On Tue, Nov 28, 2023 at 3:21 PM Fabio Estevam <feste...@gmail.com> wrote: > > Hi Tim and Maxim, > > On Tue, Nov 28, 2023 at 8:05 PM Tim Harvey <thar...@gateworks.com> wrote: > > > Hi Maxim, > > > > I've tried this series on my imx8mm-venice boards and find that basic > > ping/dhcp/tftp breaks: > > u-boot=> net list > > eth0 : ethernet@30be0000 00:d0:12:78:f8:01 active > > u-boot=> setenv ipaddr 192.168.1.1 > > u-boot=> ping 192.168.1.146 > > eth0: ethernet@30be0000 00:d0:12:78:f8:01 active > > Using ethernet@30be0000 device > > pinging addr: 192.168.1.146 > > ping_tmo: ping failed; host 192.168.1.146 is not alive > > u-boot=> dhcp > > init already done for ethernet@30be0000 > > dhcp_tmo 20/20 > > dhcp_tmo 19/20 > > dhcp_tmo 18/20 > > dhcp_tmo 17/20 > > dhcp_tmo 16/20 > > dhcp_tmo 15/20 > > dhcp_tmo 14/20 > > dhcp_tmo 13/20 > > dhcp_tmo 12/20 > > dhcp_tmo 11/20 > > dhcp_tmo 10/20 > > dhcp_tmo 9/20 > > dhcp_tmo 8/20 > > dhcp_tmo 7/20 > > dhcp_tmo 6/20 > > dhcp_tmo 5/20 > > dhcp_tmo 4/20 > > dhcp_tmo 3/20 > > dhcp_tmo 2/20 > > dhcp_tmo 1/20 > > dhcp_tmo 0/20 > > DHCP client timeout > > I got the same result on a custom imx8mn-based board. > > > u-boot=> tftpboot $loadaddr venice/Image > > init already done for ethernet@30be0000 > > TFTP from server 192.168.1.146; our IP address is 192.168.1.1 > > Filename 'venice/Image'. > > Load address: 0x48200000 > > Loading: > > ^ cntl-c after a minute or so of no output > > > > Is there some basic config here that I may have wrong? > > > > Also, while trying to see if I can determine where things broke I > > noticed there is build breakage starting with 'net/lwip: integrate > > lwIP library' > > In file included from net/lwip/lwip-external/src/core/init.c:38: > > ./net/lwip/lwip-external/src/include/lwip/opt.h:51:10: fatal error: > > lwipopts.h: > > No such file or directory > > 51 | #include "lwipopts.h" > > | ^~~~~~~~~~~~ > > compilation terminated. > > make[2]: *** [scripts/Makefile.build:256: > > net/lwip/lwip-external/src/core/init.o > > ] Error 1 > > make[1]: *** [scripts/Makefile.build:397: net/lwip] Error 2 > > make: *** [Makefile:1858: net] Error 2 > > I haven't noticed this build error here though. I applied Maxim's > series against master.
Fabio, You won't see this build issue with the entire series applied... only with the patches up to and including 'net/lwip: integrate lwIP library'. My point was there are points in the series where compilation fails which is not ok. Tim