Hi, 1. Please change spl directory name to mmc_spl in line with nand_spl. regards, chander
On Mon, Mar 21, 2011 at 1:51 PM, Aneesh V <ane...@ti.com> wrote: > Hi, > > Are there anymore comments on this series? > > On Monday 28 February 2011 05:16 PM, Aneesh V wrote: > > This series adds mmc SPL support for OMAP4. This is essentially > > an up-streaming effort for TI's x-loader for OMAP4 using the SPL > > framework > > > > This work partly draws upon previous work done for x-loader by: > > Santosh Shilimkar<santosh.shilim...@ti.com> > > Rajendra Nayak<rna...@ti.com> > > and many others > > > > Features supported: > > * Clock init - DPLL locking, clock domains/modules enabling > > * SDRAM/DMM initialization > > * Mux initialization > > * MMC raw read support > > * MMC FAT read support > > > > Improvments over x-loader: > > * Code completely revamped > > * DPLL programming that works for all SYS_CLK frequencies > > * Automatic SDRAM identification and initialization > > * Board dependent parts(especially mux) deferred to u-boot. So, same > > SPL will work for Panda and SDP and most likely on any other board > > that comes along > > * Determination of u-boot size to avoid reading extra content while > > loading U-Boot > > * Modular apporach to enable future addition of support for all OMAP3/4 > > platforms > > > > Aneesh V (21): > > omap: add miscellaneous utility macros for bit-field operations > > omap4: add OMAP4430 revision check > > armv7: start.S: provide a hook for saving boot params > > omap4: save parameters passed by ROM code to SPL > > arm: new labels in the linker script file > > Add generic spl infrastructure > > armv7: start.S: add SPL support > > omap: add spl support > > omap4: add spl support for OMAP4 SDP > > omap4: add serial console support to SPL > > omap4: utility function to identify the context of hw init > > omap4: separate mux settings into essential and non essential parts > > omap4: correct mux data for sdp4430 > > omap4: add clock support > > omap4: add sdram init support > > omap4: calculate EMIF register values > > omap4: automatic sdram detection > > armv7: embed u-boot size within u-boot for use from SPL > > omap: add MMC support to SPL > > omap: spl: add FAT support over MMC > > omap4: add spl support for OMAP4 Panda > > > > John Rigby (1): > > mkimage: Add OMAP boot image support > > > > Makefile | 11 + > > arch/arm/cpu/armv7/cpu.c | 7 + > > arch/arm/cpu/armv7/omap-common/Makefile | 1 + > > .../{omap4/lowlevel_init.S => omap-common/utils.c} | 58 +- > > arch/arm/cpu/armv7/omap4/Makefile | 3 + > > arch/arm/cpu/armv7/omap4/board.c | 117 ++- > > arch/arm/cpu/armv7/omap4/clocks.c | 717 +++++++++++ > > arch/arm/cpu/armv7/omap4/emif.c | 1303 > ++++++++++++++++++++ > > arch/arm/cpu/armv7/omap4/lowlevel_init.S | 31 + > > arch/arm/cpu/armv7/omap4/omap4_mux_data.h | 76 ++ > > arch/arm/cpu/armv7/omap4/sdram_elpida.c | 267 ++++ > > arch/arm/cpu/armv7/start.S | 50 +- > > arch/arm/cpu/armv7/u-boot.lds | 4 + > > arch/arm/include/asm/arch-omap4/clocks.h | 504 ++++++++ > > arch/arm/include/asm/arch-omap4/emif.h | 1021 > +++++++++++++++ > > arch/arm/include/asm/arch-omap4/omap4.h | 50 +- > > arch/arm/include/asm/arch-omap4/sys_proto.h | 60 +- > > .../omap4/lowlevel_init.S => include/asm/armv7.h} | 32 +- > > arch/arm/include/asm/global_data.h | 5 + > > arch/arm/include/asm/omap_common.h | 106 ++ > > board/ti/panda/panda.c | 25 +- > > board/ti/{sdp4430/sdp.h => panda/panda_mux_data.h} | 76 +- > > board/ti/sdp4430/config.mk | 3 +- > > board/ti/sdp4430/sdp.c | 25 +- > > .../{panda/panda.h => sdp4430/sdp4430_mux_data.h} | 128 +-- > > common/image.c | 1 + > > include/configs/omap4_panda.h | 24 + > > include/configs/omap4_sdp4430.h | 24 + > > include/image.h | 1 + > > spl/board/ti/panda/Makefile | 219 ++++ > > spl/board/ti/sdp4430/Makefile | 219 ++++ > > spl/board/ti/spl-omap.c | 189 +++ > > .../armv7/u-boot.lds => spl/board/ti/spl-omap.lds | 70 +- > > tools/Makefile | 2 + > > tools/mkimage.c | 2 + > > tools/mkimage.h | 1 + > > tools/omapimage.c | 229 ++++ > > .../omap4/lowlevel_init.S => tools/omapimage.h | 49 +- > > 38 files changed, 5390 insertions(+), 320 deletions(-) > > copy arch/arm/cpu/armv7/{omap4/lowlevel_init.S => omap-common/utils.c} > (50%) > > create mode 100644 arch/arm/cpu/armv7/omap4/clocks.c > > create mode 100644 arch/arm/cpu/armv7/omap4/emif.c > > create mode 100644 arch/arm/cpu/armv7/omap4/omap4_mux_data.h > > create mode 100644 arch/arm/cpu/armv7/omap4/sdram_elpida.c > > create mode 100644 arch/arm/include/asm/arch-omap4/clocks.h > > create mode 100644 arch/arm/include/asm/arch-omap4/emif.h > > copy arch/arm/{cpu/armv7/omap4/lowlevel_init.S => include/asm/armv7.h} > (62%) > > create mode 100644 arch/arm/include/asm/omap_common.h > > rename board/ti/{sdp4430/sdp.h => panda/panda_mux_data.h} (76%) > > rename board/ti/{panda/panda.h => sdp4430/sdp4430_mux_data.h} (67%) > > create mode 100644 spl/board/ti/panda/Makefile > > create mode 100644 spl/board/ti/sdp4430/Makefile > > create mode 100644 spl/board/ti/spl-omap.c > > copy arch/arm/cpu/armv7/u-boot.lds => spl/board/ti/spl-omap.lds (57%) > > create mode 100644 tools/omapimage.c > > copy arch/arm/cpu/armv7/omap4/lowlevel_init.S => tools/omapimage.h > (53%) > > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot > -- thanks and regards, Chander M. Kashyap Contact Number: +919740798700 ------- TENSION LENE KA NAHI, DENE KE-----
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot