000 {
> + reg = <0x0 0x86800000 0x0 0x2b00000>;
> + no-map;
> + };
> +
> + wcnss_mem: wcnss@89300000 {
> + reg = <0x0 0x89300000 0x0 0x600000>;
> + no-map;
> + };
> +
> + venus_mem: venus@89900000 {
> + reg = <0x0 0x89900000 0x0 0x600000>;
> + no-map;
> + };
> +
> + mba_mem: mba@8ea00000 {
> + no-map;
> + reg = <0 0x8ea00000 0 0x100000>;
> + };
> + };
> +
> + clocks {
> + xo_board: xo-board {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <19200000>;
> + };
> +
> + sleep_clk: sleep-clk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + };
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + CPU0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0>;
> + next-level-cache = <&L2_0>;
> + enable-method = "psci";
> + clocks = <&apcs>;
> + operating-points-v2 = <&cpu_opp_table>;
> + #cooling-cells = <2>;
> + power-domains = <&CPU_PD0>;
> + power-domain-names = "psci";
> + qcom,acc = <&cpu0_acc>;
> + qcom,saw = <&cpu0_saw>;
> + };
> +
> + CPU1: cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x1>;
> + next-level-cache = <&L2_0>;
> + enable-method = "psci";
> + clocks = <&apcs>;
> + operating-points-v2 = <&cpu_opp_table>;
> + #cooling-cells = <2>;
> + power-domains = <&CPU_PD1>;
> + power-domain-names = "psci";
> + qcom,acc = <&cpu1_acc>;
> + qcom,saw = <&cpu1_saw>;
> + };
> +
> + CPU2: cpu@2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x2>;
> + next-level-cache = <&L2_0>;
> + enable-method = "psci";
> + clocks = <&apcs>;
> + operating-points-v2 = <&cpu_opp_table>;
> + #cooling-cells = <2>;
> + power-domains = <&CPU_PD2>;
> + power-domain-names = "psci";
> + qcom,acc = <&cpu2_acc>;
> + qcom,saw = <&cpu2_saw>;
> + };
> +
> + CPU3: cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x3>;
> + next-level-cache = <&L2_0>;
> + enable-method = "psci";
> + clocks = <&apcs>;
> + operating-points-v2 = <&cpu_opp_table>;
> + #cooling-cells = <2>;
> + power-domains = <&CPU_PD3>;
> + power-domain-names = "psci";
> + qcom,acc = <&cpu3_acc>;
> + qcom,saw = <&cpu3_saw>;
> + };
> +
> + L2_0: l2-cache {
> + compatible = "cache";
> + cache-level = <2>;
> + cache-unified;
> + };
> +
> + idle-states {
> + entry-method = "psci";
> +
> + CPU_SLEEP_0: cpu-sleep-0 {
> + compatible = "arm,idle-state";
> + idle-state-name = "standalone-power-collapse";
> + arm,psci-suspend-param = <0x40000002>;
> + entry-latency-us = <130>;
> + exit-latency-us = <150>;
> + min-residency-us = <2000>;
> + local-timer-stop;
> + };
> + };
> +
> + domain-idle-states {
> +
> + CLUSTER_RET: cluster-retention {
> + compatible = "domain-idle-state";
> + arm,psci-suspend-param = <0x41000012>;
> + entry-latency-us = <500>;
> + exit-latency-us = <500>;
> + min-residency-us = <2000>;
> + };
> +
> + CLUSTER_PWRDN: cluster-gdhs {
> + compatible = "domain-idle-state";
> + arm,psci-suspend-param = <0x41000032>;
> + entry-latency-us = <2000>;
> + exit-latency-us = <2000>;
> + min-residency-us = <6000>;
> + };
> + };
> + };
> +
> + cpu_opp_table: opp-table-cpu {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp-200000000 {
> + opp-hz = /bits/ 64 <200000000>;
> + };
> + opp-400000000 {
> + opp-hz = /bits/ 64 <400000000>;
> + };
> + opp-800000000 {
> + opp-hz = /bits/ 64 <800000000>;
> + };
> + opp-998400000 {
> + opp-hz = /bits/ 64 <998400000>;
> + };
> + };
> +
> + firmware {
> + scm: scm {
> + compatible = "qcom,scm-msm8916", "qcom,scm";
> + clocks = <&gcc GCC_CRYPTO_CLK>,
> + <&gcc GCC_CRYPTO_AXI_CLK>,
> + <&gcc GCC_CRYPTO_AHB_CLK>;
> + clock-names = "core", "bus", "iface";
> + #reset-cells = <1>;
> +
> + qcom,dload-mode = <&tcsr 0x6100>;
> + };
> + };
> +
> + pmu {
> + compatible = "arm,cortex-a53-pmu";
> + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
> IRQ_TYPE_LEVEL_HIGH)>;
> + };
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> +
> + CPU_PD0: power-domain-cpu0 {
> + #power-domain-cells = <0>;
> + power-domains = <&CLUSTER_PD>;
> + domain-idle-states = <&CPU_SLEEP_0>;
> + };
> +
> + CPU_PD1: power-domain-cpu1 {
> + #power-domain-cells = <0>;
> + power-domains = <&CLUSTER_PD>;
> + domain-idle-states = <&CPU_SLEEP_0>;
> + };
> +
> + CPU_PD2: power-domain-cpu2 {
> + #power-domain-cells = <0>;
> + power-domains = <&CLUSTER_PD>;
> + domain-idle-states = <&CPU_SLEEP_0>;
> + };
> +
> + CPU_PD3: power-domain-cpu3 {
> + #power-domain-cells = <0>;
> + power-domains = <&CLUSTER_PD>;
> + domain-idle-states = <&CPU_SLEEP_0>;
> + };
> +
> + CLUSTER_PD: power-domain-cluster {
> + #power-domain-cells = <0>;
> + domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>;
> + };
> + };
> +
> + smd {
> + compatible = "qcom,smd";
> +
> + rpm {
> + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
> + qcom,ipc = <&apcs 8 0>;
> + qcom,smd-edge = <15>;
> +
> + rpm_requests: rpm-requests {
> + compatible = "qcom,rpm-msm8916";
> + qcom,smd-channels = "rpm_requests";
> +
> + rpmcc: clock-controller {
> + compatible = "qcom,rpmcc-msm8916",
> "qcom,rpmcc";
> + #clock-cells = <1>;
> + clocks = <&xo_board>;
> + clock-names = "xo";
> + };
> +
> + rpmpd: power-controller {
> + compatible = "qcom,msm8916-rpmpd";
> + #power-domain-cells = <1>;
> + operating-points-v2 =
> <&rpmpd_opp_table>;
> +
> + rpmpd_opp_table: opp-table {
> + compatible =
> "operating-points-v2";
> +
> + rpmpd_opp_ret: opp1 {
> + opp-level = <1>;
> + };
> + rpmpd_opp_svs_krait: opp2 {
> + opp-level = <2>;
> + };
> + rpmpd_opp_svs_soc: opp3 {
> + opp-level = <3>;
> + };
> + rpmpd_opp_nom: opp4 {
> + opp-level = <4>;
> + };
> + rpmpd_opp_turbo: opp5 {
> + opp-level = <5>;
> + };
> + rpmpd_opp_super_turbo: opp6 {
> + opp-level = <6>;
> + };
> + };
> + };
> + };
> + };
> + };
> +
> + smp2p-hexagon {
> + compatible = "qcom,smp2p";
> + qcom,smem = <435>, <428>;
> +
> + interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
> +
> + qcom,ipc = <&apcs 8 14>;
> +
> + qcom,local-pid = <0>;
> + qcom,remote-pid = <1>;
> +
> + hexagon_smp2p_out: master-kernel {
> + qcom,entry-name = "master-kernel";
> +
> + #qcom,smem-state-cells = <1>;
> + };
> +
> + hexagon_smp2p_in: slave-kernel {
> + qcom,entry-name = "slave-kernel";
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + smp2p-wcnss {
> + compatible = "qcom,smp2p";
> + qcom,smem = <451>, <431>;
> +
> + interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
> +
> + qcom,ipc = <&apcs 8 18>;
> +
> + qcom,local-pid = <0>;
> + qcom,remote-pid = <4>;
> +
> + wcnss_smp2p_out: master-kernel {
> + qcom,entry-name = "master-kernel";
> +
> + #qcom,smem-state-cells = <1>;
> + };
> +
> + wcnss_smp2p_in: slave-kernel {
> + qcom,entry-name = "slave-kernel";
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + smsm {
> + compatible = "qcom,smsm";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + qcom,ipc-1 = <&apcs 8 13>;
> + qcom,ipc-3 = <&apcs 8 19>;
> +
> + apps_smsm: apps@0 {
> + reg = <0>;
> +
> + #qcom,smem-state-cells = <1>;
> + };
> +
> + hexagon_smsm: hexagon@1 {
> + reg = <1>;
> + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + wcnss_smsm: wcnss@6 {
> + reg = <6>;
> + interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + soc: soc@0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0 0xffffffff>;
> + compatible = "simple-bus";
> +
> + rng@22000 {
> + compatible = "qcom,prng";
> + reg = <0x00022000 0x200>;
> + clocks = <&gcc GCC_PRNG_AHB_CLK>;
> + clock-names = "core";
> + };
> +
> + restart@4ab000 {
> + compatible = "qcom,pshold";
> + reg = <0x004ab000 0x4>;
> + };
> +
> + qfprom: qfprom@5c000 {
> + compatible = "qcom,msm8916-qfprom", "qcom,qfprom";
> + reg = <0x0005c000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + tsens_base1: base1@d0 {
> + reg = <0xd0 0x1>;
> + bits = <0 7>;
> + };
> +
> + tsens_s0_p1: s0-p1@d0 {
> + reg = <0xd0 0x2>;
> + bits = <7 5>;
> + };
> +
> + tsens_s0_p2: s0-p2@d1 {
> + reg = <0xd1 0x2>;
> + bits = <4 5>;
> + };
> +
> + tsens_s1_p1: s1-p1@d2 {
> + reg = <0xd2 0x1>;
> + bits = <1 5>;
> + };
> + tsens_s1_p2: s1-p2@d2 {
> + reg = <0xd2 0x2>;
> + bits = <6 5>;
> + };
> + tsens_s2_p1: s2-p1@d3 {
> + reg = <0xd3 0x1>;
> + bits = <3 5>;
> + };
> +
> + tsens_s2_p2: s2-p2@d4 {
> + reg = <0xd4 0x1>;
> + bits = <0 5>;
> + };
> +
> + // no tsens with hw_id 3
> +
> + tsens_s4_p1: s4-p1@d4 {
> + reg = <0xd4 0x2>;
> + bits = <5 5>;
> + };
> +
> + tsens_s4_p2: s4-p2@d5 {
> + reg = <0xd5 0x1>;
> + bits = <2 5>;
> + };
> +
> + tsens_s5_p1: s5-p1@d5 {
> + reg = <0xd5 0x2>;
> + bits = <7 5>;
> + };
> +
> + tsens_s5_p2: s5-p2@d6 {
> + reg = <0xd6 0x2>;
> + bits = <4 5>;
> + };
> +
> + tsens_base2: base2@d7 {
> + reg = <0xd7 0x1>;
> + bits = <1 7>;
> + };
> +
> + tsens_mode: mode@ef {
> + reg = <0xef 0x1>;
> + bits = <5 3>;
> + };
> + };
> +
> + rpm_msg_ram: sram@60000 {
> + compatible = "qcom,rpm-msg-ram";
> + reg = <0x00060000 0x8000>;
> + };
> +
> + sram@290000 {
> + compatible = "qcom,msm8916-rpm-stats";
> + reg = <0x00290000 0x10000>;
> + };
> +
> + bimc: interconnect@400000 {
> + compatible = "qcom,msm8916-bimc";
> + reg = <0x00400000 0x62000>;
> + #interconnect-cells = <1>;
> + clock-names = "bus", "bus_a";
> + clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
> + <&rpmcc RPM_SMD_BIMC_A_CLK>;
> + };
> +
> + tsens: thermal-sensor@4a9000 {
> + compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
> + reg = <0x004a9000 0x1000>, /* TM */
> + <0x004a8000 0x1000>; /* SROT */
> +
> + // no hw_id 3
> + nvmem-cells = <&tsens_mode>,
> + <&tsens_base1>, <&tsens_base2>,
> + <&tsens_s0_p1>, <&tsens_s0_p2>,
> + <&tsens_s1_p1>, <&tsens_s1_p2>,
> + <&tsens_s2_p1>, <&tsens_s2_p2>,
> + <&tsens_s4_p1>, <&tsens_s4_p2>,
> + <&tsens_s5_p1>, <&tsens_s5_p2>;
> + nvmem-cell-names = "mode",
> + "base1", "base2",
> + "s0_p1", "s0_p2",
> + "s1_p1", "s1_p2",
> + "s2_p1", "s2_p2",
> + "s4_p1", "s4_p2",
> + "s5_p1", "s5_p2";
> + #qcom,sensors = <5>;
> + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "uplow";
> + #thermal-sensor-cells = <1>;
> + };
> +
> + pcnoc: interconnect@500000 {
> + compatible = "qcom,msm8916-pcnoc";
> + reg = <0x00500000 0x11000>;
> + #interconnect-cells = <1>;
> + clock-names = "bus", "bus_a";
> + clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
> + <&rpmcc RPM_SMD_PCNOC_A_CLK>;
> + };
> +
> + snoc: interconnect@580000 {
> + compatible = "qcom,msm8916-snoc";
> + reg = <0x00580000 0x14000>;
> + #interconnect-cells = <1>;
> + clock-names = "bus", "bus_a";
> + clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
> + <&rpmcc RPM_SMD_SNOC_A_CLK>;
> + };
> +
> + stm: stm@802000 {
> + compatible = "arm,coresight-stm", "arm,primecell";
> + reg = <0x00802000 0x1000>,
> + <0x09280000 0x180000>;
> + reg-names = "stm-base", "stm-stimulus-base";
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + status = "disabled";
> +
> + out-ports {
> + port {
> + stm_out: endpoint {
> + remote-endpoint =
> <&funnel0_in7>;
> + };
> + };
> + };
> + };
> +
> + /* System CTIs */
> + /* CTI 0 - TMC connections */
> + cti0: cti@810000 {
> + compatible = "arm,coresight-cti", "arm,primecell";
> + reg = <0x00810000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + status = "disabled";
> + };
> +
> + /* CTI 1 - TPIU connections */
> + cti1: cti@811000 {
> + compatible = "arm,coresight-cti", "arm,primecell";
> + reg = <0x00811000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + status = "disabled";
> + };
> +
> + /* CTIs 2-11 - no information - not instantiated */
> +
> + tpiu: tpiu@820000 {
> + compatible = "arm,coresight-tpiu", "arm,primecell";
> + reg = <0x00820000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + status = "disabled";
> +
> + in-ports {
> + port {
> + tpiu_in: endpoint {
> + remote-endpoint =
> <&replicator_out1>;
> + };
> + };
> + };
> + };
> +
> + funnel0: funnel@821000 {
> + compatible = "arm,coresight-dynamic-funnel",
> "arm,primecell";
> + reg = <0x00821000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + status = "disabled";
> +
> + in-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /*
> + * Not described input ports:
> + * 0 - connected to Resource and Power Manger
> CPU ETM
> + * 1 - not-connected
> + * 2 - connected to Modem CPU ETM
> + * 3 - not-connected
> + * 5 - not-connected
> + * 6 - connected trought funnel to Wireless CPU
> ETM
> + * 7 - connected to STM component
> + */
> +
> + port@4 {
> + reg = <4>;
> + funnel0_in4: endpoint {
> + remote-endpoint =
> <&funnel1_out>;
> + };
> + };
> +
> + port@7 {
> + reg = <7>;
> + funnel0_in7: endpoint {
> + remote-endpoint = <&stm_out>;
> + };
> + };
> + };
> +
> + out-ports {
> + port {
> + funnel0_out: endpoint {
> + remote-endpoint = <&etf_in>;
> + };
> + };
> + };
> + };
> +
> + replicator: replicator@824000 {
> + compatible = "arm,coresight-dynamic-replicator",
> "arm,primecell";
> + reg = <0x00824000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + status = "disabled";
> +
> + out-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + replicator_out0: endpoint {
> + remote-endpoint = <&etr_in>;
> + };
> + };
> + port@1 {
> + reg = <1>;
> + replicator_out1: endpoint {
> + remote-endpoint = <&tpiu_in>;
> + };
> + };
> + };
> +
> + in-ports {
> + port {
> + replicator_in: endpoint {
> + remote-endpoint = <&etf_out>;
> + };
> + };
> + };
> + };
> +
> + etf: etf@825000 {
> + compatible = "arm,coresight-tmc", "arm,primecell";
> + reg = <0x00825000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + status = "disabled";
> +
> + in-ports {
> + port {
> + etf_in: endpoint {
> + remote-endpoint =
> <&funnel0_out>;
> + };
> + };
> + };
> +
> + out-ports {
> + port {
> + etf_out: endpoint {
> + remote-endpoint =
> <&replicator_in>;
> + };
> + };
> + };
> + };
> +
> + etr: etr@826000 {
> + compatible = "arm,coresight-tmc", "arm,primecell";
> + reg = <0x00826000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + status = "disabled";
> +
> + in-ports {
> + port {
> + etr_in: endpoint {
> + remote-endpoint =
> <&replicator_out0>;
> + };
> + };
> + };
> + };
> +
> + funnel1: funnel@841000 { /* APSS funnel only 4 inputs
> are used */
> + compatible = "arm,coresight-dynamic-funnel",
> "arm,primecell";
> + reg = <0x00841000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + status = "disabled";
> +
> + in-ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + funnel1_in0: endpoint {
> + remote-endpoint = <&etm0_out>;
> + };
> + };
> + port@1 {
> + reg = <1>;
> + funnel1_in1: endpoint {
> + remote-endpoint = <&etm1_out>;
> + };
> + };
> + port@2 {
> + reg = <2>;
> + funnel1_in2: endpoint {
> + remote-endpoint = <&etm2_out>;
> + };
> + };
> + port@3 {
> + reg = <3>;
> + funnel1_in3: endpoint {
> + remote-endpoint = <&etm3_out>;
> + };
> + };
> + };
> +
> + out-ports {
> + port {
> + funnel1_out: endpoint {
> + remote-endpoint =
> <&funnel0_in4>;
> + };
> + };
> + };
> + };
> +
> + debug0: debug@850000 {
> + compatible = "arm,coresight-cpu-debug", "arm,primecell";
> + reg = <0x00850000 0x1000>;
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> + cpu = <&CPU0>;
> + status = "disabled";
> + };
> +
> + debug1: debug@852000 {
> + compatible = "arm,coresight-cpu-debug", "arm,primecell";
> + reg = <0x00852000 0x1000>;
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> + cpu = <&CPU1>;
> + status = "disabled";
> + };
> +
> + debug2: debug@854000 {
> + compatible = "arm,coresight-cpu-debug", "arm,primecell";
> + reg = <0x00854000 0x1000>;
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> + cpu = <&CPU2>;
> + status = "disabled";
> + };
> +
> + debug3: debug@856000 {
> + compatible = "arm,coresight-cpu-debug", "arm,primecell";
> + reg = <0x00856000 0x1000>;
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> + cpu = <&CPU3>;
> + status = "disabled";
> + };
> +
> + /* Core CTIs; CTIs 12-15 */
> + /* CTI - CPU-0 */
> + cti12: cti@858000 {
> + compatible = "arm,coresight-cti-v8-arch",
> "arm,coresight-cti",
> + "arm,primecell";
> + reg = <0x00858000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + cpu = <&CPU0>;
> + arm,cs-dev-assoc = <&etm0>;
> +
> + status = "disabled";
> + };
> +
> + /* CTI - CPU-1 */
> + cti13: cti@859000 {
> + compatible = "arm,coresight-cti-v8-arch",
> "arm,coresight-cti",
> + "arm,primecell";
> + reg = <0x00859000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + cpu = <&CPU1>;
> + arm,cs-dev-assoc = <&etm1>;
> +
> + status = "disabled";
> + };
> +
> + /* CTI - CPU-2 */
> + cti14: cti@85a000 {
> + compatible = "arm,coresight-cti-v8-arch",
> "arm,coresight-cti",
> + "arm,primecell";
> + reg = <0x0085a000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + cpu = <&CPU2>;
> + arm,cs-dev-assoc = <&etm2>;
> +
> + status = "disabled";
> + };
> +
> + /* CTI - CPU-3 */
> + cti15: cti@85b000 {
> + compatible = "arm,coresight-cti-v8-arch",
> "arm,coresight-cti",
> + "arm,primecell";
> + reg = <0x0085b000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>;
> + clock-names = "apb_pclk";
> +
> + cpu = <&CPU3>;
> + arm,cs-dev-assoc = <&etm3>;
> +
> + status = "disabled";
> + };
> +
> + etm0: etm@85c000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0x0085c000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> + arm,coresight-loses-context-with-cpu;
> +
> + cpu = <&CPU0>;
> +
> + status = "disabled";
> +
> + out-ports {
> + port {
> + etm0_out: endpoint {
> + remote-endpoint =
> <&funnel1_in0>;
> + };
> + };
> + };
> + };
> +
> + etm1: etm@85d000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0x0085d000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> + arm,coresight-loses-context-with-cpu;
> +
> + cpu = <&CPU1>;
> +
> + status = "disabled";
> +
> + out-ports {
> + port {
> + etm1_out: endpoint {
> + remote-endpoint =
> <&funnel1_in1>;
> + };
> + };
> + };
> + };
> +
