The "fdt" command is convenient for making small changes to the OS FDT, especially during development. This is easy when the kernel and FDT are loaded separately, but can be cumbersome for FIT images, requiring to unpack the image, manually apply overlays, etc.
Add an option to execute a command "fdt_fixup" from the environment at the beginning of image_setup_libfdt() (after overlays are applied, and before the other fixups). Signed-off-by: Matthias Schiffer <matthias.schif...@ew.tq-group.com> --- boot/Kconfig | 9 +++++++++ boot/image-fdt.c | 19 +++++++++++++++++-- 2 files changed, 26 insertions(+), 2 deletions(-) diff --git a/boot/Kconfig b/boot/Kconfig index ef71883a502..7eea935f490 100644 --- a/boot/Kconfig +++ b/boot/Kconfig @@ -1502,6 +1502,15 @@ if OF_LIBFDT menu "Devicetree fixup" +config OF_ENV_SETUP + bool "Run a command from environment to set up device tree before boot" + depends on CMD_FDT + help + This causes U-Boot to run a command from the environment variable + fdt_fixup before booting into the operating system, which can use the + fdt command to modify the device tree. The device tree is then passed + to the OS. + config OF_BOARD_SETUP bool "Set up board-specific details in device tree before boot" help diff --git a/boot/image-fdt.c b/boot/image-fdt.c index f10200f6474..78b5c639381 100644 --- a/boot/image-fdt.c +++ b/boot/image-fdt.c @@ -9,6 +9,7 @@ */ #include <common.h> +#include <command.h> #include <fdt_support.h> #include <fdtdec.h> #include <env.h> @@ -608,8 +609,22 @@ int image_setup_libfdt(struct bootm_headers *images, void *blob, { ulong *initrd_start = &images->initrd_start; ulong *initrd_end = &images->initrd_end; - int ret = -EPERM; - int fdt_ret; + int ret, fdt_ret; + + if (IS_ENABLED(CONFIG_OF_ENV_SETUP)) { + const char *fdt_fixup; + + fdt_fixup = env_get("fdt_fixup"); + if (fdt_fixup) { + set_working_fdt_addr(map_to_sysmem(blob)); + ret = run_command_list(fdt_fixup, -1, 0); + if (ret) + printf("WARNING: fdt_fixup command returned %d\n", + ret); + } + } + + ret = -EPERM; if (fdt_root(blob) < 0) { printf("ERROR: root node setup failed\n"); -- TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany Amtsgericht München, HRB 105018 Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider https://www.tq-group.com/