> + etm2: etm@85e000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0x0085e000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> + arm,coresight-loses-context-with-cpu;
> +
> + cpu = <&CPU2>;
> +
> + status = "disabled";
> +
> + out-ports {
> + port {
> + etm2_out: endpoint {
> + remote-endpoint =
> <&funnel1_in2>;
> + };
> + };
> + };
> + };
> +
> + etm3: etm@85f000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0x0085f000 0x1000>;
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> + arm,coresight-loses-context-with-cpu;
> +
> + cpu = <&CPU3>;
> +
> + status = "disabled";
> +
> + out-ports {
> + port {
> + etm3_out: endpoint {
> + remote-endpoint =
> <&funnel1_in3>;
> + };
> + };
> + };
> + };
> +
> + msmgpio: pinctrl@1000000 {
> + compatible = "qcom,msm8916-pinctrl";
> + reg = <0x01000000 0x300000>;
> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + gpio-ranges = <&msmgpio 0 0 122>;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gcc: clock-controller@1800000 {
> + compatible = "qcom,gcc-msm8916";
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + #power-domain-cells = <1>;
> + reg = <0x01800000 0x80000>;
> + clocks = <&xo_board>,
> + <&sleep_clk>,
> + <&dsi_phy0 1>,
> + <&dsi_phy0 0>,
> + <0>,
> + <0>,
> + <0>;
> + clock-names = "xo",
> + "sleep_clk",
> + "dsi0pll",
> + "dsi0pllbyte",
> + "ext_mclk",
> + "ext_pri_i2s",
> + "ext_sec_i2s";
> + };
> +
> + tcsr_mutex: hwlock@1905000 {
> + compatible = "qcom,tcsr-mutex";
> + reg = <0x01905000 0x20000>;
> + #hwlock-cells = <1>;
> + };
> +
> + tcsr: syscon@1937000 {
> + compatible = "qcom,tcsr-msm8916", "syscon";
> + reg = <0x01937000 0x30000>;
> + };
> +
> + mdss: display-subsystem@1a00000 {
> + status = "disabled";
> + compatible = "qcom,mdss";
> + reg = <0x01a00000 0x1000>,
> + <0x01ac8000 0x3000>;
> + reg-names = "mdss_phys", "vbif_phys";
> +
> + power-domains = <&gcc MDSS_GDSC>;
> +
> + clocks = <&gcc GCC_MDSS_AHB_CLK>,
> + <&gcc GCC_MDSS_AXI_CLK>,
> + <&gcc GCC_MDSS_VSYNC_CLK>;
> + clock-names = "iface",
> + "bus",
> + "vsync";
> +
> + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
> +
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + mdp: display-controller@1a01000 {
> + compatible = "qcom,msm8916-mdp5", "qcom,mdp5";
> + reg = <0x01a01000 0x89000>;
> + reg-names = "mdp_phys";
> +
> + interrupt-parent = <&mdss>;
> + interrupts = <0>;
> +
> + clocks = <&gcc GCC_MDSS_AHB_CLK>,
> + <&gcc GCC_MDSS_AXI_CLK>,
> + <&gcc GCC_MDSS_MDP_CLK>,
> + <&gcc GCC_MDSS_VSYNC_CLK>;
> + clock-names = "iface",
> + "bus",
> + "core",
> + "vsync";
> +
> + iommus = <&apps_iommu 4>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + mdp5_intf1_out: endpoint {
> + remote-endpoint =
> <&dsi0_in>;
> + };
> + };
> + };
> + };
> +
> + dsi0: dsi@1a98000 {
> + compatible = "qcom,msm8916-dsi-ctrl",
> + "qcom,mdss-dsi-ctrl";
> + reg = <0x01a98000 0x25c>;
> + reg-names = "dsi_ctrl";
> +
> + interrupt-parent = <&mdss>;
> + interrupts = <4>;
> +
> + assigned-clocks = <&gcc BYTE0_CLK_SRC>,
> + <&gcc PCLK0_CLK_SRC>;
> + assigned-clock-parents = <&dsi_phy0 0>,
> + <&dsi_phy0 1>;
> +
> + clocks = <&gcc GCC_MDSS_MDP_CLK>,
> + <&gcc GCC_MDSS_AHB_CLK>,
> + <&gcc GCC_MDSS_AXI_CLK>,
> + <&gcc GCC_MDSS_BYTE0_CLK>,
> + <&gcc GCC_MDSS_PCLK0_CLK>,
> + <&gcc GCC_MDSS_ESC0_CLK>;
> + clock-names = "mdp_core",
> + "iface",
> + "bus",
> + "byte",
> + "pixel",
> + "core";
> + phys = <&dsi_phy0>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + dsi0_in: endpoint {
> + remote-endpoint =
> <&mdp5_intf1_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + dsi0_out: endpoint {
> + };
> + };
> + };
> + };
> +
> + dsi_phy0: phy@1a98300 {
> + compatible = "qcom,dsi-phy-28nm-lp";
> + reg = <0x01a98300 0xd4>,
> + <0x01a98500 0x280>,
> + <0x01a98780 0x30>;
> + reg-names = "dsi_pll",
> + "dsi_phy",
> + "dsi_phy_regulator";
> +
> + #clock-cells = <1>;
> + #phy-cells = <0>;
> +
> + clocks = <&gcc GCC_MDSS_AHB_CLK>,
> + <&xo_board>;
> + clock-names = "iface", "ref";
> + };
> + };
> +
> + camss: camss@1b00000 {
> + compatible = "qcom,msm8916-camss";
> + reg = <0x01b0ac00 0x200>,
> + <0x01b00030 0x4>,
> + <0x01b0b000 0x200>,
> + <0x01b00038 0x4>,
> + <0x01b08000 0x100>,
> + <0x01b08400 0x100>,
> + <0x01b0a000 0x500>,
> + <0x01b00020 0x10>,
> + <0x01b10000 0x1000>;
> + reg-names = "csiphy0",
> + "csiphy0_clk_mux",
> + "csiphy1",
> + "csiphy1_clk_mux",
> + "csid0",
> + "csid1",
> + "ispif",
> + "csi_clk_mux",
> + "vfe0";
> + interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "csiphy0",
> + "csiphy1",
> + "csid0",
> + "csid1",
> + "ispif",
> + "vfe0";
> + power-domains = <&gcc VFE_GDSC>;
> + clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
> + <&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
> + <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
> + <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
> + <&gcc GCC_CAMSS_CSI0_AHB_CLK>,
> + <&gcc GCC_CAMSS_CSI0_CLK>,
> + <&gcc GCC_CAMSS_CSI0PHY_CLK>,
> + <&gcc GCC_CAMSS_CSI0PIX_CLK>,
> + <&gcc GCC_CAMSS_CSI0RDI_CLK>,
> + <&gcc GCC_CAMSS_CSI1_AHB_CLK>,
> + <&gcc GCC_CAMSS_CSI1_CLK>,
> + <&gcc GCC_CAMSS_CSI1PHY_CLK>,
> + <&gcc GCC_CAMSS_CSI1PIX_CLK>,
> + <&gcc GCC_CAMSS_CSI1RDI_CLK>,
> + <&gcc GCC_CAMSS_AHB_CLK>,
> + <&gcc GCC_CAMSS_VFE0_CLK>,
> + <&gcc GCC_CAMSS_CSI_VFE0_CLK>,
> + <&gcc GCC_CAMSS_VFE_AHB_CLK>,
> + <&gcc GCC_CAMSS_VFE_AXI_CLK>;
> + clock-names = "top_ahb",
> + "ispif_ahb",
> + "csiphy0_timer",
> + "csiphy1_timer",
> + "csi0_ahb",
> + "csi0",
> + "csi0_phy",
> + "csi0_pix",
> + "csi0_rdi",
> + "csi1_ahb",
> + "csi1",
> + "csi1_phy",
> + "csi1_pix",
> + "csi1_rdi",
> + "ahb",
> + "vfe0",
> + "csi_vfe0",
> + "vfe_ahb",
> + "vfe_axi";
> + iommus = <&apps_iommu 3>;
> + status = "disabled";
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> +
> + cci: cci@1b0c000 {
> + compatible = "qcom,msm8916-cci", "qcom,msm8226-cci";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x01b0c000 0x1000>;
> + interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
> + clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
> + <&gcc GCC_CAMSS_CCI_AHB_CLK>,
> + <&gcc GCC_CAMSS_CCI_CLK>,
> + <&gcc GCC_CAMSS_AHB_CLK>;
> + clock-names = "camss_top_ahb", "cci_ahb",
> + "cci", "camss_ahb";
> + assigned-clocks = <&gcc GCC_CAMSS_CCI_AHB_CLK>,
> + <&gcc GCC_CAMSS_CCI_CLK>;
> + assigned-clock-rates = <80000000>, <19200000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&cci0_default>;
> + status = "disabled";
> +
> + cci_i2c0: i2c-bus@0 {
> + reg = <0>;
> + clock-frequency = <400000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> +
> + gpu@1c00000 {
> + compatible = "qcom,adreno-306.0", "qcom,adreno";
> + reg = <0x01c00000 0x20000>;
> + reg-names = "kgsl_3d0_reg_memory";
> + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "kgsl_3d0_irq";
> + clock-names =
> + "core",
> + "iface",
> + "mem",
> + "mem_iface",
> + "alt_mem_iface",
> + "gfx3d";
> + clocks =
> + <&gcc GCC_OXILI_GFX3D_CLK>,
> + <&gcc GCC_OXILI_AHB_CLK>,
> + <&gcc GCC_OXILI_GMEM_CLK>,
> + <&gcc GCC_BIMC_GFX_CLK>,
> + <&gcc GCC_BIMC_GPU_CLK>,
> + <&gcc GFX3D_CLK_SRC>;
> + power-domains = <&gcc OXILI_GDSC>;
> + operating-points-v2 = <&gpu_opp_table>;
> + iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
> +
> + gpu_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-400000000 {
> + opp-hz = /bits/ 64 <400000000>;
> + };
> + opp-19200000 {
> + opp-hz = /bits/ 64 <19200000>;
> + };
> + };
> + };
> +
> + venus: video-codec@1d00000 {
> + compatible = "qcom,msm8916-venus";
> + reg = <0x01d00000 0xff000>;
> + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> + power-domains = <&gcc VENUS_GDSC>;
> + clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
> + <&gcc GCC_VENUS0_AHB_CLK>,
> + <&gcc GCC_VENUS0_AXI_CLK>;
> + clock-names = "core", "iface", "bus";
> + iommus = <&apps_iommu 5>;
> + memory-region = <&venus_mem>;
> + status = "okay";
> +
> + video-decoder {
> + compatible = "venus-decoder";
> + };
> +
> + video-encoder {
> + compatible = "venus-encoder";
> + };
> + };
> +
> + apps_iommu: iommu@1ef0000 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + #iommu-cells = <1>;
> + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
> + ranges = <0 0x01e20000 0x40000>;
> + reg = <0x01ef0000 0x3000>;
> + clocks = <&gcc GCC_SMMU_CFG_CLK>,
> + <&gcc GCC_APSS_TCU_CLK>;
> + clock-names = "iface", "bus";
> + qcom,iommu-secure-id = <17>;
> +
> + /* VFE */
> + iommu-ctx@3000 {
> + compatible = "qcom,msm-iommu-v1-sec";
> + reg = <0x3000 0x1000>;
> + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + /* MDP_0 */
> + iommu-ctx@4000 {
> + compatible = "qcom,msm-iommu-v1-ns";
> + reg = <0x4000 0x1000>;
> + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + /* VENUS_NS */
> + iommu-ctx@5000 {
> + compatible = "qcom,msm-iommu-v1-sec";
> + reg = <0x5000 0x1000>;
> + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> +
> + gpu_iommu: iommu@1f08000 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + #iommu-cells = <1>;
> + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
> + ranges = <0 0x01f08000 0x10000>;
> + clocks = <&gcc GCC_SMMU_CFG_CLK>,
> + <&gcc GCC_GFX_TCU_CLK>;
> + clock-names = "iface", "bus";
> + qcom,iommu-secure-id = <18>;
> +
> + /* GFX3D_USER */
> + iommu-ctx@1000 {
> + compatible = "qcom,msm-iommu-v1-ns";
> + reg = <0x1000 0x1000>;
> + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + /* GFX3D_PRIV */
> + iommu-ctx@2000 {
> + compatible = "qcom,msm-iommu-v1-ns";
> + reg = <0x2000 0x1000>;
> + interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> +
> + spmi_bus: spmi@200f000 {
> + compatible = "qcom,spmi-pmic-arb";
> + reg = <0x0200f000 0x001000>,
> + <0x02400000 0x400000>,
> + <0x02c00000 0x400000>,
> + <0x03800000 0x200000>,
> + <0x0200a000 0x002100>;
> + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
> + interrupt-names = "periph_irq";
> + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
> + qcom,ee = <0>;
> + qcom,channel = <0>;
> + #address-cells = <2>;
> + #size-cells = <0>;
> + interrupt-controller;
> + #interrupt-cells = <4>;
> + };
> +
> + bam_dmux_dma: dma-controller@4044000 {
> + compatible = "qcom,bam-v1.7.0";
> + reg = <0x04044000 0x19000>;
> + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
> + #dma-cells = <1>;
> + qcom,ee = <0>;
> +
> + num-channels = <6>;
> + qcom,num-ees = <1>;
> + qcom,powered-remotely;
> +
> + status = "disabled";
> + };
> +
> + mpss: remoteproc@4080000 {
> + compatible = "qcom,msm8916-mss-pil";
> + reg = <0x04080000 0x100>,
> + <0x04020000 0x040>;
> +
> + reg-names = "qdsp6", "rmb";
> +
> + interrupts-extended = <&intc GIC_SPI 24
> IRQ_TYPE_EDGE_RISING>,
> + <&hexagon_smp2p_in 0
> IRQ_TYPE_EDGE_RISING>,
> + <&hexagon_smp2p_in 1
> IRQ_TYPE_EDGE_RISING>,
> + <&hexagon_smp2p_in 2
> IRQ_TYPE_EDGE_RISING>,
> + <&hexagon_smp2p_in 3
> IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog", "fatal", "ready",
> + "handover", "stop-ack";
> +
> + power-domains = <&rpmpd MSM8916_VDDCX>,
> + <&rpmpd MSM8916_VDDMX>;
> + power-domain-names = "cx", "mx";
> +
> + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
> + <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
> + <&gcc GCC_BOOT_ROM_AHB_CLK>,
> + <&xo_board>;
> + clock-names = "iface", "bus", "mem", "xo";
> +
> + qcom,smem-states = <&hexagon_smp2p_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + resets = <&scm 0>;
> + reset-names = "mss_restart";
> +
> + qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
> +
> + status = "disabled";
> +
> + mba {
> + memory-region = <&mba_mem>;
> + };
> +
> + mpss {
> + memory-region = <&mpss_mem>;
> + };
> +
> + bam_dmux: bam-dmux {
> + compatible = "qcom,bam-dmux";
> +
> + interrupt-parent = <&hexagon_smsm>;
> + interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11
> IRQ_TYPE_EDGE_BOTH>;
> + interrupt-names = "pc", "pc-ack";
> +
> + qcom,smem-states = <&apps_smsm 1>, <&apps_smsm
> 11>;
> + qcom,smem-state-names = "pc", "pc-ack";
> +
> + dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
> + dma-names = "tx", "rx";
> +
> + status = "disabled";
> + };
> +
> + smd-edge {
> + interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
> +
> + qcom,smd-edge = <0>;
> + qcom,ipc = <&apcs 8 12>;
> + qcom,remote-pid = <1>;
> +
> + label = "hexagon";
> +
> + fastrpc {
> + compatible = "qcom,fastrpc";
> + qcom,smd-channels =
> "fastrpcsmd-apps-dsp";
> + label = "adsp";
> + qcom,non-secure-domain;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cb@1 {
> + compatible =
> "qcom,fastrpc-compute-cb";
> + reg = <1>;
> + };
> + };
> + };
> + };
> +
> + sound: sound@7702000 {
> + status = "disabled";
> + compatible = "qcom,apq8016-sbc-sndcard";
> + reg = <0x07702000 0x4>, <0x07702004 0x4>;
> + reg-names = "mic-iomux", "spkr-iomux";
> + };
> +
> + lpass: audio-controller@7708000 {
> + status = "disabled";
> + compatible = "qcom,apq8016-lpass-cpu";
> +
> + /*
> + * Note: Unlike the name would suggest, the SEC_I2S_CLK
> + * is actually only used by Tertiary MI2S while
> + * Primary/Secondary MI2S both use the PRI_I2S_CLK.
> + */
> + clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
> + <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>,
> + <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>,
> + <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
> + <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
> + <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
> + <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>;
> +
> + clock-names = "ahbix-clk",
> + "pcnoc-mport-clk",
> + "pcnoc-sway-clk",
> + "mi2s-bit-clk0",
> + "mi2s-bit-clk1",
> + "mi2s-bit-clk2",
> + "mi2s-bit-clk3";
> + #sound-dai-cells = <1>;
> +
> + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "lpass-irq-lpaif";
> + reg = <0x07708000 0x10000>;
> + reg-names = "lpass-lpaif";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + lpass_codec: audio-codec@771c000 {
> + compatible = "qcom,msm8916-wcd-digital-codec";
> + reg = <0x0771c000 0x400>;
> + clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
> + <&gcc GCC_CODEC_DIGCODEC_CLK>;
> + clock-names = "ahbix-clk", "mclk";
> + #sound-dai-cells = <1>;
> + };
> +
> + sdhc_1: mmc@7824000 {
> + compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4";
> + reg = <0x07824900 0x11c>, <0x07824000 0x800>;
> + reg-names = "hc", "core";
> +
> + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "hc_irq", "pwr_irq";
> + clocks = <&gcc GCC_SDCC1_AHB_CLK>,
> + <&gcc GCC_SDCC1_APPS_CLK>,
> + <&xo_board>;
> + clock-names = "iface", "core", "xo";
> + mmc-ddr-1_8v;
> + bus-width = <8>;
> + non-removable;
> + status = "disabled";
> + };
> +
> + sdhc_2: mmc@7864000 {
> + compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4";
> + reg = <0x07864900 0x11c>, <0x07864000 0x800>;
> + reg-names = "hc", "core";
> +
> + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "hc_irq", "pwr_irq";
> + clocks = <&gcc GCC_SDCC2_AHB_CLK>,
> + <&gcc GCC_SDCC2_APPS_CLK>,
> + <&xo_board>;
> + clock-names = "iface", "core", "xo";
> + bus-width = <4>;
> + status = "disabled";
> + };
> +
> + blsp_dma: dma-controller@7884000 {
> + compatible = "qcom,bam-v1.7.0";
> + reg = <0x07884000 0x23000>;
> + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP1_AHB_CLK>;
> + clock-names = "bam_clk";
> + #dma-cells = <1>;
> + qcom,ee = <0>;
> + };
> +
> + blsp1_uart1: serial@78af000 {
> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> + reg = <0x078af000 0x200>;
> + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc
> GCC_BLSP1_AHB_CLK>;
> + clock-names = "core", "iface";
> + dmas = <&blsp_dma 0>, <&blsp_dma 1>;
> + dma-names = "tx", "rx";
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&blsp1_uart1_default>;
> + pinctrl-1 = <&blsp1_uart1_sleep>;
> + status = "disabled";
> + };
> +
> + blsp1_uart2: serial@78b0000 {
> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
> + reg = <0x078b0000 0x200>;
> + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc
> GCC_BLSP1_AHB_CLK>;
> + clock-names = "core", "iface";
> + dmas = <&blsp_dma 2>, <&blsp_dma 3>;
> + dma-names = "tx", "rx";
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&blsp1_uart2_default>;
> + pinctrl-1 = <&blsp1_uart2_sleep>;
> + status = "disabled";
> + };
> +
> + blsp_i2c1: i2c@78b5000 {
> + compatible = "qcom,i2c-qup-v2.2.1";
> + reg = <0x078b5000 0x500>;
> + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
> + <&gcc GCC_BLSP1_AHB_CLK>;
> + clock-names = "core", "iface";
> + dmas = <&blsp_dma 4>, <&blsp_dma 5>;
> + dma-names = "tx", "rx";
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&i2c1_default>;
> + pinctrl-1 = <&i2c1_sleep>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + blsp_spi1: spi@78b5000 {
> + compatible = "qcom,spi-qup-v2.2.1";
> + reg = <0x078b5000 0x500>;
> + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
> + <&gcc GCC_BLSP1_AHB_CLK>;
> + clock-names = "core", "iface";
> + dmas = <&blsp_dma 4>, <&blsp_dma 5>;
> + dma-names = "tx", "rx";
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&spi1_default>;
> + pinctrl-1 = <&spi1_sleep>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + blsp_i2c2: i2c@78b6000 {
> + compatible = "qcom,i2c-qup-v2.2.1";
> + reg = <0x078b6000 0x500>;
> + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
> + <&gcc GCC_BLSP1_AHB_CLK>;
> + clock-names = "core", "iface";
> + dmas = <&blsp_dma 6>, <&blsp_dma 7>;
> + dma-names = "tx", "rx";
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&i2c2_default>;
> + pinctrl-1 = <&i2c2_sleep>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + blsp_spi2: spi@78b6000 {
> + compatible = "qcom,spi-qup-v2.2.1";
> + reg = <0x078b6000 0x500>;
> + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
> + <&gcc GCC_BLSP1_AHB_CLK>;
> + clock-names = "core", "iface";
> + dmas = <&blsp_dma 6>, <&blsp_dma 7>;
> + dma-names = "tx", "rx";
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&spi2_default>;
> + pinctrl-1 = <&spi2_sleep>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + blsp_i2c3: i2c@78b7000 {
> + compatible = "qcom,i2c-qup-v2.2.1";
> + reg = <0x078b7000 0x500>;
> + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
> + <&gcc GCC_BLSP1_AHB_CLK>;
> + clock-names = "core", "iface";
> + dmas = <&blsp_dma 8>, <&blsp_dma 9>;
> + dma-names = "tx", "rx";
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&i2c3_default>;
> + pinctrl-1 = <&i2c3_sleep>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + blsp_spi3: spi@78b7000 {
> + compatible = "qcom,spi-qup-v2.2.1";
> + reg = <0x078b7000 0x500>;
> + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
> + <&gcc GCC_BLSP1_AHB_CLK>;
> + clock-names = "core", "iface";
> + dmas = <&blsp_dma 8>, <&blsp_dma 9>;
> + dma-names = "tx", "rx";
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&spi3_default>;
> + pinctrl-1 = <&spi3_sleep>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + blsp_i2c4: i2c@78b8000 {
> + compatible = "qcom,i2c-qup-v2.2.1";
> + reg = <0x078b8000 0x500>;
> + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
> + <&gcc GCC_BLSP1_AHB_CLK>;
> + clock-names = "core", "iface";
> + dmas = <&blsp_dma 10>, <&blsp_dma 11>;
> + dma-names = "tx", "rx";
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&i2c4_default>;
> + pinctrl-1 = <&i2c4_sleep>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + blsp_spi4: spi@78b8000 {
> + compatible = "qcom,spi-qup-v2.2.1";
> + reg = <0x078b8000 0x500>;
> + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
> + <&gcc GCC_BLSP1_AHB_CLK>;
> + clock-names = "core", "iface";
> + dmas = <&blsp_dma 10>, <&blsp_dma 11>;
> + dma-names = "tx", "rx";
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&spi4_default>;
> + pinctrl-1 = <&spi4_sleep>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + blsp_i2c5: i2c@78b9000 {
> + compatible = "qcom,i2c-qup-v2.2.1";
> + reg = <0x078b9000 0x500>;
> + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
> + <&gcc GCC_BLSP1_AHB_CLK>;
> + clock-names = "core", "iface";
> + dmas = <&blsp_dma 12>, <&blsp_dma 13>;
> + dma-names = "tx", "rx";
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&i2c5_default>;
> + pinctrl-1 = <&i2c5_sleep>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + blsp_spi5: spi@78b9000 {
> + compatible = "qcom,spi-qup-v2.2.1";
> + reg = <0x078b9000 0x500>;
> + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
> + <&gcc GCC_BLSP1_AHB_CLK>;
> + clock-names = "core", "iface";
> + dmas = <&blsp_dma 12>, <&blsp_dma 13>;
> + dma-names = "tx", "rx";
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&spi5_default>;
> + pinctrl-1 = <&spi5_sleep>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + blsp_i2c6: i2c@78ba000 {
> + compatible = "qcom,i2c-qup-v2.2.1";
> + reg = <0x078ba000 0x500>;
> + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
> + <&gcc GCC_BLSP1_AHB_CLK>;
> + clock-names = "core", "iface";
> + dmas = <&blsp_dma 14>, <&blsp_dma 15>;
> + dma-names = "tx", "rx";
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&i2c6_default>;
> + pinctrl-1 = <&i2c6_sleep>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + blsp_spi6: spi@78ba000 {
> + compatible = "qcom,spi-qup-v2.2.1";
> + reg = <0x078ba000 0x500>;
> + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
> + <&gcc GCC_BLSP1_AHB_CLK>;
> + clock-names = "core", "iface";
> + dmas = <&blsp_dma 14>, <&blsp_dma 15>;
> + dma-names = "tx", "rx";
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&spi6_default>;
> + pinctrl-1 = <&spi6_sleep>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + usb: usb@78d9000 {
> + compatible = "qcom,ci-hdrc";
> + reg = <0x078d9000 0x200>,
> + <0x078d9200 0x200>;
> + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_USB_HS_AHB_CLK>,
> + <&gcc GCC_USB_HS_SYSTEM_CLK>;
> + clock-names = "iface", "core";
> + assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
> + assigned-clock-rates = <80000000>;
> + resets = <&gcc GCC_USB_HS_BCR>;
> + reset-names = "core";
> + phy_type = "ulpi";
> + dr_mode = "otg";
> + hnp-disable;
> + srp-disable;
> + adp-disable;
> + ahb-burst-config = <0>;
> + phy-names = "usb-phy";
> + phys = <&usb_hs_phy>;
> + status = "disabled";
> + #reset-cells = <1>;
> +
> + ulpi {
> + usb_hs_phy: phy {
> + compatible = "qcom,usb-hs-phy-msm8916",
> + "qcom,usb-hs-phy";
> + #phy-cells = <0>;
> + clocks = <&xo_board>, <&gcc
> GCC_USB2A_PHY_SLEEP_CLK>;
> + clock-names = "ref", "sleep";
> + resets = <&gcc GCC_USB2A_PHY_BCR>,
> <&usb 0>;
> + reset-names = "phy", "por";
> + qcom,init-seq = /bits/ 8 <0x0 0x44>,
> + <0x1 0x6b>,
> + <0x2 0x24>,
> + <0x3 0x13>;
> + };
> + };
> + };
> +
> + wcnss: remoteproc@a21b000 {
> + compatible = "qcom,pronto-v2-pil", "qcom,pronto";
> + reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>,
> <0x0a21b000 0x3000>;
> + reg-names = "ccu", "dxe", "pmu";
> +
> + memory-region = <&wcnss_mem>;
> +
> + interrupts-extended = <&intc GIC_SPI 149
> IRQ_TYPE_EDGE_RISING>,
> + <&wcnss_smp2p_in 0
> IRQ_TYPE_EDGE_RISING>,
> + <&wcnss_smp2p_in 1
> IRQ_TYPE_EDGE_RISING>,
> + <&wcnss_smp2p_in 2
> IRQ_TYPE_EDGE_RISING>,
> + <&wcnss_smp2p_in 3
> IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog", "fatal", "ready", "handover",
> "stop-ack";
> +
> + power-domains = <&rpmpd MSM8916_VDDCX>,
> + <&rpmpd MSM8916_VDDMX>;
> + power-domain-names = "cx", "mx";
> +
> + qcom,smem-states = <&wcnss_smp2p_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&wcnss_pin_a>;
> +
> + status = "disabled";
> +
> + wcnss_iris: iris {
> + /* Separate chip, compatible is board-specific
> */
> + clocks = <&rpmcc RPM_SMD_RF_CLK2>;
> + clock-names = "xo";
> + };
> +
> + smd-edge {
> + interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
> +
> + qcom,ipc = <&apcs 8 17>;
> + qcom,smd-edge = <6>;
> + qcom,remote-pid = <4>;
> +
> + label = "pronto";
> +
> + wcnss_ctrl: wcnss {
> + compatible = "qcom,wcnss";
> + qcom,smd-channels = "WCNSS_CTRL";
> +
> + qcom,mmio = <&wcnss>;
> +
> + wcnss_bt: bluetooth {
> + compatible = "qcom,wcnss-bt";
> + };
> +
> + wcnss_wifi: wifi {
> + compatible = "qcom,wcnss-wlan";
> +
> + interrupts = <GIC_SPI 145
> IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 146
> IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "tx", "rx";
> +
> + qcom,smem-states = <&apps_smsm
> 10>, <&apps_smsm 9>;
> + qcom,smem-state-names =
> "tx-enable", "tx-rings-empty";
> + };
> + };
> + };
> + };
> +
> + intc: interrupt-controller@b000000 {
> + compatible = "qcom,msm-qgic2";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + reg = <0x0b000000 0x1000>, <0x0b002000 0x2000>,
> + <0x0b001000 0x1000>, <0x0b004000 0x2000>;
> + interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) |
> IRQ_TYPE_LEVEL_HIGH)>;
> + };
> +
> + apcs: mailbox@b011000 {
> + compatible = "qcom,msm8916-apcs-kpss-global", "syscon";
> + reg = <0x0b011000 0x1000>;
> + #mbox-cells = <1>;
> + clocks = <&a53pll>, <&gcc GPLL0_VOTE>;
> + clock-names = "pll", "aux";
> + #clock-cells = <0>;
> + };
> +
> + a53pll: clock@b016000 {
> + compatible = "qcom,msm8916-a53pll";
> + reg = <0x0b016000 0x40>;
> + #clock-cells = <0>;
> + clocks = <&xo_board>;
> + clock-names = "xo";
> + };
> +
> + timer@b020000 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + compatible = "arm,armv7-timer-mem";
> + reg = <0x0b020000 0x1000>;
> + clock-frequency = <19200000>;
> +
> + frame@b021000 {
> + frame-number = <0>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b021000 0x1000>,
> + <0x0b022000 0x1000>;
> + };
> +
> + frame@b023000 {
> + frame-number = <1>;
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b023000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@b024000 {
> + frame-number = <2>;
> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b024000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@b025000 {
> + frame-number = <3>;
> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b025000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@b026000 {
> + frame-number = <4>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b026000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@b027000 {
> + frame-number = <5>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b027000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@b028000 {
> + frame-number = <6>;
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0b028000 0x1000>;
> + status = "disabled";
> + };
> + };
> +
> + cpu0_acc: power-manager@b088000 {
> + compatible = "qcom,msm8916-acc";
> + reg = <0x0b088000 0x1000>;
> + status = "reserved"; /* Controlled by PSCI firmware */
> + };
> +
> + cpu0_saw: power-manager@b089000 {
> + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
> + reg = <0x0b089000 0x1000>;
> + status = "reserved"; /* Controlled by PSCI firmware */
> + };
> +
> + cpu1_acc: power-manager@b098000 {
> + compatible = "qcom,msm8916-acc";
> + reg = <0x0b098000 0x1000>;
> + status = "reserved"; /* Controlled by PSCI firmware */
> + };
> +
> + cpu1_saw: power-manager@b099000 {
> + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
> + reg = <0x0b099000 0x1000>;
> + status = "reserved"; /* Controlled by PSCI firmware */
> + };
> +
> + cpu2_acc: power-manager@b0a8000 {
> + compatible = "qcom,msm8916-acc";
> + reg = <0x0b0a8000 0x1000>;
> + status = "reserved"; /* Controlled by PSCI firmware */
> + };
> +
> + cpu2_saw: power-manager@b0a9000 {
> + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
> + reg = <0x0b0a9000 0x1000>;
> + status = "reserved"; /* Controlled by PSCI firmware */
> + };
> +
> + cpu3_acc: power-manager@b0b8000 {
> + compatible = "qcom,msm8916-acc";
> + reg = <0x0b0b8000 0x1000>;
> + status = "reserved"; /* Controlled by PSCI firmware */
> + };
> +
> + cpu3_saw: power-manager@b0b9000 {
> + compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
> + reg = <0x0b0b9000 0x1000>;
> + status = "reserved"; /* Controlled by PSCI firmware */
> + };
> + };
> +
> + thermal-zones {
> + cpu0-1-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens 5>;
> +
> + trips {
> + cpu0_1_alert0: trip-point0 {
> + temperature = <75000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> + cpu0_1_crit: cpu-crit {
> + temperature = <110000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> +
> + cooling-maps {
> + map0 {
> + trip = <&cpu0_1_alert0>;
> + cooling-device = <&CPU0
> THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU1
> THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU2
> THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU3
> THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> + };
> +
> + cpu2-3-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens 4>;
> +
> + trips {
> + cpu2_3_alert0: trip-point0 {
> + temperature = <75000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> + cpu2_3_crit: cpu-crit {
> + temperature = <110000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> +
> + cooling-maps {
> + map0 {
> + trip = <&cpu2_3_alert0>;
> + cooling-device = <&CPU0
> THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU1
> THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU2
> THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> + <&CPU3
> THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> + };
> +
> + gpu-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens 2>;
> +
> + trips {
> + gpu_alert0: trip-point0 {
> + temperature = <75000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> + gpu_crit: gpu-crit {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + };
> +
> + camera-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens 1>;
> +
> + trips {
> + cam_alert0: trip-point0 {
> + temperature = <75000>;
> + hysteresis = <2000>;
> + type = "hot";
> + };
> + };
> + };
> +
> + modem-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <1000>;
> +
> + thermal-sensors = <&tsens 0>;
> +
> + trips {
> + modem_alert0: trip-point0 {
> + temperature = <85000>;
> + hysteresis = <2000>;
> + type = "hot";
> + };
> + };
> + };
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) |
> IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) |
> IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) |
> IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) |
> IRQ_TYPE_LEVEL_LOW)>;
> + };
> +};
> +
> +#include "msm8916-pins.dtsi"
> diff --git a/arch/arm/dts/pm8916.dtsi b/arch/arm/dts/pm8916.dtsi
> new file mode 100644
> index 000000000000..f4fb1a92ab55
> --- /dev/null
> +++ b/arch/arm/dts/pm8916.dtsi
> @@ -0,0 +1,183 @@
> +// SPDX-License-Identifier: GPL-2.0
> +#include <dt-bindings/iio/qcom,spmi-vadc.h>
> +#include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/spmi/spmi.h>
> +
> +&spmi_bus {
> +
> + pm8916_0: pmic@0 {
> + compatible = "qcom,pm8916", "qcom,spmi-pmic";
> + reg = <0x0 SPMI_USID>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pon@800 {
> + compatible = "qcom,pm8916-pon";
> + reg = <0x800>;
> + mode-bootloader = <0x2>;
> + mode-recovery = <0x1>;
> +
> + pwrkey {
> + compatible = "qcom,pm8941-pwrkey";
> + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
> + debounce = <15625>;
> + bias-pull-up;
> + linux,code = <KEY_POWER>;
> + };
> +
> + pm8916_resin: resin {
> + compatible = "qcom,pm8941-resin";
> + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
> + debounce = <15625>;
> + bias-pull-up;
> + status = "disabled";
> + };
> +
> + watchdog {
> + compatible = "qcom,pm8916-wdt";
> + interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>;
> + timeout-sec = <60>;
> + };
> + };
> +
> + pm8916_usbin: usb-detect@1300 {
> + compatible = "qcom,pm8941-misc";
> + reg = <0x1300>;
> + interrupts = <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>;
> + interrupt-names = "usb_vbus";
> + status = "disabled";
> + };
> +
> + pm8916_temp: temp-alarm@2400 {
> + compatible = "qcom,spmi-temp-alarm";
> + reg = <0x2400>;
> + interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
> + io-channels = <&pm8916_vadc VADC_DIE_TEMP>;
> + io-channel-names = "thermal";
> + #thermal-sensor-cells = <0>;
> + };
> +
> + pm8916_vadc: adc@3100 {
> + compatible = "qcom,spmi-vadc";
> + reg = <0x3100>;
> + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #io-channel-cells = <1>;
> +
> + adc-chan@0 {
> + reg = <VADC_USBIN>;
> + qcom,pre-scaling = <1 10>;
> + };
> + adc-chan@7 {
> + reg = <VADC_VSYS>;
> + qcom,pre-scaling = <1 3>;
> + };
> + adc-chan@8 {
> + reg = <VADC_DIE_TEMP>;
> + };
> + adc-chan@9 {
> + reg = <VADC_REF_625MV>;
> + };
> + adc-chan@a {
> + reg = <VADC_REF_1250MV>;
> + };
> + adc-chan@e {
> + reg = <VADC_GND_REF>;
> + };
> + adc-chan@f {
> + reg = <VADC_VDD_VADC>;
> + };
> + };
> +
> + rtc@6000 {
> + compatible = "qcom,pm8941-rtc";
> + reg = <0x6000>, <0x6100>;
> + reg-names = "rtc", "alarm";
> + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
> + };
> +
> + pm8916_mpps: mpps@a000 {
> + compatible = "qcom,pm8916-mpp", "qcom,spmi-mpp";
> + reg = <0xa000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + gpio-ranges = <&pm8916_mpps 0 0 4>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + pm8916_gpios: gpio@c000 {
> + compatible = "qcom,pm8916-gpio", "qcom,spmi-gpio";
> + reg = <0xc000>;
> + gpio-controller;
> + gpio-ranges = <&pm8916_gpios 0 0 4>;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + pm8916_1: pmic@1 {
> + compatible = "qcom,pm8916", "qcom,spmi-pmic";
> + reg = <0x1 SPMI_USID>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pm8916_pwm: pwm {
> + compatible = "qcom,pm8916-pwm";
> +
> + #pwm-cells = <2>;
> +
> + status = "disabled";
> + };
> +
> + pm8916_vib: vibrator@c000 {
> + compatible = "qcom,pm8916-vib";
> + reg = <0xc000>;
> + status = "disabled";
> + };
> +
> + wcd_codec: audio-codec@f000 {
> + compatible = "qcom,pm8916-wcd-analog-codec";
> + reg = <0xf000>;
> + reg-names = "pmic-codec-core";
> + clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
> + clock-names = "mclk";
> + interrupt-parent = <&spmi_bus>;
> + interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>,
> + <0x1 0xf0 0x1 IRQ_TYPE_NONE>,
> + <0x1 0xf0 0x2 IRQ_TYPE_NONE>,
> + <0x1 0xf0 0x3 IRQ_TYPE_NONE>,
> + <0x1 0xf0 0x4 IRQ_TYPE_NONE>,
> + <0x1 0xf0 0x5 IRQ_TYPE_NONE>,
> + <0x1 0xf0 0x6 IRQ_TYPE_NONE>,
> + <0x1 0xf0 0x7 IRQ_TYPE_NONE>,
> + <0x1 0xf1 0x0 IRQ_TYPE_NONE>,
> + <0x1 0xf1 0x1 IRQ_TYPE_NONE>,
> + <0x1 0xf1 0x2 IRQ_TYPE_NONE>,
> + <0x1 0xf1 0x3 IRQ_TYPE_NONE>,
> + <0x1 0xf1 0x4 IRQ_TYPE_NONE>,
> + <0x1 0xf1 0x5 IRQ_TYPE_NONE>;
> + interrupt-names = "cdc_spk_cnp_int",
> + "cdc_spk_clip_int",
> + "cdc_spk_ocp_int",
> + "mbhc_ins_rem_det1",
> + "mbhc_but_rel_det",
> + "mbhc_but_press_det",
> + "mbhc_ins_rem_det",
> + "mbhc_switch_int",
> + "cdc_ear_ocp_int",
> + "cdc_hphr_ocp_int",
> + "cdc_hphl_ocp_det",
> + "cdc_ear_cnp_int",
> + "cdc_hphr_cnp_int",
> + "cdc_hphl_cnp_int";
> + vdd-cdc-io-supply = <&pm8916_l5>;
> + vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>;
> + vdd-micbias-supply = <&pm8916_l13>;
> + #sound-dai-cells = <1>;
> + };
> + };
> +};
> diff --git a/include/dt-bindings/arm/coresight-cti-dt.h
> b/include/dt-bindings/arm/coresight-cti-dt.h
> new file mode 100644
> index 000000000000..61e7bdf8ea6e
> --- /dev/null
> +++ b/include/dt-bindings/arm/coresight-cti-dt.h
> @@ -0,0 +1,37 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * This header provides constants for the defined trigger signal
> + * types on CoreSight CTI.
> + */
> +
> +#ifndef _DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H
> +#define _DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H
> +
> +#define GEN_IO 0
> +#define GEN_INTREQ 1
> +#define GEN_INTACK 2
> +#define GEN_HALTREQ 3
> +#define GEN_RESTARTREQ 4
> +#define PE_EDBGREQ 5
> +#define PE_DBGRESTART 6
> +#define PE_CTIIRQ 7
> +#define PE_PMUIRQ 8
> +#define PE_DBGTRIGGER 9
> +#define ETM_EXTOUT 10
> +#define ETM_EXTIN 11
> +#define SNK_FULL 12
> +#define SNK_ACQCOMP 13
> +#define SNK_FLUSHCOMP 14
> +#define SNK_FLUSHIN 15
> +#define SNK_TRIGIN 16
> +#define STM_ASYNCOUT 17
> +#define STM_TOUT_SPTE 18
> +#define STM_TOUT_SW 19
> +#define STM_TOUT_HETE 20
> +#define STM_HWEVENT 21
> +#define ELA_TSTART 22
> +#define ELA_TSTOP 23
> +#define ELA_DBGREQ 24
> +#define CTI_TRIG_MAX 25
> +
> +#endif /*_DT_BINDINGS_ARM_CORESIGHT_CTI_DT_H */
> diff --git a/include/dt-bindings/clock/qcom,rpmcc.h
> b/include/dt-bindings/clock/qcom,rpmcc.h
> new file mode 100644
> index 000000000000..46309c9953b2
> --- /dev/null
> +++ b/include/dt-bindings/clock/qcom,rpmcc.h
> @@ -0,0 +1,174 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright 2015 Linaro Limited
> + */
> +
> +#ifndef _DT_BINDINGS_CLK_MSM_RPMCC_H
> +#define _DT_BINDINGS_CLK_MSM_RPMCC_H
> +
> +/* RPM clocks */
> +#define RPM_PXO_CLK 0
> +#define RPM_PXO_A_CLK 1
> +#define RPM_CXO_CLK 2
> +#define RPM_CXO_A_CLK 3
> +#define RPM_APPS_FABRIC_CLK 4
> +#define RPM_APPS_FABRIC_A_CLK 5
> +#define RPM_CFPB_CLK 6
> +#define RPM_CFPB_A_CLK 7
> +#define RPM_QDSS_CLK 8
> +#define RPM_QDSS_A_CLK 9
> +#define RPM_DAYTONA_FABRIC_CLK 10
> +#define RPM_DAYTONA_FABRIC_A_CLK 11
> +#define RPM_EBI1_CLK 12
> +#define RPM_EBI1_A_CLK 13
> +#define RPM_MM_FABRIC_CLK 14
> +#define RPM_MM_FABRIC_A_CLK 15
> +#define RPM_MMFPB_CLK 16
> +#define RPM_MMFPB_A_CLK 17
> +#define RPM_SYS_FABRIC_CLK 18
> +#define RPM_SYS_FABRIC_A_CLK 19
> +#define RPM_SFPB_CLK 20
> +#define RPM_SFPB_A_CLK 21
> +#define RPM_SMI_CLK 22
> +#define RPM_SMI_A_CLK 23
> +#define RPM_PLL4_CLK 24
> +#define RPM_XO_D0 25
> +#define RPM_XO_D1 26
> +#define RPM_XO_A0 27
> +#define RPM_XO_A1 28
> +#define RPM_XO_A2 29
> +#define RPM_NSS_FABRIC_0_CLK 30
> +#define RPM_NSS_FABRIC_0_A_CLK 31
> +#define RPM_NSS_FABRIC_1_CLK 32
> +#define RPM_NSS_FABRIC_1_A_CLK 33
> +
> +/* SMD RPM clocks */
> +#define RPM_SMD_XO_CLK_SRC 0
> +#define RPM_SMD_XO_A_CLK_SRC 1
> +#define RPM_SMD_PCNOC_CLK 2
> +#define RPM_SMD_PCNOC_A_CLK 3
> +#define RPM_SMD_SNOC_CLK 4
> +#define RPM_SMD_SNOC_A_CLK 5
> +#define RPM_SMD_BIMC_CLK 6
> +#define RPM_SMD_BIMC_A_CLK 7
> +#define RPM_SMD_QDSS_CLK 8
> +#define RPM_SMD_QDSS_A_CLK 9
> +#define RPM_SMD_BB_CLK1 10
> +#define RPM_SMD_BB_CLK1_A 11
> +#define RPM_SMD_BB_CLK2 12
> +#define RPM_SMD_BB_CLK2_A 13
> +#define RPM_SMD_RF_CLK1 14
> +#define RPM_SMD_RF_CLK1_A 15
> +#define RPM_SMD_RF_CLK2 16
> +#define RPM_SMD_RF_CLK2_A 17
> +#define RPM_SMD_BB_CLK1_PIN 18
> +#define RPM_SMD_BB_CLK1_A_PIN 19
> +#define RPM_SMD_BB_CLK2_PIN 20
> +#define RPM_SMD_BB_CLK2_A_PIN 21
> +#define RPM_SMD_RF_CLK1_PIN 22
> +#define RPM_SMD_RF_CLK1_A_PIN 23
> +#define RPM_SMD_RF_CLK2_PIN 24
> +#define RPM_SMD_RF_CLK2_A_PIN 25
> +#define RPM_SMD_PNOC_CLK 26
> +#define RPM_SMD_PNOC_A_CLK 27
> +#define RPM_SMD_CNOC_CLK 28
> +#define RPM_SMD_CNOC_A_CLK 29
> +#define RPM_SMD_MMSSNOC_AHB_CLK 30
> +#define RPM_SMD_MMSSNOC_AHB_A_CLK 31
> +#define RPM_SMD_GFX3D_CLK_SRC 32
> +#define RPM_SMD_GFX3D_A_CLK_SRC 33
> +#define RPM_SMD_OCMEMGX_CLK 34
> +#define RPM_SMD_OCMEMGX_A_CLK 35
> +#define RPM_SMD_CXO_D0 36
> +#define RPM_SMD_CXO_D0_A 37
> +#define RPM_SMD_CXO_D1 38
> +#define RPM_SMD_CXO_D1_A 39
> +#define RPM_SMD_CXO_A0 40
> +#define RPM_SMD_CXO_A0_A 41
> +#define RPM_SMD_CXO_A1 42
> +#define RPM_SMD_CXO_A1_A 43
> +#define RPM_SMD_CXO_A2 44
> +#define RPM_SMD_CXO_A2_A 45
> +#define RPM_SMD_DIV_CLK1 46
> +#define RPM_SMD_DIV_A_CLK1 47
> +#define RPM_SMD_DIV_CLK2 48
> +#define RPM_SMD_DIV_A_CLK2 49
> +#define RPM_SMD_DIFF_CLK 50
> +#define RPM_SMD_DIFF_A_CLK 51
> +#define RPM_SMD_CXO_D0_PIN 52
> +#define RPM_SMD_CXO_D0_A_PIN 53
> +#define RPM_SMD_CXO_D1_PIN 54
> +#define RPM_SMD_CXO_D1_A_PIN 55
> +#define RPM_SMD_CXO_A0_PIN 56
> +#define RPM_SMD_CXO_A0_A_PIN 57
> +#define RPM_SMD_CXO_A1_PIN 58
> +#define RPM_SMD_CXO_A1_A_PIN 59
> +#define RPM_SMD_CXO_A2_PIN 60
> +#define RPM_SMD_CXO_A2_A_PIN 61
> +#define RPM_SMD_AGGR1_NOC_CLK 62
> +#define RPM_SMD_AGGR1_NOC_A_CLK 63
> +#define RPM_SMD_AGGR2_NOC_CLK 64
> +#define RPM_SMD_AGGR2_NOC_A_CLK 65
> +#define RPM_SMD_MMAXI_CLK 66
> +#define RPM_SMD_MMAXI_A_CLK 67
> +#define RPM_SMD_IPA_CLK 68
> +#define RPM_SMD_IPA_A_CLK 69
> +#define RPM_SMD_CE1_CLK 70
> +#define RPM_SMD_CE1_A_CLK 71
> +#define RPM_SMD_DIV_CLK3 72
> +#define RPM_SMD_DIV_A_CLK3 73
> +#define RPM_SMD_LN_BB_CLK 74
> +#define RPM_SMD_LN_BB_A_CLK 75
> +#define RPM_SMD_BIMC_GPU_CLK 76
> +#define RPM_SMD_BIMC_GPU_A_CLK 77
> +#define RPM_SMD_QPIC_CLK 78
> +#define RPM_SMD_QPIC_CLK_A 79
> +#define RPM_SMD_LN_BB_CLK1 80
> +#define RPM_SMD_LN_BB_CLK1_A 81
> +#define RPM_SMD_LN_BB_CLK2 82
> +#define RPM_SMD_LN_BB_CLK2_A 83
> +#define RPM_SMD_LN_BB_CLK3_PIN 84
> +#define RPM_SMD_LN_BB_CLK3_A_PIN 85
> +#define RPM_SMD_RF_CLK3 86
> +#define RPM_SMD_RF_CLK3_A 87
> +#define RPM_SMD_RF_CLK3_PIN 88
> +#define RPM_SMD_RF_CLK3_A_PIN 89
> +#define RPM_SMD_MMSSNOC_AXI_CLK 90
> +#define RPM_SMD_MMSSNOC_AXI_CLK_A 91
> +#define RPM_SMD_CNOC_PERIPH_CLK 92
> +#define RPM_SMD_CNOC_PERIPH_A_CLK 93
> +#define RPM_SMD_LN_BB_CLK3 94
> +#define RPM_SMD_LN_BB_CLK3_A 95
> +#define RPM_SMD_LN_BB_CLK1_PIN 96
> +#define RPM_SMD_LN_BB_CLK1_A_PIN 97
> +#define RPM_SMD_LN_BB_CLK2_PIN 98
> +#define RPM_SMD_LN_BB_CLK2_A_PIN 99
> +#define RPM_SMD_SYSMMNOC_CLK 100
> +#define RPM_SMD_SYSMMNOC_A_CLK 101
> +#define RPM_SMD_CE2_CLK 102
> +#define RPM_SMD_CE2_A_CLK 103
> +#define RPM_SMD_CE3_CLK 104
> +#define RPM_SMD_CE3_A_CLK 105
> +#define RPM_SMD_QUP_CLK 106
> +#define RPM_SMD_QUP_A_CLK 107
> +#define RPM_SMD_MMRT_CLK 108
> +#define RPM_SMD_MMRT_A_CLK 109
> +#define RPM_SMD_MMNRT_CLK 110
> +#define RPM_SMD_MMNRT_A_CLK 111
> +#define RPM_SMD_SNOC_PERIPH_CLK 112
> +#define RPM_SMD_SNOC_PERIPH_A_CLK 113
> +#define RPM_SMD_SNOC_LPASS_CLK 114
> +#define RPM_SMD_SNOC_LPASS_A_CLK 115
> +#define RPM_SMD_HWKM_CLK 116
> +#define RPM_SMD_HWKM_A_CLK 117
> +#define RPM_SMD_PKA_CLK 118
> +#define RPM_SMD_PKA_A_CLK 119
> +#define RPM_SMD_CPUSS_GNOC_CLK 120
> +#define RPM_SMD_CPUSS_GNOC_A_CLK 121
> +#define RPM_SMD_MSS_CFG_AHB_CLK 122
> +#define RPM_SMD_MSS_CFG_AHB_A_CLK 123
> +#define RPM_SMD_BIMC_FREQ_LOG 124
> +#define RPM_SMD_LN_BB_CLK_PIN 125
> +#define RPM_SMD_LN_BB_A_CLK_PIN 126
> +
> +#endif
> diff --git a/include/dt-bindings/interconnect/qcom,msm8916.h
> b/include/dt-bindings/interconnect/qcom,msm8916.h
> new file mode 100644
> index 000000000000..359a75feb198
> --- /dev/null
> +++ b/include/dt-bindings/interconnect/qcom,msm8916.h
> @@ -0,0 +1,100 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Qualcomm interconnect IDs
> + *
> + * Copyright (c) 2019, Linaro Ltd.
> + * Author: Georgi Djakov <georgi.dja...@linaro.org>
> + */
> +
> +#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_MSM8916_H
> +#define __DT_BINDINGS_INTERCONNECT_QCOM_MSM8916_H
> +
> +#define BIMC_SNOC_SLV 0
> +#define MASTER_JPEG 1
> +#define MASTER_MDP_PORT0 2
> +#define MASTER_QDSS_BAM 3
> +#define MASTER_QDSS_ETR 4
> +#define MASTER_SNOC_CFG 5
> +#define MASTER_VFE 6
> +#define MASTER_VIDEO_P0 7
> +#define SNOC_MM_INT_0 8
> +#define SNOC_MM_INT_1 9
> +#define SNOC_MM_INT_2 10
> +#define SNOC_MM_INT_BIMC 11
> +#define PCNOC_SNOC_SLV 12
> +#define SLAVE_APSS 13
> +#define SLAVE_CATS_128 14
> +#define SLAVE_OCMEM_64 15
> +#define SLAVE_IMEM 16
> +#define SLAVE_QDSS_STM 17
> +#define SLAVE_SRVC_SNOC 18
> +#define SNOC_BIMC_0_MAS 19
> +#define SNOC_BIMC_1_MAS 20
> +#define SNOC_INT_0 21
> +#define SNOC_INT_1 22
> +#define SNOC_INT_BIMC 23
> +#define SNOC_PCNOC_MAS 24
> +#define SNOC_QDSS_INT 25
> +
> +#define BIMC_SNOC_MAS 0
> +#define MASTER_AMPSS_M0 1
> +#define MASTER_GRAPHICS_3D 2
> +#define MASTER_TCU0 3
> +#define MASTER_TCU1 4
> +#define SLAVE_AMPSS_L2 5
> +#define SLAVE_EBI_CH0 6
> +#define SNOC_BIMC_0_SLV 7
> +#define SNOC_BIMC_1_SLV 8
> +
> +#define MASTER_BLSP_1 0
> +#define MASTER_DEHR 1
> +#define MASTER_LPASS 2
> +#define MASTER_CRYPTO_CORE0 3
> +#define MASTER_SDCC_1 4
> +#define MASTER_SDCC_2 5
> +#define MASTER_SPDM 6
> +#define MASTER_USB_HS 7
> +#define PCNOC_INT_0 8
> +#define PCNOC_INT_1 9
> +#define PCNOC_MAS_0 10
> +#define PCNOC_MAS_1 11
> +#define PCNOC_SLV_0 12
> +#define PCNOC_SLV_1 13
> +#define PCNOC_SLV_2 14
> +#define PCNOC_SLV_3 15
> +#define PCNOC_SLV_4 16
> +#define PCNOC_SLV_8 17
> +#define PCNOC_SLV_9 18
> +#define PCNOC_SNOC_MAS 19
> +#define SLAVE_BIMC_CFG 20
> +#define SLAVE_BLSP_1 21
> +#define SLAVE_BOOT_ROM 22
> +#define SLAVE_CAMERA_CFG 23
> +#define SLAVE_CLK_CTL 24
> +#define SLAVE_CRYPTO_0_CFG 25
> +#define SLAVE_DEHR_CFG 26
> +#define SLAVE_DISPLAY_CFG 27
> +#define SLAVE_GRAPHICS_3D_CFG 28
> +#define SLAVE_IMEM_CFG 29
> +#define SLAVE_LPASS 30
> +#define SLAVE_MPM 31
> +#define SLAVE_MSG_RAM 32
> +#define SLAVE_MSS 33
> +#define SLAVE_PDM 34
> +#define SLAVE_PMIC_ARB 35
> +#define SLAVE_PCNOC_CFG 36
> +#define SLAVE_PRNG 37
> +#define SLAVE_QDSS_CFG 38
> +#define SLAVE_RBCPR_CFG 39
> +#define SLAVE_SDCC_1 40
> +#define SLAVE_SDCC_2 41
> +#define SLAVE_SECURITY 42
> +#define SLAVE_SNOC_CFG 43
> +#define SLAVE_SPDM 44
> +#define SLAVE_TCSR 45
> +#define SLAVE_TLMM 46
> +#define SLAVE_USB_HS 47
> +#define SLAVE_VENUS_CFG 48
> +#define SNOC_PCNOC_SLV 49
> +
> +#endif
> diff --git a/include/dt-bindings/reset/qcom,gcc-msm8916.h
> b/include/dt-bindings/reset/qcom,gcc-msm8916.h
> new file mode 100644
> index 000000000000..1f9be10872df
> --- /dev/null
> +++ b/include/dt-bindings/reset/qcom,gcc-msm8916.h
> @@ -0,0 +1,100 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright 2015 Linaro Limited
> + */
> +
> +#ifndef _DT_BINDINGS_RESET_MSM_GCC_8916_H
> +#define _DT_BINDINGS_RESET_MSM_GCC_8916_H
> +
> +#define GCC_BLSP1_BCR 0
> +#define GCC_BLSP1_QUP1_BCR 1
> +#define GCC_BLSP1_UART1_BCR 2
> +#define GCC_BLSP1_QUP2_BCR 3
> +#define GCC_BLSP1_UART2_BCR 4
> +#define GCC_BLSP1_QUP3_BCR 5
> +#define GCC_BLSP1_QUP4_BCR 6
> +#define GCC_BLSP1_QUP5_BCR 7
> +#define GCC_BLSP1_QUP6_BCR 8
> +#define GCC_IMEM_BCR 9
> +#define GCC_SMMU_BCR 10
> +#define GCC_APSS_TCU_BCR 11
> +#define GCC_SMMU_XPU_BCR 12
> +#define GCC_PCNOC_TBU_BCR 13
> +#define GCC_PRNG_BCR 14
> +#define GCC_BOOT_ROM_BCR 15
> +#define GCC_CRYPTO_BCR 16
> +#define GCC_SEC_CTRL_BCR 17
> +#define GCC_AUDIO_CORE_BCR 18
> +#define GCC_ULT_AUDIO_BCR 19
> +#define GCC_DEHR_BCR 20
> +#define GCC_SYSTEM_NOC_BCR 21
> +#define GCC_PCNOC_BCR 22
> +#define GCC_TCSR_BCR 23
> +#define GCC_QDSS_BCR 24
> +#define GCC_DCD_BCR 25
> +#define GCC_MSG_RAM_BCR 26
> +#define GCC_MPM_BCR 27
> +#define GCC_SPMI_BCR 28
> +#define GCC_SPDM_BCR 29
> +#define GCC_MM_SPDM_BCR 30
> +#define GCC_BIMC_BCR 31
> +#define GCC_RBCPR_BCR 32
> +#define GCC_TLMM_BCR 33
> +#define GCC_USB_HS_BCR 34
> +#define GCC_USB2A_PHY_BCR 35
> +#define GCC_SDCC1_BCR 36
> +#define GCC_SDCC2_BCR 37
> +#define GCC_PDM_BCR 38
> +#define GCC_SNOC_BUS_TIMEOUT0_BCR 39
> +#define GCC_PCNOC_BUS_TIMEOUT0_BCR 40
> +#define GCC_PCNOC_BUS_TIMEOUT1_BCR 41
> +#define GCC_PCNOC_BUS_TIMEOUT2_BCR 42
> +#define GCC_PCNOC_BUS_TIMEOUT3_BCR 43
> +#define GCC_PCNOC_BUS_TIMEOUT4_BCR 44
> +#define GCC_PCNOC_BUS_TIMEOUT5_BCR 45
> +#define GCC_PCNOC_BUS_TIMEOUT6_BCR 46
> +#define GCC_PCNOC_BUS_TIMEOUT7_BCR 47
> +#define GCC_PCNOC_BUS_TIMEOUT8_BCR 48
> +#define GCC_PCNOC_BUS_TIMEOUT9_BCR 49
> +#define GCC_MMSS_BCR 50
> +#define GCC_VENUS0_BCR 51
> +#define GCC_MDSS_BCR 52
> +#define GCC_CAMSS_PHY0_BCR 53
> +#define GCC_CAMSS_CSI0_BCR 54
> +#define GCC_CAMSS_CSI0PHY_BCR 55
> +#define GCC_CAMSS_CSI0RDI_BCR 56
> +#define GCC_CAMSS_CSI0PIX_BCR 57
> +#define GCC_CAMSS_PHY1_BCR 58
> +#define GCC_CAMSS_CSI1_BCR 59
> +#define GCC_CAMSS_CSI1PHY_BCR 60
> +#define GCC_CAMSS_CSI1RDI_BCR 61
> +#define GCC_CAMSS_CSI1PIX_BCR 62
> +#define GCC_CAMSS_ISPIF_BCR 63
> +#define GCC_CAMSS_CCI_BCR 64
> +#define GCC_CAMSS_MCLK0_BCR 65
> +#define GCC_CAMSS_MCLK1_BCR 66
> +#define GCC_CAMSS_GP0_BCR 67
> +#define GCC_CAMSS_GP1_BCR 68
> +#define GCC_CAMSS_TOP_BCR 69
> +#define GCC_CAMSS_MICRO_BCR 70
> +#define GCC_CAMSS_JPEG_BCR 71
> +#define GCC_CAMSS_VFE_BCR 72
> +#define GCC_CAMSS_CSI_VFE0_BCR 73
> +#define GCC_OXILI_BCR 74
> +#define GCC_GMEM_BCR 75
> +#define GCC_CAMSS_AHB_BCR 76
> +#define GCC_MDP_TBU_BCR 77
> +#define GCC_GFX_TBU_BCR 78
> +#define GCC_GFX_TCU_BCR 79
> +#define GCC_MSS_TBU_AXI_BCR 80
> +#define GCC_MSS_TBU_GSS_AXI_BCR 81
> +#define GCC_MSS_TBU_Q6_AXI_BCR 82
> +#define GCC_GTCU_AHB_BCR 83
> +#define GCC_SMMU_CFG_BCR 84
> +#define GCC_VFE_TBU_BCR 85
> +#define GCC_VENUS_TBU_BCR 86
> +#define GCC_JPEG_TBU_BCR 87
> +#define GCC_PRONTO_TBU_BCR 88
> +#define GCC_SMMU_CATS_BCR 89
> +
> +#endif
>
> --
> 2.42.1
>
